Aparamenta de baja tensión

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 25A resistive load rating. Contactor is supplied with a low consumption 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 25A resistive load rating. Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The Schneider Electric TeSys D Capacitor Contactor is a robust solution designed for switching 3-phase capacitor banks with a maximum capacity of 30kVAR at 400V/50Hz. This compact (55mm width) device features a 230V AC coil operating at 50/60 Hz, ensuring seamless integration into various environments. With its 1NO+2NC instantaneous auxiliary contacts and front-mounted early make poles, the TeSys D Capacitor Contactor provides reliable and efficient switching. It also comes with pre-wired damping resistors for current limitation, ensuring safe operation at rates up to 240 cycles/hour in environments up to 60°C. The TeSys D Capacitor Contactor is compliant with multi standards (IEC, UL, CSA) and adheres to the shunt capacitors standard IEC 60831. It is a Green Premium product, complying with RoHS/REACh directives.

The TeSys D series of contactors are engineered to facilitate seamless integration within automated control systems. These versatile devices enable the creation of motor starters suitable for a wide range of applications, supporting both inductive and resistive loads. The product line encompasses 13 different ratings, accommodating inductive motors up to 150 full-load amps and resistive loads reaching up to 200 amps. This specific model is a 4-pole IEC contactor that can be easily mounted on a DIN rail or directly onto a control panel. It features four normally open power contacts rated for a 25A resistive load. The device incorporates a 110 VAC 50/60 Hz coil for actuation and includes a built-in single normally open auxiliary contact, certified to mirror standards. Load and auxiliary circuits are connected via screw clamp terminals. A comprehensive selection of accessories is available to address diverse application needs. The unit measures 3.35 inches in height, 1.77 inches in width, and 3.62 inches in depth, with a weight of 0.80 lbs. This contactor holds certifications from UL, CSA, IEC, CCC, EAC, and Marine standards and is compliant with RoHS/REACh directives, qualifying it as a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 20A resistive load rating. Contactor is supplied with a 120 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

Schneider Electric's TeSys Deca contactors are engineered for perfect integration into control systems. They can be used to create motor starters for a variety of applications. TeSys Deca contactors come in 13 contactor ratings, catering to inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This particular 4 pole IEC contactor is suitable for mounting on DIN rail or directly onto a panel. The contactor features four normally open power contacts with a 40A resistive load rating. It is equipped with a 220 VAC 50/60 Hz coil and comes standard with one normally open and one normally closed auxiliary contact. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. A comprehensive range of accessories ensures that the contactor can meet the needs of most applications. The contactor measures 3.58 inches in height, 1.77 inches in width, and 3.90 inches in depth, weighing 0.94 lbs. The contactor is certified to UL, CSA, IEC, CCC, EAC, and Marine standards. It also adheres to RoHS/REACh regulations, making it a Green Premium product.

The TeSys D contactor is an ideal solution for creating motor starters for various applications. It is available in 13 contactor ratings, making it suitable for a wide range of inductive motor applications and resistive loads. This particular model is a 4 pole IEC contactor that can be mounted on DIN rail or directly to a panel. The contactor features four normally open power contacts with a 40A resistive load rating. It comes with a 12VDC coil and a transient suppressor module, ensuring reliable operation. The contactor also has one normally open and one normally closed auxiliary contact as standard. The contactor measures 3.58 inches in height, 1.77 inches in width, and 4.21 inches in depth. It weighs 0.94 lbs. The TeSys D contactor is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, and it meets the requirements of RoHS/REACh, making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 40A resistive load rating. Contactor is supplied with a 240 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.58 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys D contactor is an ideal choice for creating motor starters for various applications. It is available in 13 different ratings, catering to inductive motor loads up to 150 full-load amps and resistive loads up to 200 amps.This 4 pole IEC contactor can be mounted on DIN rail or directly onto a panel. It features four normally open power contacts with a 32A resistive load rating. The contactor is equipped with a 48VAC 50/60Hz coil and includes one normally open and one normally closed auxiliary contact as standard.The contactor measures 3.58 inches in height, 1.77 inches in width, and 3.90 inches in depth, weighing approximately 0.94 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, making it a reliable choice for various applications.The contactor also meets the requirements of RoHS/REACh, positioning it as a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 25A resistive load rating. Contactor is supplied with a 48 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys D contactors are designed for seamless integration into control systems. They can be used to create motor starters for a wide range of applications. These contactors are available in 13 different ratings, catering to inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This specific 4 pole IEC contactor can be mounted on DIN rail or directly onto a panel. The contactor features four normally open power contacts, each with a 20A resistive load rating. It comes equipped with a 240 VAC 50/60 Hz coil and includes one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections, and an extensive line of accessories allows for easy customization to meet the needs of various applications. This contactor measures 3.35 inches in height, 1.77 inches in width, and 3.62 inches in depth, weighing 0.80 lbs. The TeSys D contactors are certified to UL, CSA, IEC, CCC, EAC, and Marine standards, and they meet the requirements of RoHS/REACh, making them a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 40A resistive load rating. Contactor is supplied with a low consumption 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.58 inches tall, 1.77 inches wide and 4.21 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

