Arrancadores suaves

The softstarter PSR16-600-11 has a rated maximum operational current of 16 A with an operating voltage span from 208...600 V AC. The rated control voltage is 24 V AC/DC. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

The softstarter PSE142-600-70 has a rated maximum operational current of 142 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

The Altistart 48 is a specialized soft starter designed for asynchronous motors, capable of handling a supply voltage range of 208V to 690V AC and a maximum current rating of 62A. With its torque control feature, it enables smooth and controlled starting and stopping, minimizing mechanical stress during operation. This functionality is crucial for applications in heavy-duty industries, particularly in centrifugal machines, pumps, fans, and conveyors.It supports motors with power ratings up to 50hp (for standard applications) and 45kW (at 690V). The device incorporates current output options and features a modular communication interface, including an RJ45 port for direct Modbus connection, and supports additional networks through separate modules.Designed for vertical mounting with a tolerance of +/- 10 degrees, its compact dimensions of 190mm x 290mm x 235mm and a weight of 8.3kg facilitate easy integration into various control panels. The unit adheres to the IEC/EN 60947-4-2 standard and is certified by multiple international standards, ensuring reliability in demanding environments.

The PSE18-600-70 Softstarter has a rated maximum operational current of 18 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general purpose softstarter. It’s a perfect balance between high starting capacity and cost efficiency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

The softstarter PSR30-600-11 has a rated maximum operational current of 30 A with an operating voltage span from 208...600 V AC. The rated control voltage is 24 V AC/DC. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

El Siemens ET200S DSS1E-X HF es un arrancador suave directo de altas funciones diseñado para un control fiable del motor en aplicaciones de automatización industrial. Con un rango de ajuste de 2,4 a 16,0 A, este dispositivo garantiza un arranque suave del motor y la protección mediante conmutación electrónica y protección electrónica. Es compatible con operaciones AC-3/TO 7.5kW/400V y es expandible para módulos de control de frenos, lo que lo hace versátil para diversas necesidades de control de motores.El ET200S DSS1E-X HF está equipado con módulos 2DI y señal ES de arrancador de motor desde el disyuntor, lo que permite una parametrización y un control precisos. Es compatible con DPV 1 y PROFIenergy en PN, lo que garantiza una integración perfecta en las redes industriales modernas y los sistemas de gestión de energía.Este arrancador suave es ideal para aplicaciones que requieren un control confiable del motor, como sistemas de transportadores, bombas y ventiladores. Su diseño robusto y sus características avanzadas lo convierten en una valiosa adición a cualquier configuración de automatización industrial.

The soft starter for asynchronous motors, designated as ATS48, provides torque-controlled soft starting and stopping capabilities utilizing six thyristors. This unit operates within a supply voltage range of 208V to 690V AC, supporting motors with power ratings up to 37 kW (at 690V) or 40 hp (at 575V) for standard applications. It integrates functions for deceleration and protection of both the machine and motor, facilitating communication with various control systems.With a weight of 4.9 kg and dimensions of 160 mm in width, 275 mm in height, and 190 mm in depth, it is engineered for use in demanding environments such as heavy-duty industries, pumps, fans, compressors, and conveyors commonly found in construction, food and beverage, and chemical sectors.The ATS48 complies with IEC/EN 60947-4-2 standards and is equipped with multiple certifications including CE, UL, and CSA. It features an RJ45 connector for direct Modbus bus connection and optional connectivity to Ethernet, Fipio, Profibus DP, and DeviceNet networks via additional modules. The mounting design allows for vertical installation with a tolerance of +/- 10 degrees, ensuring flexibility in various setups.This soft starter significantly reduces mechanical stress during operation and promotes energy efficiency by limiting energy losses and temperature rises, thus enhancing overall machine performance.

