Herramientas y accesorios

The CRIMPFOX-M SET comprises crimping pliers and multiple dies tailored for a variety of applications. It features dies compatible with insulated cable lugs ranging from 0.5 to 2.5 mm² (1212074), non-insulated conduit lugs from 0.5 to 6 mm² (1212079), and ferrules spanning 0.25 to 10 mm² (1212080) as well as 16/25 mm² (1212081).This toolset is manufactured in Sweden and designed for universal compression, ensuring compatibility across a wide range of electrical components. The dimensions of the tool are 234 mm in length, 64 mm in width, and 31 mm in height, providing a compact profile for ease of handling. The total weight, including packaging, is approximately 851.35 g, while the weight without packaging is 843.3 g.For regulatory compliance, further information regarding California Proposition 65 can be consulted in the manufacturer's declaration available under 'Downloads'.

The Surge Protection Device DT-LAN-CAT.6+ is designed to provide surge protection in accordance with Class EA (CAT6A) standards. This device facilitates high-speed data transmission for Gigabit Ethernet, supporting rates up to 10 Gbps, and is compatible with various network types including token ring, FDDI/CDDI, ISDN, and DS1.It features an RJ45 attachment plug that is equipped with a separate grounding cable and a ground connection snap-on foot, suitable for mounting on NS 35 DIN rails. This device is optimized for Power over Ethernet (PoE++) and 4PPoE applications, functioning effectively in both 'Mode A' and 'Mode B'. The operational parameters include a maximum continuous voltage of ≤ 3.3 V DC and a rated current of ≤ 1.5 A at 25 °C.Furthermore, the surge protection device exhibits a total discharge current capacity of up to 10 kA and ensures rapid response times, with tA values of ≤ 1 ns for line-line and ≤ 100 ns for line-earth configurations. The device operates within a wide ambient temperature range of -40 °C to 70 °C and offers an IP20 protection degree, making it suitable for various industrial environments. The designation code for this product is DT-LAN-CAT.6+.

The FMC 0,5/ 3-ST-2,54 C2 is a printed-circuit board connector that accommodates a nominal cross-section of 0.5 mm². It supports a nominal current of 6 A and operates at a rated voltage of 160 V, making it suitable for various applications. The connector is designed with gold contact surfaces to enhance conductivity and reduce contact resistance, which is measured at 2.7 mΩ.This connector features a push-in spring connection method and is configured for a conductor/PCB connection direction of 0°. It has three potential connections arranged in a single row, with a pitch of 2.54 mm. The connector system is part of the COMBICON FMC 0,5 range, which allows for compatibility with MC(V) 0,5/...-G-2,54...C2 headers.Constructed from LCP insulating material, the connector is compliant with WEEE/RoHS directives and is free of whiskers, following the IEC 60068-2-82/JEDEC JESD 201 standards. The connector's packaging consists of cardboard, and it is available in a packing unit of 200 pieces. Additional features include a locking mechanism that is absent for ease of use and no mounting requirements, allowing for straightforward integration into various electronic systems.

The SIMATIC WinCC Professional 4096 PowerTags V15 serves as advanced engineering software tailored for the TIA Portal environment. This software package includes documentation on DVD and a license key provided via USB stick. It supports six languages: German, English, Italian, French, Spanish, and Chinese.Designed to operate on various Windows platforms, including Windows 7 (64-bit) and Windows 10 (64-bit), as well as Windows Server 2012 R2/2016 (64-bit), it is particularly suited for configuring SIMATIC Panels. The software encompasses functionalities such as alarm management and allows programming interface support using Visual Basic, ensuring robust project development capabilities.With a minimum processor pulse frequency requirement of 2 GHz and 8000 MB of main storage, the system is engineered to handle extensive configuration tasks effectively. It facilitates user group password protection and supports a variety of project planning interface languages, enhancing flexibility in project execution.This version, designated as V15.1, is part of the WinCC Professional product family and includes features aimed at improving user interaction and project management within automated systems.

TeSys F set of replacement contacts, for TeSys F 3-pole contactors LC1F500, CR1F500. Three contacts, one per pole. Each contact is composed of 2 fixed parts, 1 mobile part, deflectors, backplate and fixation screws. A pronounced wear of the tips of the contacts will require the contacts replacement. Green Premium compliant (RoHS/REACh).

