Accionamientos y motores

This Altivar Process ATV600 variable speed drive can feed 3-phase synchronous and asynchronous power motors. It features 3 built-in RJ45 communication ports as standard, 1 Ethernet port, 2 serial ports. It works at a rated supply voltage from 380V to 480V AC. This drive provides up to 30% energy saving when on standby due to the innovative ‘‘Stop and Go’’operation without additional costs. It is suitable for motors with power rating up to 11kW / 15hp for applications requiring slight overload (up to 120%). It is suitable for motors with power rating up to 7.5kW / 10hp for applications requiring significant overload (up to 150%). It weighs 7.7kg and its dimensions are, 171mm wide, 409mm high, 233mm deep. This drive is focused on fluids management processing and energy saving, it offers extensive flexibility in water and wastewater, mining, minerals and metals, oil and gas and food and beverage applications. Accessories (fan kit, graphic display terminal) and options (I/O expansion modules, communication modules, EMC input filters) are available with Altivar Process ATV600 drives, depending on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a wall. This new concept of drives meets the major needs of process and utilities in terms of equipment efficiency and total cost of ownership by supporting the energy management, asset management and also the overall performance of the process.

This Altivar 320 variable speed drive can feed 3-phase synchronous and asynchronous motors. Its book form factor allows for a simple and compact installation in your automation cabinets. It works at a rated power up to 11kW / 15hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).

Altivar Machine ATV12 is an offer of variable speed drives for commercial equipment and simple machines. It works at a rated power up to 2.2kW / 3hp and a rated voltage from 200V to 240V AC. It is designed with heatsink for normal environments and fan-cooled enclosure. It has advanced PID and catch on the fly functions, basic cabling, and easy motor control setting. Based on the needs, it can be delivered without heatsink, with embedded EMC filter, or as standard version. The Altivar 12 drive integrates as standard the Modbus communication protocol. This Altivar Machine ATV12 is designed for simple applications, in industry, commercial machines and HVAC machines such as conveyors, pumps, extractors, access barriers and treadmills. It conforms to IEC, UL and other international standards. SoMove software compatibility enables saving and transfering of configurations to spare drive, reducing maintenance downtime. It features an optimized application of power and torque for ventilation and pumping applications, this allows up to 30% energy savings.

The ATV320 variable speed drive is designed specifically for Original Equipment Manufacturers (OEMs) and operates efficiently with single-phase synchronous and asynchronous motors. With a rated power of 0.37kW and a voltage range from 200V to 240V, this drive is capable of handling various applications.This model features an IP65 rating, allowing it to be used in harsh environments where it can be cleaned of dust and chemical pollutants. The drive is fanless and includes an embedded C2 EMC filter, ensuring compliance with electromagnetic compatibility standards. Communication interfaces such as Modbus and CANopen are standard, accessible via an RJ45 connector on the front.Weighing 5.5kg, the ATV320 incorporates five safety functions configurable through SoMove software, enhancing machine safety. This drive is suitable for a variety of applications including conveyors, carton packers, gantry cranes, woodworking, and the food and beverage sector. It meets multiple international standards including IEC and UL, ensuring its reliability.The EcoStruxure Machine software compatibility allows for comprehensive machine development and integration, including network automation functions. This drive can be installed individually or in multi-drive configurations, providing flexibility for simple and advanced machine requirements. The ATV320 series emphasizes ease of integration, proven motor control, and connectivity.

The ATV320 variable speed drive supports a rated power of 15kW and operates effectively within a voltage range of 525V to 600V AC. Its compact design facilitates vertical stacking, enabling efficient use of space within machine frames. This drive is tailored for complex machine applications and boasts a nominal output current of 22.0 A. Designed to endure harsh environments, the ATV320 is equipped with IEC 60721-3-3 class 3C3 coated printed circuit boards, allowing operation at ambient temperatures up to 60°C without additional cooling. The drive integrates advanced features such as torque and speed accuracy at low speeds, high dynamic performance via flux vector control without sensors, and an extended frequency range suitable for high-speed motors. Safety is addressed with five built-in functions configurable through SoMove software, ensuring compliance with safety standards whether used alongside a Preventa safety module or independently. The product's dimensions are 180mm wide, 330mm high, and 198mm deep, with a weight of 6.5kg. It conforms to various international standards, including IEC, UL, TUV, and KC, and is designed for vertical mounting with four fixing holes. Additional options such as braking resistors, line chokes, and EMC filters are available depending on the drive rating. The ATV320 integrates seamlessly with Schneider Electric's EcoStruxure Machine for configuration and diagnostics.

