Motores eléctricos

TeSys island direct SIL starter, 3 poles, 80A/690V. Connected to a TPRBC bus coupler it controls, protects and monitors loads up to 80A and motors up to 37kW@400V / 40hp@480V. In association with a TPRSM001 module and an external safety device, it can be used for safety related systems conforming to IEC 61508. It provides motor protection functions including thermal overload (setting 4-80A, tripping class 5-30), phase loss, phase unbalance and reversal, long start (stall), locked rotor (jam), rapid cycle lockout, ground current detection. Monitoring of the load includes max/average voltages and currents, number of switching cycles, number of faults, active and reactive power/energy when associated to a TPRVM001 voltage module. Mounting on DIN rail together with the other modules of the TeSys island configuration. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

Introducing the SFTY REV STARTER, a robust and reliable solution designed for fail-safe reversing applications. This starter is equipped with a 3RM1 model, offering a voltage rating of 500 V. It provides an output power range of 0.09 - 0.75 kW, ensuring efficient performance across various applications. The SFTY REV STARTER is designed to handle currents ranging from 0.4 to 2 A with a DC voltage of 24 V. It features screw terminals for easy and secure connection, making it an ideal choice for industrial settings where reliability and safety are paramount.

TeSys U standard control unit to be inserted in power bases LUB32, LUB38 to form a TeSys U starter controller, for 3-phase motor applications up to 15kW@400V. It provides full protection to motors with a rated current Ir 8-32A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). To be used with a 24V DC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

This soft starter can feed 3-phase asynchronous motors in supply line or delta connection. It has a rating of 75A and 230V to 440V, a rated power up to 37kW (400V to 440V in supply line) and up to 75kW (440V in motor delta connection). It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

SIRIUS motor starter m200d as-i communication as-interface direct on-line starter, basic electr. switching 3 400V AC/4KW 1,5a...9,00a electr. overload protection thermistor thermoclick / ptc with brake contact 230/400V AC 2di as-i + 2di / 1do on device han q4/2 - han q8/0 with operator terminal and key-operated switch

The Schneider Electric TeSys LRD thermal overload relay is designed for use with TeSys D contactors. It offers protection for motors up to 55kW at 400V, thanks to its thermal range of 95-120A and tripping class of 10A. The relay also includes phase unbalance protection. This compact and lightweight relay is available worldwide and is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). It features manual test & reset buttons, automatic reset, trip auxiliary contact and flag indicator. The relay can be directly mounted on the bottom terminals of a Tesys contactor LC1D115 and D150 to form a compact starter. It is temperature compensated for accurate protection and can be completed with terminal blocks for separate mounting (LAD7B, LAD96) and remote control devices (LAD703, LA7D03).

The SIRIUS M200D motor starter is a robust solution for industrial applications, offering AS-Interface direct online starter communication. This standard mechanical switching device is designed to handle AC power up to 3 phases and 5.5 kW at 400 V, with a current range of 1.5 A to 12.00 A. Equipped with electronic overload protection, this motor starter ensures safe operation by monitoring the current draw and shutting down if it exceeds predefined limits. The thermistor incorporated in the design provides thermal protection, utilizing THERMOCLICK / PTC technology without brake contact. The SIRIUS M200D motor starter supports 4 DI (Digital Input) and 1 DO (Digital Output) AS-i communication. It is compatible with Han Q4/2 -H and Han Q8/0 connectors, making it a versatile choice for various industrial automation systems.

The ABB PSTX37-600-70 is a versatile softstarter designed for medium to large three-phase motors, offering a rated maximum operational current of 37A and an operating voltage span from 208V to 600V AC. The rated control voltage is between 100V to 250V AC at 50/60 Hz. The PSTX features a three-phase control soft start and stop through a voltage or torque ramp, with built-in bypass for easy installation and energy saving. It offers relay outputs in NO (normally open state) for RUN, TOR and Event signals. The PSTX also has functions such as current limit, kickstart, analog output, EOL, motor heating, and pump cleaning. The PSTX comes with standard features like jog, braking, stand-still brake, diagnostics, sequence start, and emergency/fire pump mode. It also has a detachable full graphic display with IP66 and 4x outdoor rating for easy interaction. Communication with the PSTX can be done through hardwire inputs Start/Stop/Reset of fault, programmable digital inputs, built-in Fieldbus communication Modbus RTU, optional ANYBUS modules, or an external adaptor and a Fieldbus plug. The PSTX is suitable for medium to large-sized three-phase motors with nominal currents from 30A to 1250A inline connection or 52A to 2160A inside delta connection.