The softstarter PSR25-600-70 has a rated maximum operational current of 25 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

The softstarter PSTX72-600-70 has a rated maximum operational current of 72 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard.To interact with PSTX, it has a detachable full graphic display with IP66 and 4x outdoor rating. There are four ways to communicate with PSTX. It can be done by hardwire inputs Start/Stop/Reset of fault, and by three programmable digital inputs. Another popular option is the built-in Fieldbus communication Modbus RTU and incl optional ANYBUS modules with every major protocol such as for example Profinet, Profibus, Modbus TCP, Ethernet IP and others. Another way to communicate with PSTX is to use an external adaptor and a Fieldbus plug. PSTX is the complete alternative for any motor starting application. It’s suitable for medium to large-sized three-phase motors with nominal currents from 30...1250 A inline connection or 52...2160 A inside delta connection. Typical applications are, for example, pumps, fans, compressors, and conveyors.

The PSR16-600-70 Softstarter is designed to provide a smooth start and stop for small three-phase motors. With a rated maximum operational current of 16 A and an operating voltage range of 208...600 V AC, this softstarter ensures reliable performance in various applications.Key Features:Two-phase control soft start and stop through a voltage rampBuilt-in bypass for easy installation and energy savingRUN signal available from a relay output in NO (normally open state)Easy start/stop ramp and time setting with three potentiometers on the frontCompact design suitable for small three-phase motors with nominal currents from 3...105 ACan manage up to 100 starts per hourCommon applications include pumps, fans, compressors, and conveyors. The PSR16-600-70 Softstarter is often used in combination with a manual motor starter (MMS) from ABB, and mechanical connection kits are available. Fieldbus communication can be enabled by an external adaptor and a Fieldbus plug.

The PSR72-600-70 softstarter boasts a rated maximum operational current of 72 A, accommodating a wide operating voltage span from 208...600 V AC. It is equipped with a two-phase control soft start and stop through a voltage ramp, ensuring smooth motor operation. The softstarter features an integrated bypass for easy installation and energy savings. A RUN and TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time can be easily set using three potentiometers on the front panel. This softstarter is often used in combination with a manual motor starter (MMS) from ABB, and mechanical connection kits are available. An alternative option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications include pumps, fans, compressors, and conveyors.

The softstarter PSE170-600-70 has a rated maximum operational current of 170 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

The PSR12-600-70 softstarter is designed for applications requiring a rated maximum operational current of 12 A. It operates within a voltage span of 208 to 600 V AC, with a control voltage range of 100 to 240 V AC at 50/60 Hz. The PSR softstarter features a two-phase control soft start and stop through a voltage ramp. It includes built-in bypass for easy installation and energy saving. The device also provides a RUN signal from a relay output in the normally open state. The start/stop ramp and time can be easily set using three potentiometers on the front of the unit. This softstarter is often used in combination with a manual motor starter (MMS) from ABB, and mechanical connection kits are available for this purpose. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range represents our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3 to 105 A and can manage up to 100 starts per hour. Common applications include pumps, fans, compressors, and conveyors.

The ABB PSR SSTR is a compact range of softstarters that offer simple yet effective starting solutions. These devices are designed to perform well in applications where multiple starts are required per hour, making them ideal for installations where space is limited. Key Benefits: Compact and space-saving design Capable of handling many starts per hour Energy-efficient with built-in bypass for reduced energy loss at full speed Main Features: Rated operational current: 3 to 105 A Operational voltage: 208–600 V AC Control supply voltage: 24 V AC/DC or 100–240 V AC

The PSR45-600-70 Softstarter offers a rated maximum operational current of 45 A, with an operating voltage span from 208 V to 600 V AC. The control voltage is set between 100 V and 240 V AC at 50/60 Hz. This device features a two-phase control soft start and stop through a voltage ramp, ensuring smooth motor operation.The PSR45-600-70 Softstarter comes with built-in bypass for easy installation and energy saving. It also provides a RUN and a TOR signal from a relay output in NO (normally open state). The start/stop ramp and time can be easily set using three potentiometers on the front.This softstarter is often used in combination with a manual motor starter (MMS) from ABB, and mechanical connection kits are available. Alternatively, Fieldbus communication can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values, suitable for small three-phase motors with nominal currents from 3 to 105 A and capable of managing up to 100 starts per hour.Common applications include pumps, fans, compressors, and conveyors. The PSR45-600-70 Softstarter is a reliable choice for industrial automation systems requiring smooth motor operation and energy efficiency.

