Accesorios

TeSys D suppressor module, for LC1D09-D38, LC1DT20-DT40 contactors and CAD control relays. To be used with 12-24V DC control circuit voltage, it provides a bidirectional peak limiting diodes protection limiting the transient voltage to 2 Uc max. Clip-on side mounting, overall size of the contactor is unchanged. Green Premium compliant (RoHS/REACh).

TeSys D mechanical interlock, for contactors LC1D40A-D80A and LC1DT60A-DT80A. To be used for reversing and changeover contactor assemblies. Without electrical interlocking. Green Premium compliant (RoHS/REACh).

The TeSys F Power Connection Set is designed to facilitate the assembly of pairs of 3-pole contactors, specifically LC1F185 and CR1F185. This set is ideal for horizontal assembling of identical contactors in reversing applications. It includes a total of six pieces, consisting of top and bottom connections.This product adheres to Green Premium standards, ensuring compliance with RoHS/REACh directives. The TeSys F Power Connection Set is a reliable solution for enhancing the functionality of your contactors in various industrial applications.

TeSys D set of power connections, for 3-pole contactors LC1D80, LP1D80, LC1D95. To be used for assembling contactors in reversing motor starters. It includes a set of parallel bars for the line side, a set of reverser bars for the load side. It conforms to RoHS/REACh regulation.

TeSys F mechanical interlock kit, for assembling pairs of contactors LC1 F115, F150 and CR1 F150. To be used in horizontal assembling of 3-pole and 4-pole identical contactors, for reversing and changeover applications. It conforms to RoHS/REACh regulation.

The TeSys F mechanical interlock is a versatile solution designed to facilitate the assembly of pairs of contactors. This kit is specifically tailored for assembling LC1 F185, F225, and CR1 F185 contactors in a horizontal configuration. It is ideal for applications requiring reversing or changeover functionality. Key Features: Compatible with 3-pole and 4-pole identical contactors Conforms to RoHS/REACh regulation

These accessories are spreader kit for TeSys Giga 265-500 contactor, 45mm-70mm connection. It is used to 3 Poles electrical circuit. They are screwed to the contactor terminals to increase the pitch between poles from 45mm to 70mm. The rated current is up to 500 A. It can cover -25°C to 60°C operation ambient air temperature, No derating up to 3000m altitude. Green Premium compliant (RoHs/Reach).

TeSys F power terminal protection shrouds, for 3-pole contactors LC1 F225, F265, F330, F400, F500 and CR1 F265, F400, F500, and thermal overload relays LR9 F75, F79, F81, F*75, F*79, F*81. Set of 6 units. The shrouds protect against direct contact on terminals by providing a front face IP20 protection. One shroud per power terminal, to be attached to the connection screw of the terminal. Green Premium compliant (RoHS/REACh).

These accessories are terminal shrouds for TeSys Giga 115-225 contactor. It is used to 3 Poles electrical circuit. It provides IP20 protection conforming to IEC 60529. It can cover -25°C to 60°C operation ambient air temperature, No derating up to 3000m altitude. Green Premium compliant (RoHs/Reach).

The TeSys F power terminal protection shrouds are designed to safeguard 3-pole contactors LC1 F115 and thermal overload relays LR9 F57. This set includes six units, each providing a front face IP20 protection. Each shroud is specifically tailored for one power terminal, attaching directly to the connection screw of the terminal. Compliant with Green Premium standards (RoHS/REACh).

The Schneider Electric Mechanical Interlock for TeSys Deca contactors LC1D80-D95 with AC coils is designed to facilitate reversing and changeover contactor assemblies. This accessory ensures mechanical interlocking without the need for electrical interlocking, providing a streamlined and efficient solution for your automation needs. Conforming to RoHS/REACh regulations, it supports sustainable and environmentally friendly practices. The interlock is easy to install, enhancing the modern look and feel of your machinery while simplifying wiring tasks. With its robust design and reliable performance, it is an essential component for maintaining the efficiency and safety of your electrical systems.