The Lexium range offers motion servo drives and servo motors, including the 8-pole AC servo motor. This product features a low moment of inertia with a maximum mechanical speed of 6000RPM and an IP54 parallel keyed shaft without holding brake. It is equipped with a single-turn (131072 points/turn) SinCos Hiperface® high-resolution absolute encoder, providing an angular shaft position precise to less than ±1.3 arc minutes. The BSH servo motor satisfies requirements for precision and high dynamic performance due to its low rotor inertia. The servo motor is compact and offers a high power density. It is a synchronous servo motor with a supply voltage of 480V, a continuous stall current of 6.2A, and a maximum continuous power of 3.64W. The shaft dimensions are 24mm (Diameter) x 50mm (Length). It is furnished with rotatable right-angled connectors for electrical connection. The product is an IP50 rated servo motor with dimensions of 276.5mm (Length) x 100mm (Width), centring collar dimensions of 3.5mm (Depth) x 95mm (Diameter) with a 115mm circle diameter of the mounting hole. It weighs 9.5kg. This servo motor is compatible with Lexium 32, Lexium 05, and Lexium 15 servo drives. It supports international standard 100mm flange mount with a natural convection cooling system. The encoder gives the absolute position of the motor so that flows can be synchronized and sends data from the servo motor to the servo drive, which provides automatic identification of the motor when the servo drive starts. The BSH servo motor features a 3-phase stator and neodymium iron boron (NdFeB) magnets. The casing is coated with RAL 9005 opaque black paint protective coating. It has a 4-point axial mounting flange. Cables and connectors are to be ordered separately.

The softstarter PSR12-600-11 has a rated maximum operational current of 12 A with an operating voltage span from 208...600 V AC. The rated control voltage is 24 V AC/DC. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

This soft starter can feed 3-phase asynchronous motors in supply line or delta connection. It has a rating of 62A and 230V to 440V, a rated power up to 30kW (400V to 440V in supply line) and up to 55kW (400V to 440V in motor delta connection). It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

TeSys U advanced power base, 3 poles (3NO), 12A/690V, to be completed with a control unit LUC to form a TeSys U starter controller, for 3-phase motor applications up to 5.5kW@400V. Base composed of power contacts, control coil, rotary handle, with a modular design for additional modules to form a "all in one" starter controller with basic or advanced protection and control functions. It is equipped with auxiliary signaling contacts (1NO+1NC), a control terminal block, and blanking shutters covering the empty cavities. It provides a high breaking capacity Icu 50kA@400V, start-stop control guaranteed for 3600 cycles/hour. Very compact (45mm width), DIN-rail mounting and screw fixing, with a padlockable rotary handle. Certified when used in conjunction with a LUC control unit (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

This product is part of the Lexium range by Schneider Electric, offering motion servo drives and servo motors. The 8-pole AC servo motor features a low moment of inertia with a maximum mechanical speed of 6000RPM and an IP54 parallel keyed shaft without holding brake. It is equipped with a single-turn (131072 points/turn) SinCos Hiperface® high-resolution absolute encoder, providing an angular shaft position precise to less than ±1.3 arc minutes. This BSH servo motor satisfies requirements for precision and high dynamic performance due to its low rotor inertia. The motor is compact and offers a high power density. It is a synchronous servo motor with a supply voltage of 480V, a continuous stall current of 3.5A, and a maximum continuous power of 1.6W. The shaft dimensions are 19mm (Diameter) x 40mm (Length). It is furnished with rotatable right-angled connectors for electrical connection. It is an IP50 rated product. Its dimensions are 168.5mm (Length) x 100mm (Width), centring collar dimensions are 3.5mm (Depth) x 95mm (Diameter) with 115mm circle diameter of the mounting hole. It weighs 4.2kg. This product is compatible with Lexium 32, Lexium 05 and Lexium 15 servo drives. It supports international standard 100mm flange mount with a natural convection cooling system. The encoder gives the absolute position of the motor so that flows can be synchronized and sends data from the servo motor to the servo drive, which provides automatic identification of the motor when the servo drive starts. The BSH servo motor has a 3-phase stator and neodymium iron boron (NdFeB) magnets. Casing with RAL 9005 opaque black paint protective coating. 4-point axial mounting flange. Cables and connectors to be ordered separately.

This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The brushless servo motor features a high moment of inertia with maximum mechanical speed of 5000RPM and IP65 parallel keyed shaft without holding brake. It is equipped with a 20bit single-turn absolute encoder, optimized in terms of speed of rotation (3000RPM). It is a second generation servo motors suitable for a wide variety of applications due to the different levels of motor inertia offered. It has a rated supply voltage of 220V, a continuous stall current of 1.11A and a continuous power of 200W. The shaft dimensions are 14mm (Diameter) x 30mm (Length). It is furnished with free lead for electrical connection. It is an IP50 (IM V3) and IP65 (IM B5, IM V1) rated product. Its dimensions are 104mm (Length) x 60mm (Width), centring collar dimensions are 5.5mm (Depth) x 50mm (Diameter) with 70mm circle diameter of the mounting hole. It weighs 1.02kg. This product is compatible with Lexium 28 and Lexium 26D servo drives. It supports Asian standard 60mm flange mount with a natural convection cooling system. Lexium 28 and Lexium BCH2, the optimized servo bundle for all motion control solutions are cost effective, energy efficient and embedded safety. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.