Introducing the TeSys D Contact Relay, a versatile component designed for optimal integration into various control systems. This relay is suitable for creating motor starters for a wide range of applications. The TeSys D Contact Relay is available in 13 different contactor ratings, catering to inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This specific model is a 4 pole IEC contact relay. This relay can be mounted on DIN rail or directly onto a panel, providing flexibility in installation. It comes with four normally open power contacts, each rated for a 20A resistive load. The relay is powered by a 230VAC 50/60Hz coil. In addition to the power contacts, this relay also features one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified for enhanced reliability. The load and auxiliary connections are made using screw clamp terminals. A comprehensive line of accessories ensures that you can meet the requirements of most applications. With dimensions of 3.35 inches in height, 1.77 inches in width, and 3.62 inches in depth, this relay weighs 0.80 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, making it a reliable choice for various environments. Furthermore, the TeSys D Contact Relay meets the RoHS/REACh requirements, positioning it as a Green Premium product. This means it is not only efficient but also environmentally friendly.

The TeSys D contactor is an integral part of control systems, designed to cater to diverse application needs. It serves as a motor starter, compatible with a wide range of applications.Key Features:Available in 13 different ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 ampsMountable on DIN rail or directly onto a panelIncludes four normally open power contacts with a 40A resistive load ratingComes with a 110 VDC coil and transient suppressor moduleFeatures one normally open and one normally closed auxiliary contact as standardThe NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. The contactor's dimensions are 3.58 inches tall, 1.77 inches wide, and 4.21 inches deep, weighing 0.94 lbs.Certifications:ULCSAIECCCCEACMarine standardsThe contactor also adheres to RoHS/REACh, making it an environmentally friendly choice.

The TeSys D contactors are engineered for seamless integration into control systems, capable of creating motor starters for diverse applications. These contactors are available in 13 contactor ratings, catering to inductive motor loads up to 150 full-load amps and resistive loads up to 200 amps.This specific 4-pole IEC contactor can be mounted on DIN rail or directly on a panel. It features four normally open power contacts with a 20A resistive load rating. The contactor is equipped with a 110 VAC 50/60 Hz coil and comes standard with one normally open and one normally closed auxiliary contact. The NC contact is mirror certified.The contactor utilizes screw clamp terminals for load and auxiliary connections. A comprehensive range of accessories ensures compatibility with most applications. The contactor measures 3.35 inches in height, 1.77 inches in width, and 3.62 inches in depth, weighing 0.80 lbs.The contactor is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, and meets the requirements of RoHS/REACh, making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 20A resistive load rating. Contactor is supplied with a low consumption 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys D Capacitor Contactor is designed for efficient and reliable switching of 3-phase capacitor banks, with a capacity of up to 30 kVAR at 400 V/50 Hz. It features a 110V AC coil operating at 50/60 Hz, providing instantaneous auxiliary contacts (1NO+2NC) and early make poles for enhanced performance. This compact device, measuring just 55mm in width, is compatible with DIN-rail mounting or screw fixing. It offers high operating rates of up to 240 cycles per hour and operates reliably in environments up to 60°C. The TeSys D Capacitor Contactor is multi-standard certified (IEC, UL, CSA) and compliant with the shunt capacitors standard IEC 60831. It also adheres to Green Premium product standards, ensuring compliance with RoHS/REACh directives.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 25A resistive load rating. Contactor is supplied with a 48 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys D contactor is a versatile solution for creating motor starters in diverse applications. It boasts a 4-pole design with a resistive load rating of 60A, making it suitable for a wide range of applications. This contactor can be mounted on DIN rail or directly to a panel and features four normally open power contacts. The TeSys D contactor is available in multiple ratings, catering to inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. It comes with a 110 VAC 50/60 Hz coil and includes one normally open and one normally closed auxiliary contact as standard. The contactor is designed for easy installation, with screw clamp terminals for load and auxiliary connections. Its compact dimensions (4.80 inches tall, 2.76 inches wide, and 4.72 inches deep) make it suitable for various panel configurations. It weighs 2.40 lbs and is certified to UL, CSA, IEC, CCC, EAC, and Marine standards. The TeSys D contactor meets the requirements of RoHS/REACh, making it a Green Premium product. Its extensive line of accessories ensures that it can meet the needs of most applications.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 32A resistive load rating. Contactor is supplied with a 110 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.58 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.