The C-SAT-BOX is engineered for effective surge protection in antenna distribution systems utilized in satellite applications. It accommodates signals from both satellite systems and terrestrial antennas through five dedicated channels, utilizing F connectors for input and output.This device is constructed with a die-cast zinc housing, offering IP40 protection, and is designed for surface mounting. It operates within a nominal voltage of 14 V DC and features a maximum continuous operating voltage of 20 V DC.Performance specifications include a maximum pulse discharge current of 2.5 kA and a total discharge current capability of 10 kA, ensuring robust protection against surges. The device maintains a response time of less than 1 ns and an input attenuation of less than 1 dB across a frequency range of 47 MHz to 2.5 GHz, ensuring signal integrity is preserved.With a pollution degree of 2 and an overvoltage category of II, the C-SAT-BOX is suitable for various operational environments, capable of functioning in ambient temperatures ranging from -25 °C to 55 °C, and can be stored or transported in conditions between -40 °C and 80 °C. The device is compliant with EN 50083-2 standards, classified as CLASS-A, making it a reliable choice for satellite communication systems.

The fixing base is intended for use with modular tower lights, specifically designed for horizontal support installations. Constructed from lightweight plastic, this black plate facilitates quick and straightforward assembly for beacons and indicator banks with a diameter of 70mm.It is part of the Harmony XVB range and functions as a fixing plate, ensuring compatibility with models such as XVBZ14. With a net weight of just 0.05 kg, it is easy to handle and install. This accessory falls under the category of mounting and fixing accessories, making it suitable for various applications where reliable mounting solutions are required.

The Application Tool is designed specifically for the HWPP25 and HWPA6V025, enabling efficient bundling of cables. With a nominal diameter of 1" (25.0 mm), this tool allows for smooth and secure insertion of cables into the cover, enhancing the user experience.This tool's innovative design permits individual cables to be easily separated and branched off through the cover apertures, streamlining the overall process. Each box of Helawrap includes one applicator tool, with additional units available for separate purchase. Constructed from Polyamide 6.6 (PA66), the tool is distinguished by its blue color (BU) and is manufactured in Great Britain. The GTIN for this product is 5022660178344.

The Amp-Trap ATQ series features a time-delay midget fuse with a voltage rating of 500VAC and an ampere rating of 25A. This fuse is specifically designed for supplemental circuit protection, particularly in systems where the available short circuit current does not exceed 10,000A. It is important to note that this fuse is not intended for branch circuit protection.Constructed with a body made of GMG insulating material, it utilizes tin-plated copper for the connection terminals. The mounting method is via a clip, ensuring secure installation. The fuse's dimensions include a length of 1.5 inches and a diameter of 0.41 inches, with a weight of 0.012 lb, making it compact and lightweight.Furthermore, this fuse complies with ROHS standards, ensuring environmental safety. It is packaged in quantities of 10, with the overall packaging dimensions measuring 1.62 inches in length, 0.88 inches in width, and 2.12 inches in height, weighing a total of 0.13 lb.

The NH fuse-link system, recognized as a plug-in fuse solution, comprises a fuse-base that may include terminal covers and phase barriers, alongside a fuse-link equipped with blade contacts and a fuse-link replacement device (LV HRC fuse puller). Due to the design of this system, it necessitates handling by qualified professionals to ensure the correct interchangeability of rated currents.Type gG NH fuse-links are designed to offer comprehensive protection against surges, effectively interrupting currents from the minimum fusing current up to their specified breaking capacity. This capability allows them to function independently as protective devices. Additionally, these fuse-links safeguard electrical equipment and industrial systems from the electrodynamic impacts of substantial short-circuit currents.With an ampere range extending from 2 to 800 A, these fuse-links comply with standards including DIN 57636 Part 201, VDE 0636 Part 201, and IEC 60269-1 and -2. They consist of copper and silver-plated contacts and a ceramic body material, making them suitable for general-purpose cable and line protection applications. The sizes available conform to standard sizes 000, 00, 0, 1, 2, and 3, and they are CE compliant. For lead-free specifications and ROHS compliance, consultation with Technical Services is recommended.