The SIRIUS Soft Starter, model S2, is an advanced solution for motor control in various industrial settings. This device boasts a robust 45A rating and can handle up to 22 kW at 400 V. It operates within a temperature range of 40°C, ensuring reliable performance even in demanding conditions. The soft starter is compatible with a wide voltage range from 200-480 V AC and supports both AC and DC power at 24 V. It features screw terminals for easy wiring, along with thermistor motor protection to safeguard against overheating.

TeSys U standard control unit to be inserted in power bases LUB12, LUB32, LUB38 to form a TeSys U starter controller, for 3-phase motor applications up to 1.5kW@400V. It provides full protection to motors with a rated current Ir 1.25-5A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). To be used with a 48V AC / 48-72V DC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

This Altistart 48 soft start/soft stop unit is a controller with 6 thyristors used for torque-controlled soft starting and stopping of three-phase asynchronous motors. It offers soft starting and deceleration functions along with machine and motor protection functions, as well as functions for communicating with control systems. It works at a rated supply voltage from 208V to 690V AC and up to 170A rating. Altistart 48 torque control enables starting without mechanical stress and smooth control of hydraulic transitions, with a single acceleration ramp making adjustments is quick and easy, whatever the load. It is suitable for motors with power rating up to 150hp (at 575V) / 160kW (at 690V) for standards applications and 125hp (at 575V) / 110kW (at 690V) for severe applications. It weighs 12.4kg and its dimensions are, 200mm wide, 340mm high, 265mm deep. It is designed for use in the most common applications for centrifugal machines, pumps, fans, compressors and conveyors, which are primarily to be found in the construction, food and beverage and chemical industries. It complies with IEC/EN 60947-4-2 standard and is certified CE, UL, CSA, DNV, C-Tick, GOST, CCC, NOM, SEPRO, and TCF. The Altistart 48 is connected directly to the Modbus bus via its RJ45 connector port, It can also be connected to Ethernet, Fipio, Profibus DP and DeviceNet networks via a module (bridge or gateway) to order separately. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. Altistart 48 delivers high performance with its Torque Control System (TCS) for controlled starting and deceleration, an easy integration in enclosures and control systems. This range provides also continual improvement of your machine operation by reducing mechanical or hydraulic stress and limiting energy loss and temperature rise, plus more.

The PSE72-600-70, a robust softstarter, boasts a rated maximum operational current of 72 A and operates within a voltage range of 208 to 600 V AC. It features a two-phase control with a soft start and stop through a voltage or torque ramp. The device is equipped with built-in bypass for easy installation, energy saving, and a relay output providing RUN, TOR, and Event signals in the NO state. The PSE72-600-70 offers functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. Its illuminated display uses symbols to become language neutral, enhancing its usability. As an option, you can add an identical external keypad with a rating of IP66. Communication with the PSE72-600-70 can be achieved through hardwire inputs Start/Stop or by Reset of fault. It also supports built-in fieldbus communication Modbus RTU and can be connected via an external adaptor and a Fieldbus plug. This softstarter is a perfect balance between high starting capacity and cost efficiency, making it suitable for small to medium-sized three-phase motors. Typical applications include pumps, fans, compressors, and conveyors. The PSE72-600-70 is a true general purpose softstarter, designed to cater to the needs of various industries while ensuring optimal performance and energy efficiency.

The PSTX142-600-70, a product from ABB, is a high-performance softstarter designed for medium to large-sized three-phase motors. It boasts a rated maximum operational current of 142A with an operating voltage range from 208V to 600V AC. The control voltage ranges between 100V and 250V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or torque ramp, with built-in bypass for easy installation and energy saving. It offers a RUN, TOR and Event signal from relay outputs in NO state. The PSTX also includes functions such as current limit, kickstart, analog output, EOL, motor heating, and pump cleaning. PSTX comes with standard features like jog, braking, stand-still brake, diagnostics, sequence start, and emergency/fire pump mode. It also has a detachable full graphic display with IP66 and 4x outdoor rating for easy interaction. Communication with PSTX can be done via hardwire inputs Start/Stop/Reset of fault, programmable digital inputs, Fieldbus communication Modbus RTU, and an external adaptor with a Fieldbus plug. The PSTX is suitable for medium to large-sized three-phase motors with nominal currents from 30A to 1250A inline connection or 52A to 2160A inside delta connection.

The Phoenix Contact ELR H5-IES-PT- 24DC/500AC-9 Hybrid Motor Starter is designed for reversing 3~ AC motors with a voltage rating of up to 500 V AC and an output current of 9 A. It features a 24 V DC control voltage, providing seamless integration into various automation systems.This hybrid motor starter offers adjustable overload shutdown and emergency stop functions, ensuring safe operation and compliance with SIL 3/PL e standards. The push-in connection system further enhances the ease of installation and maintenance, making it an ideal choice for industrial applications.