This accessory is a rubber seal providing IP65 protection, specifically designed for the Harmony Series K1/K2. It is compatible with 4 holes front mounting operating heads and Ø 22 mm front mounting operating heads, both utilizing 60 x 60 mm front plates. Each set contains 5 units, facilitating easy installation for switch-disconnectors in a variety of applications.The product meets environmental standards, being free of substances of very high concern and compliant with RoHS regulations. It is part of the Green Premium product initiative, ensuring it is mercury-free and does not contain toxic heavy metals. The environmental disclosure number is ENVPEP2211006, and the product adheres to the California Proposition 65 regulations.

TeSys D mounting kit for star-delta starter assembly, for 3-pole contactors LC1D40A-D80A. For assembling 3 identical contactors horizontally mounted, connection by screw clamp Everlink terminals. It contains a mechanical interlock LAD4CM, power circuit connections, a time delay contact block LADS2 (1-30s). It conforms to RoHS/REACh regulation.

TeSys D mounting kit, for star-delta starter assembly with 3-pole contactors LC1D09-D38 (star contactor physically smaller in depth). For motor applications up to 25kW@400V in delta connection. It contains power circuit connections, screws and clamps for fixing 3 contactors to a plate, a time delay contact block LADS2 (1-30s). Green Premium compliant (RoHS/REACh).

TeSys Deca mechanical latch block, for LC1D09-D80A, LC1DT20-DT80A contactors and CAD control relays (except devices with low consumption coils). Electrical latching and unlatching is performed applying a 24V control voltage pulse (> 100ms in AC, 250ms in DC). Unlatching can be manually operated. Clip-on mounting on front of contactor, connection by screw terminals. For applications with high operating rates until 1200 cycles/hour. Multi standards certified (IEC, UL, CSA), Green Premium compliant (RoHS/REACh).

TeSys Deca mechanical latch block, for LC1D09-D80A, LC1DT20-DT80A contactors and CAD control relays (except devices with low consumption coils). Electrical latching and unlatching is performed applying a 110-127V control voltage pulse (> 100ms in AC, 250ms in DC). Unlatching can be manually operated. Clip-on mounting on front of contactor, connection by screw terminals. For applications with high operating rates until 1200 cycles/hour. Multi standards certified (IEC, UL, CSA), Green Premium compliant (RoHS/REACh).

The TeSys D suppressor module is a crucial component for enhancing the safety and reliability of electrical systems. Designed for use with LC1D09-D38 and LC1DT20-DT40 contactors, as well as CAD control relays, this module offers varistor protection that limits transient voltage to a maximum of 2 Uc.With its clip-on side mounting feature, the suppressor module does not alter the overall size of the contactor. This ensures seamless integration into existing systems without any additional space requirements.The TeSys D suppressor module is RoHS/REACh compliant, making it a green premium choice for those who prioritize environmental sustainability in their industrial applications.

Schneider Electric TeSys D Mounting Kit is designed specifically for star-delta starter assembly with Schneider Electric's 3-pole contactors LC1D09-D38. This kit is ideal for motor applications up to 25kW@400V in delta connection. The kit contains all necessary components for power circuit connections, including screws and clamps for fixing the three contactors to a plate. Additionally, it includes a time delay contact block LADS2 (1-30s), ensuring smooth operation of your motor applications. Green Premium compliant, this kit adheres to RoHS/REACh standards, making it an environmentally friendly choice for your industrial needs. With its robust construction and reliable performance, the Schneider Electric TeSys D Mounting Kit is a must-have for any industrial setup.

The TeSys D Separate Mount Kit is designed for the mounting of thermal overload relays LRD01 to LRD35 and electronic overcurrent relays LR3D01 to LR3D35. This kit provides a separate mounting solution between the overload relay and contactor, ensuring optimal performance.The kit features top connections with screw clamp terminals, offering flexibility in installation. It also includes clip-on fixing on 35 mm DIN-rail or fixing by screws for added convenience. This product is compliant with Green Premium standards (RoHS/REACh).

TeSys D kit for changeover contactors assembly, for 3-pole contactors LC1D40A-D80A. For assembling 2 identical contactors horizontally mounted, connection by screw clamp Everlink terminals. It contains a mechanical interlock LAD4CM, a parallel power busbar LA9D65A6. It conforms to RoHS/REACh regulation.