The SACC-DSIV-FS-8CON-L90 SCO is an 8-position flush-type female connector, specifically tailored for sensor and actuator applications. This connector employs M12 SPEEDCON A-coding and is designed for rear mounting with a screw mechanism, utilizing an M12 thread.Manufactured in Germany, this device connector features anti-rotation protection and a straight solder connection method. Its housing is composed of GD-Zn with a nickel surface treatment, while the insulating body is made from PA 6.6. The connector's contacts are crafted from copper alloy with a gold surface finish, ensuring low contact resistance of ≤ 3 mΩ and high insulation resistance of ≥ 100 MΩ.Rated for a nominal voltage of 60 V and a nominal current of 4 A, the connector supports THR and wave soldering connection methods. It has an angled cable outlet and a locking mechanism based on the SPEEDCON design, providing a secure and reliable connection. The device is also IP67 rated, ensuring protection against dust and water ingress, and is operable within a temperature range of -25 °C to 85 °C.

Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 10 mm², unlockable pressure lock, lateral entry

The M23 device connector, designated as CA-12P2S12AD00, is designed for front mounting applications. It features a total of 12 positions and employs a pin contact type with solder connections. This connector supports a counter direction of rotation and is specifically designed for both standard and SPEEDCON interlock systems. Constructed with a shielded design, it ensures reliable performance in various environments. The connector can withstand up to 100 insertion/withdrawal cycles and is rated for a maximum current of 8 A at a voltage of 48 V AC. The degree of protection for this device is rated at IP67 when plugged in, ensuring its suitability for demanding conditions. The housing material is GD-Zn, while the rotating parts are made from CuZn, providing durability and reliability. The connection profile is M23 with a flange housing design, allowing for easy installation on a square flange with four mounting holes of Ø 3.2 mm. Additionally, this product complies with RoHS II standards without exemption 6c, ensuring it contains less than 0.1% lead.

This set of two quick-fixing cross rails serves as mounting accessories suitable for various PanelSeT electrical enclosures, including SFN, SF, SM, and SFX models. Constructed from galvanized steel, these cross rails measure nominally 1000 mm in height, with a useful height of 910 mm, and a width of 90 mm. Each rail features three horizontal rows, with perforations every 25 mm, accommodating fixing elements through holes of 5.2 mm in diameter and dimensions of 11x13 mm.These components are adaptable and can be mounted on the enclosure's structure using either caged nuts or self-tapping screws, providing an adjustable pitch of 25 mm. The maximum load capacity is rated at 70 kg, making them versatile for multi-purpose applications. This product is categorized under the mounting accessory type and is compliant with various environmental regulations, ensuring a sustainable choice.

The safety light curtain, identified as type 4, is part of the XUSL series, specifically designed for hand protection in environments with hazardous machines. It features a height protection capability of 760 mm and utilizes 38 beams for detection. The device supports two safety outputs OSSD with a solid-state PNP configuration, capable of handling arc suppression with a current limit of 0.4 A.This light curtain operates with an infrared LED emission technology at a wavelength of 950 nm, providing an effective aperture angle of 25° at a distance of 3 m. The nominal sensing distance varies between 0 to 10 m and 3 to 20 m depending on the wiring configuration. The unit is constructed with an aluminum casing in red, a polycarbonate front panel, and polypropylene end caps, measuring 29.4 mm in width, 31 mm in depth, and 813 mm in height, with a total weight of 1.5 kg.It is rated for a supply voltage of 24 V DC and an operational current of 2 A. The unit is equipped with a 5-pin M12 male connector for the transmitter and an 8-pin M12 male connector for the receiver. Additionally, the product operates under IP65 and IP67 ratings, ensuring durability in various environmental conditions, with an operational temperature range of -20 to 55 °C.This safety light curtain includes an adjustable mounting bracket, a user guide, and a certificate of conformity on CD-ROM. Proper installation requires alignment of the transmitter and receiver for optimal functionality. This device serves as an optical protection system, effectively stopping moving parts when any of the light beams are interrupted, thus enhancing operator safety in potentially dangerous zones.