The Altivar Machine ATV320 variable speed drive is a robust solution capable of powering both synchronous and asynchronous 3-phase motors. Its compact design, featuring a book form factor, allows for easy installation within automation cabinets. It operates at a rated power of up to 0.55kW/0.75hp and a voltage range from 380V to 500V AC. The drive is designed to withstand harsh environmental conditions, such as ambient temperatures up to 60°C, without the need for additional cooling. It incorporates functions suitable for various applications, including torque and speed accuracy at low speeds, high dynamic performance with flux vector control, and extended frequency range for high-speed motors. The drive software includes five safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions can be configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) with simple and advanced application requirements covered in packaging, material handling, textile, material working, mechanical actuators, and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions) and is CE, UL, CSA, NOM, EAC, and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The drive is designed to be mounted in a vertical position (+/- 10 °) on a panel, thanks to four fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM and can be configured, controlled, and diagnosed directly in SoMachine and SoMove software by means of the same software brick (DTM).

The variable speed drive offers precise control for simple machines and commercial equipment, operating effectively within a power rating of 0.75kW and a voltage range of 200 to 240V. It is designed to accommodate three-phase asynchronous motors, making it suitable for various applications including conveyors, pumps, and HVAC systems.With an integrated Modbus communication protocol, this drive facilitates straightforward connectivity and control. It features adjustable PID regulation, basic cabling, and motor control settings that can be easily configured. The drive weighs 0.7 kg and is compliant with multiple international standards including IEC and UL.Environmental resilience is provided through a robust design, allowing operation at altitudes up to 3,000 meters with appropriate derating. The drive also offers protection against overvoltage, undervoltage, and overheating, thus ensuring reliability under demanding conditions. Furthermore, the compatibility with SoMove software streamlines configuration management, minimizing maintenance downtime.

The Schneider Electric Altivar Machine ATV12 is a versatile variable frequency drive (VFD) engineered for use in a wide range of commercial and light industrial equipment, including simple machines. Designed to operate within a voltage range of 200–240V AC, this VFD supports motor ratings up to 2.2kW or 3 horsepower. A standard heatsink is integrated into the design to facilitate effective thermal management in typical operating environments; fan-cooled enclosure options are also available. The Altivar 12 incorporates advanced functionalities such as PID control and ‘catch on the fly’ capabilities, alongside simplified cabling for straightforward installation and intuitive motor control configuration. The drive's flexibility allows for various configurations including delivery without a heatsink, integration of an embedded EMC filter, or standard version. Communication is facilitated through the integrated Modbus protocol. Suitable for applications like conveyors, pumps, ventilation systems, access barriers, and treadmills, the Altivar 12 finds utility in industrial, commercial, and HVAC sectors. The drive adheres to stringent international standards including IEC and UL certifications. Utilizing SoMove software compatibility, users can efficiently save and transfer configurations between drives, minimizing maintenance downtime. Optimized power and torque management contribute to energy savings of up to 30%, particularly beneficial for ventilation and pumping applications.

The ATV320 variable speed drive operates at a rated power of up to 0.37 kW (0.5 hp) and supports a voltage range of 200V to 240V AC. Its compact design facilitates vertical stacking within machine frames, optimizing space utilization.With an operational capability at ambient temperatures of up to 60°C without additional cooling, this drive is engineered for harsh environments, featuring a robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards. It ensures high machine availability in challenging conditions.The drive incorporates advanced functionalities, such as torque and speed accuracy at low speeds, high dynamic performance through flux vector control without sensor feedback, and an extended frequency range for high-speed motors. It facilitates parallel motor connections and offers energy-saving modes for open-loop synchronous motors using voltage/frequency ratios.Equipped with five configurable safety functions, it meets essential safety standards, whether utilized independently or in conjunction with a Preventa safety module. Configuration and programming can be seamlessly managed via SoMove software.Designed primarily for Original Equipment Manufacturers (OEMs), it addresses both simple and complex application needs across various sectors, including packaging, material handling, textile, and mechanical actuation. Compliance with international standards such as IEC/EN 61800-5-1 and IEC/EN 61800-3 is ensured, along with certifications including CE, UL, and CSA.The ATV320 is compatible with external accessories and options, depending on the drive rating, and is designed for vertical mounting (+/- 10°) with four fixing holes. It integrates fully with Schneider Electric’s EcoStruxure Machine, enabling direct configuration, control, and diagnostics through SoMachine software using the same software brick (DTM).

