Accesorios generales

The HC-BB32-I-PT-F contact insert is engineered for power applications, offering a configuration of 32 positions plus PE. This component includes 32 power contacts and requires a minimum housing…

The surge protection device LIT 2X2-24 is designed for integration into a DIN rail system, providing protection for two floating signal circuits. The module's compact width of 6.2 mm accommodates…

The fast-acting A3T Class T fuses are engineered for high current-limitation while maintaining a compact size. Their distinct dimensions ensure that they cannot be replaced with fuses of lower…

The Thermal Unit, Type S, Type B, is specifically engineered to safeguard motors, controllers, and branch-circuit conductors from overheating caused by sustained over-currents, including locked rotor…

This printed circuit board terminal is designed with a pitch of 3.81 mm and accommodates 21 poles at a 135° conductor outlet direction. The LSF-SMT 3.81/21/135 1.5SN BK TU model features a solder pin…

This socket is equipped with a pin connector pattern type L and utilizes a push-in spring connection, making it suitable for various applications in Italy and other countries. It includes an extended…

The marker strip, designated as ZB 12 CUS , is engineered for integration into terminal blocks with a width of 12.2 mm. This strip is crafted from PA material, ensuring compatibility with ambient…

The UC-EM (19X9) YE snap-in markers are designed for efficient labeling in various applications. Each sheet contains 20 yellow markers that can be customized using labeling technologies such as…

The HC-STA-A16PT-BWS-HS-M25-ELCAL connector set is designed for robust applications, ensuring a high degree of protection with an IP67 rating. This set accommodates 16 positions and is constructed…

The 4-position M12 SPEEDCON connector, designated as SACC-MS-4CON-PG 7-M SCO , is designed for various universal applications. This connector utilizes a straight cable outlet and accommodates…

The FMC 1,5/ 4-ST-3,81 is a printed-circuit board connector designed for reliable electrical connections. It supports a nominal cross section of 1.5 mm² and is capable of handling a nominal current…

The PTSM 0,5/ 5-P-2,5 is a printed circuit board connector designed for reliable electrical connections in various applications. It accommodates a nominal cross-section of 0.5 mm² and can handle a…

The PST 1,0/16-3,5 pin strip features a nominal cross section of 0.5 mm² and is designed for male connector applications. This component supports up to 8 A nominal current, contingent upon the plug…

The UM-ALU 4-100,5 PROFILE 200 is characterized by its extruded profile housings made of anodized aluminum. With an external width of 105 mm and an internal width of 100.5 mm, this profile has a…

The FLT-SEC-P-T1-1C-350/25-FM is a plug-in lightning current arrester suitable for 1-phase power supply systems that utilize a combined PE and N conductor configuration (L1, PEN). It adheres to Type…

The surge protection device, designated as TTC-6P-3-HF-M-12DC-PT-I , is designed for high-frequency applications and telecommunications interfaces without supply voltage. It includes a protective…

The NRN series fuses, rated at 250V and 300A, are classified under Class H and are designed for non-time delay applications. This product features a short circuit rating of 10kA, ensuring reliable…

This printer ribbon is a self-contained cartridge specifically formulated for use with the TLS 2200® and TLS-PC Link™ Thermal Labeling Systems. The ribbon measures 50.80 mm in width and extends to…

The LMZFL 7/2/135 3.5SW is designed for use in electronic circuits, providing reliable connections through its tension clamp connection method with an actuator. This terminal supports a maximum…

The unmarked legend plate is designed for customization of control units, enabling users to incorporate specific legends for enhanced operational support. This accessory is compatible with standard…