The complete beacon serves as a vital lighting accessory for tower lights, utilizing a flash discharge tube to produce a strobe light. This feature enables clear status indication for machinery in various applications including automotive, machine tools, material handling, packaging, assembly stations, and conveyors.With an IP65 rating on the fixing base and IP66 on the base unit, this beacon is designed to withstand harsh conditions, making it suitable for environments that are impact, dust, water, and vibration resistant. Its construction includes a base unit made of glass reinforced polyamide and an illuminated unit crafted from polycarbonate, ensuring durability.Operating at a nominal voltage of 120 V AC and a flash energy of 10 joules, it maintains a flashing frequency of 1 Hz with a current consumption of less than 290 mA AC. The beacon measures 70 mm in diameter and has a total height of 232 mm. The device complies with the standards EN/IEC 60947-5-1 and has received several certifications, including CCC, EAC, and UL 508, ensuring reliability and safety in operation.

This Industrial Control Transformer, designated as Type TF, features a power rating of 350VA and operates on a 1 phase system. The transformer is equipped with a primary voltage of 240 x 480V and a secondary voltage of 120V, suitable for frequencies of 50/60Hz. Designed with factory-installed overcurrent protection, it includes two primary and one secondary fuse blocks, providing a compact configuration that meets the overcurrent requirements of panel builders and machinery OEMs. The fuse blocks are pre-wired and mounted on the transformer, maintaining the same footprint as Type T and Type EO units, thereby optimizing space. This transformer complies with UL, CE, and CSA standards, ensuring reliable performance in various applications. It has dimensions of 5.13 in (H), 4.5 in (W), and 5.11 in (D) and features screw clamp terminal connections. The copper winding material enhances its electrical efficiency. Moreover, the product is compatible with FSC2, indicating its suitability for specific applications. The insulation temperature is rated at 130 °C, and the temperature rise is limited to 80 °C.

This plug is designed for nominal voltages up to 500 V and supports a maximum current of 24 A. It incorporates a spring-cage connection method, which simplifies wiring and ensures secure connections. The rated cross section is 2.5 mm², while it accommodates conductor cross sections ranging from 0.08 mm² to 4 mm². The plug is manufactured in blue (RAL 5015) and conforms to the IEC 61984 standard, allowing for connection and disconnection without load or voltage under intended use.The dimensions of the plug include a width of 5.2 mm, height of 20 mm, and depth of 39 mm. It features a degree of pollution rating of 3 and operates within an ambient temperature range of -60 °C to 70 °C. Additionally, the plug meets various fire protection requirements for rail vehicles as specified in DIN EN 45545-2 and has a flammability rating of V0 according to UL 94.The SPB 2,5/ 1-M BU designation code indicates its specific configuration, including the internal cylindrical gauge of A3 and a maximum load current of 24 A when utilizing a 4 mm² conductor cross section. It is suitable for diverse applications, including those requiring reliable performance in harsh environmental conditions.

The PVC Drain Cover is constructed from flexible, chemical-resistant vinyl, offering effective sealing capabilities to prevent spills from contaminating drainage systems. With dimensions of 36 inches in width and length, this drain cover is engineered to meet compliance with various industry regulations, including EPA 40 CFR 112.7(c)(1)(vii) and OSHA standards.This product, identified by the trade name SlikStopper, features a tear-resistant design, ensuring durability in challenging conditions. The bright yellow color enhances visibility, making it suitable for various industrial applications. Additionally, it is compliant with EU RoHS regulations, affirming its safety and environmental considerations.

This terminal block is designed for printed circuit board applications with a pitch of 3.5 mm and accommodates 21 poles arranged at a 180° angle. The solder pin length measures 1.5 mm, making it suitable for various PCB soldering tasks. The component utilizes a PUSH IN wire connection method, with a clamping range capable of handling conductors up to 1.5 mm².Constructed with LCP GF insulating material and featuring a black color, the terminal block adheres to stringent standards including IEC 60664-1 and IEC 61984. The rated voltage is specified at 300 V, and the rated current varies between 10 A and 12 A depending on the application group. Furthermore, it is compliant with several approvals including CSA, cURus, and VDE, ensuring its reliability across diverse industrial applications.With dimensions of 74.2 mm in width, 15.5 mm in height, and 7.8 mm in depth, this terminal block has a net weight of 15.571 g. It supports a wide operating temperature range from -50 °C to 120 °C, enabling its use in various environments. The product is packaged in tubes, facilitating organized handling and storage.