This Altivar 320 variable speed drive can feed 3-phase synchronous and asynchronous motors. Its book form factor allows for a simple and compact installation in your automation cabinets. It works at a rated power up to 0.37kW / 0.5hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).

Altivar Machine ATV12 is an offer of variable speed drives for commercial equipment and simple machines. It works at a rated power up to 0.75kW / 1hp and a rated voltage from 200V to 240V AC. It is designed on a base plate for mounting on the machine frame. The frame surface area should allow heat to dissipate. It has advanced PID and catch on the fly functions, basic cabling, and easy motor control setting. Based on the needs, it can be delivered without heatsink, with embedded EMC filter, or as standard version. The Altivar 12 drive integrates as standard the Modbus communication protocol. This Altivar Machine ATV12 is designed for simple applications, in industry, commercial machines and HVAC machines such as conveyors, pumps, extractors, access barriers and treadmills. It conforms to IEC, UL and other international standards. SoMove software compatibility enables saving and transfering of configurations to spare drive, reducing maintenance downtime. It features an optimized application of power and torque for ventilation and pumping applications, this allows up to 30% energy savings. The ATV12 range meets basic machine requirements united with simplicity.

This Altivar Process ATV900 variable speed drive can feed 3-phase synchronous and asynchronous power motors. It is suitable for motors with power rating up to 37kW/50hp for applications requiring slight overload (up to 120%). It is suitable for motors with power rating up to 30kW/40hp for applications requiring significant overload (up to 150%). It works at a rated supply voltage from 380V to 480V AC. This variable speed / frequency drive (VSD / VFD) is specifically designed for industrial processes. In the following market segments, oil and gas, mining, minerals and metals, food and beverage water and wastewater. It offers high motor performance on any motor and total control of any kind of coupling in master/slave applications. Network services help ensure operation continuity even in case of connection breakdown. Web server and data logging help reduce downtime through fast troubleshooting and preventive maintenance. Its advanced connectivity, including EtherNet/IP and Modbus TCP, allows deep integration into automation architectures. It is designed to be mounted in vertical position (+/- 10 °) on a wall.

The variable speed drive, model ATV900, is designed to operate with 3-phase motors, accommodating both synchronous and asynchronous types. It is capable of handling motors with a power rating of up to 37kW for applications that require slight overload conditions, allowing for up to 120% overload. For applications needing significant overload, it supports motors rated up to 22kW at 150% overload. The drive operates within a supply voltage range of 500 to 690V and is specifically tailored for various industrial processes across sectors such as oil and gas, mining, food and beverage, as well as water and wastewater management.One of the notable features of this drive is its advanced connectivity options, including EtherNet/IP and Modbus TCP, which enable seamless integration into existing automation architectures. The built-in web server and data logging capabilities facilitate rapid troubleshooting and preventive maintenance, significantly reducing downtime. Furthermore, it provides comprehensive motor performance management and allows for total control of couplings in master/slave configurations.With a total weight of 53 kg and dimensions of 630 mm in height, 331 mm in width, and 297 mm in depth, this device is designed for wall mounting. It also includes various safety functions such as safe torque off and supports a range of input/output configurations suitable for complex industrial applications.

The Altistart 22 is a versatile soft starter designed for feeding 3-phase asynchronous motors. It boasts a rating of 88A, a power range from 25HP to 75HP, and a voltage capacity from 230V to 575V AC. This device is ideal for simple and complex machinery such as centrifugal and piston pumps, fans, screw compressors, and material handling equipment. Its slim form factor enhances its adaptability, allowing it to be mounted in various machine frames.The Altistart 22 features an integrated bypass, which reduces noise and minimizes heat dissipation. This feature is particularly beneficial for complex machinery that requires quiet operation and efficient thermal management. Additionally, the soft starter's compatibility with SoMove software allows for easy configuration and setting transfer, facilitating quick spare installation.The Altistart 22 provides smooth starting for your machinery, reducing mechanical stresses and extending their service life. This not only ensures optimal performance but also contributes to cost savings by minimizing downtime and maintenance requirements.