The ABB PSR25-600-11 Softstarter is designed for a rated maximum operational current of 25 A with an operating voltage range from 208 to 600 V AC. It features a two-phase control soft start and stop through a voltage ramp, along with built-in bypass for easy installation and energy savings. The device also includes a relay output in NO (normally open state) for RUN and TOR signals. The start/stop ramp and time can be easily set using three potentiometers on the front of the unit. The ABB PSR Softstarter is often used in combination with a manual motor starter (MMS), and mechanical connection kits are available for this purpose. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values, suitable for small three-phase motors with nominal currents from 3 to 105 A and capable of managing up to 100 starts per hour. Common applications for the ABB PSR Softstarter include pumps, fans, compressors, and conveyors.

The PSR9-600-70 softstarter boasts a maximum operational current rating of 9 A, with a voltage range from 208 V to 600 V AC. It is designed for a control voltage between 100 and 240 V AC at 50/60 Hz. The device features a two-phase control soft start and stop through a voltage ramp. It also includes built-in bypass for easy installation and energy savings. A RUN signal is available from a relay output in NO (normally open state).The start/stop ramp and time can be easily set using three potentiometers on the front of the device. This softstarter is often used in combination with a manual motor starter (MMS) from ABB, for which mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values.These softstarters are suitable for small three-phase motors with nominal currents from 3 to 105 A and can handle up to 100 starts per hour. Common applications include pumps, fans, compressors, and conveyors.

The softstarter PSR60-600-70 has a rated maximum operational current of 60 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

The PSR6-600-70 is a space-saving softstarter designed for reliable motor control in standard industrial applications. With a maximum operational current of 6 A and a wide supply voltage range from 208 to 600 V AC, it supports a rated control voltage between 100 and 240 V AC at 50/60 Hz.Utilizing two-phase control, the PSR6-600-70 provides smooth motor starting and stopping via an adjustable voltage ramp. The integrated bypass contactor reduces heat dissipation and wiring complexity, contributing to efficient energy usage and simplified installation.The unit features a relay output that offers a RUN signal in a normally open (NO) state. Users can easily configure the start and stop ramp times using three front-facing potentiometers.Designed to pair seamlessly with ABB manual motor starters (MMS), the PSR softstarter also supports Fieldbus integration through an optional external adapter and plug.The PSR series represents ABB’s most compact line of softstarters, offering essential functionality for small motors ranging from 3 to 105 A. These softstarters handle up to 100 starts per hour, making them ideal for frequent-start applications such as pumps, fans, compressors, and conveyor systems.

The softstarter PSE105-600-70 is designed for a rated maximum operational current of 105 A, with an operating voltage range spanning from 208 to 600 V AC. It features a two-phase control system that allows for a soft start and stop through a voltage or torque ramp. The device includes built-in bypass for easy installation and energy savings. It also provides a relay output with RUN, TOR, and Event signals in the NO state. The PSE105-600-70 offers functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. The device is equipped with an illuminated display that uses symbols for language neutrality. As an option, you can add an identical external keypad rated at IP66. Communication with the PSE105-600-70 can be achieved through hardwire inputs Start/Stop or by Reset of fault. It also supports built-in fieldbus communication Modbus RTU and can use an external adaptor and a Fieldbus plug. The softstarter is a versatile solution suitable for small to medium-sized three-phase motors with nominal currents from 18 to 370 A. Common applications include pumps, fans, compressors, and conveyors.