The Schneider Electric Altivar Soft Starter ATS480 is designed for starting and stopping asynchronous motors in a wide range of applications, from 208V to 690V. It meets the requirements of heavy-duty operations with an operational rated current of 38A, catering to motors ranging from 9kW to 30kW based on mains voltage. This soft starter is equipped with advanced features such as torque control (TCS) for efficient acceleration and deceleration. It also includes dynamic braking and DC injection capabilities, making it ideal for stopping high inertia applications. The ATS480 can be connected in-line or inside the delta to reduce operational current. The embedded test routine simplifies commissioning within the delta. With dimensions of 160mm (width) x 203mm (depth) x 275mm (height) and a weight of 4,9kg, it is compact and lightweight. The Schneider Electric Altivar Soft Starter ATS480 is designed to address process, infrastructure, and industrial machine applications. It conforms to IEC/EN60947-4-1 and is certified under CE, cULus, UKCA, CCC, RCM, EAC, and Marine certifications such as DNV, ABS, BV, and CCS. This soft starter shares common display terminals, remote mounting kits, and communication modules with Altivar Drives. It is also compatible with ATS48, sharing the same footprint, fixing, torque control algorithm, I/O, menus, and more. The integration of Altivar Soft Starter ATS480 in EcoStruxure simplifies architecture selection, detailed design, and execution in automation and electrical systems. The Schneider Electric Altivar Soft Starter ATS480 is a Green Premium product that adheres to environmental considerations beyond current directives and regulations, compliant with RoHS and REACH.

The ATSU01 soft starter is capable of managing 3-phase asynchronous motors, supporting a power range of up to 15 kW at 400 V and 7.5 kW at 230 V. With a width of just 45 mm, this unit is compact and facilitates installation in various environments. The integrated bypass feature minimizes noise and reduces heat generation, contributing to operational efficiency. The device has an IP20 protection rating, ensuring it is suitable for simple applications such as pumps, conveyors, and small cranes. Compliance with standards including IEC/EN 60947-4-2 and certifications from UL, CSA, C-Tick, and CCC further enhance its credibility.Operating under a temperature range of -10°C to 40°C without derating, and up to 50°C with a current derating, the ATSU01 also withstands an operating altitude of up to 1000 m without performance loss. The unit offers adjustable starting and deceleration times between 1 to 10 seconds, allowing for tailored motor operation. Its weight is 0.49 kg, and it is designed for vertical mounting with a tolerance of +/- 10 degrees.For ease of connection, it features various screw clamp terminals suitable for different wire sizes, and it is compatible with TeSys U starter-controllers via the power connector VW3G4104. The ATSU01 is a valuable component for optimizing machinery operations and minimizing maintenance downtime.

The Schneider Electric Altivar Soft Starter ATS480 is a high-performance solution designed for starting and stopping asynchronous motors in demanding applications. It operates within a voltage range of 208V to 690V, providing an operational rated current of 62A. This allows it to handle motor loads from 15kW to 45kW, depending on the mains voltage. The ATS480 is designed with digitization and connectivity in mind, meeting cybersecurity standards to simplify project execution and maximize application availability. Its torque control (TCS) feature efficiently manages acceleration and deceleration, while its dynamic braking and DC injection capabilities effectively stop high-inertia applications. The ATS480 can be installed in-line or inside the delta to reduce operational current. Its embedded test routine simplifies commissioning within the delta. With dimensions of 190mm (width) x 247mm (depth) x 290mm (height) and a weight of 8.3kg, it is compact and lightweight. The ATS480 is suitable for use in process, infrastructure, and industrial machine applications. It conforms to IEC/EN60947-4-1 and is certified under various standards including CE, cULus, UKCA, CCC, RCM, EAC, Marine DNV, ABS, BV, and CCS. The ATS480 integrates seamlessly with the Schneider Electric Altivar Drive range, sharing common display terminals, remote mounting kits, and communication modules. It is also compatible with the ATS48, featuring the same footprint, fixing, torque control algorithm, I/O, and menus. The integration of the Altivar Soft Starter ATS480 in EcoStruxure simplifies architecture selection, detailed design, and execution in automation and electrical systems. It is a Green Premium product designed to meet environmental considerations beyond current directives and regulations, compliant with RoHS and REACH.

The Altistart 22 soft starter is capable of driving 3-phase asynchronous motors, either in a supply line or delta configuration. It supports a voltage range of 230V to 440V and is rated for a maximum power output of 250 kW (400V to 440V when connected in supply line) and up to 400 kW in delta connection. With a starter rating of 480A, it is suitable for applications involving centrifugal pumps, piston pumps, fans, and material handling equipment.This unit features a compact design, facilitating installation in various machine frames. An integrated bypass function minimizes noise and reduces heat dissipation. Compatibility with SoMove software allows for straightforward configuration management, ensuring rapid installation of replacement units. The soft starter enhances operational smoothness, mitigating mechanical stresses and prolonging equipment lifespan. The product complies with multiple standards including IEC 60947-4-2, and is certified by GOST, CSA, UL, C-tick, and CCC.Operationally, it can function within a temperature range of -10 to 40 °C without derating, and 40 to 60 °C with a 2.2% derating per °C. It also features a pollution degree rating of level 2 per IEC 60664-1 and is designed for environments with humidity levels of 0-95% without condensation. This soft starter is suitable for altitude conditions up to 3280.84 ft (1000 m) without derating, with additional derating applicable for higher altitudes.

Altivar Soft Starter ATS480 is intended to start and stop asynchronous motors supplied from 208V to 690V. It meets the requirements of the most demanding applications in normal and heavy duty. With an operational rated current of 210A in normal duty, it supplies motor from 55kW to 200kW according to mains voltage. Designed for digitization, connected, optimized to meet cybersecurity standard, it simplifies project execution and maximizes the availability of applications. Its torque control (TCS) masters acceleration and deceleration. It efficiently stops high inertia application thanks to the dynamic braking and DC injection. It could be connected in-line or inside the delta to reduce its operational current. The embedded test routine simplifies the commissioning inside the delta. Its dimensions are 320mm (width) x 277mm (depth) x 380mm (height) and it weighs 18,2kg. Altivar Soft Starter ATS480 is designed to address process, infrastructures and industrial machines. It conforms to IEC/EN60947-4-1. It is certified CE, cULus, UKCA, CCC, RCM, EAC, and Marine certified DNV, ABS, BV and CCS. Display terminals, remote mounting kit, communication modules are common with Altivar Drives. Line chokes, DNV kits are common with ATS48. ATS480 is compatible with ATS48, it has same footprint, fixing, torque control algorithm, I/O, menus… The integration of Altivar Soft Starter ATS480 in EcoStruxure drastically simplifies architecture selection, detailed design and execution in automation and electrical systems. It is a Green Premium product designed to take the environmental considerations beyond current directives and regulations, compliant with RoHS and REACH.

Altivar Soft Starter ATS480 is intended to start and stop asynchronous motors supplied from 208V to 690V. It meets the requirements of the most demanding applications in normal and heavy duty. With an operational rated current of 75A in normal duty, it supplies motor from 18,5kW to 55kW according to mains voltage. Designed for digitization, connected, optimized to meet cybersecurity standard, it simplifies project execution and maximizes the availability of applications. Its torque control (TCS) masters acceleration and deceleration. It efficiently stops high inertia application thanks to the dynamic braking and DC injection. It could be connected in-line or inside the delta to reduce its operational current. The embedded test routine simplifies the commissioning inside the delta. Its dimensions are 190mm (width) x 247mm (depth) x 290mm (height) and it weighs 8,3kg. Altivar Soft Starter ATS480 is designed to address process, infrastructures and industrial machines. It conforms to IEC/EN60947-4-1. It is certified CE, cULus, UKCA, CCC, RCM, EAC, and Marine certified DNV, ABS, BV and CCS. Display terminals, remote mounting kit, communication modules are common with Altivar Drives. Line chokes, DNV kits are common with ATS48. ATS480 is compatible with ATS48, it has same footprint, fixing, torque control algorithm, I/O, menus… The integration of Altivar Soft Starter ATS480 in EcoStruxure drastically simplifies architecture selection, detailed design and execution in automation and electrical systems. It is a Green Premium product designed to take the environmental considerations beyond current directives and regulations, compliant with RoHS and REACH.