PLC

Axioline F, Analog output module, Analog outputs: 4, 0 V ... 5 V, -5 V ... 5 V, 0 V ... 10 V, -10 V ... 10 V, 0 mA ... 20 mA, 4 mA ... 20 mA, connection technology: 2-conductor, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors

TeSys K control relay, 4 contacts (4NO), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 24V DC control circuit with no inrush consumption, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -25/+50°C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium product (RoHS/REACh).

This Multi9 C60H-DC is a low voltage miniature circuit breaker (MCB) dedicated to direct current. It is a 2P circuit breaker with 2 protected poles, 4A rated current and C tripping curve. The rated short circuit breaking capacity goes up to 20kA at 220VDC conforming to EN/IEC 60947-2 standard and 20kA at 220VDC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 3000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 220VDC. The Ui rated insulation voltage is 500VDC. The Uimp rated impulse withstand voltage is 6kV. The product can be clipped on a DIN rail. Its width is 4 pitches of 9mm. Pollution degree is 3. The product colour is light grey (RAL7035). The dimensions are (W) 36mm x (H) 81mm x (D) 73mm. The weight is 0.128kg. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -25°C to 70°C. The storage temperature is -40°C to 85°C.

This product is part of the Lexium SD3 and motors an offer of 3-phase stepper drives and stepper motors. The 3-phase stepper motor drive with an integrated pulse/direction communication interface. High torque is available even at low speeds. It is a motor drive with a rated supply voltage of 100V to 120V, 200V to 230V, a motor phase current of 2.5A, a nominal power of 270W at 230V and maximum mechanical speed of motor drive is 3000RPM. It is provided with natural convection cooling method. It is an IP20 and IP40 rated product. Its dimensions are 72mm (Width) x 140mm (Depth) x 145mm (Height). It weighs 1.1kg. The Lexium SD3 with its excellent constant velocity characteristics is ideal for applications such as printing, paper, packaging, handling, labelling, textile industry, scanning, food and beverages. This product is certified by CUL, CE and UL. It meets EN/IEC 50178, EN/IEC 61800-3 environment 1, EN/IEC 61800-3 environment 1, EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. The SD3 is an universally applicable stepper motor drive. The package is ready for operation within a very short period of time. Connect the stepper motor to the drive, set the current and step resolution. Stepper drives and stepper motors for motion control.

3-way repeater power supply with plug-in connection technology. HART-transparent, input signal 0(4) mA ... 20 mA, output signal 0(4) mA ... 20 mA. The device can be used in both isolator and repeater power supply operation. push-in connection technology

SIMATIC ET 200SP Open Controller. CPU 1515SP PC2 F. 8 GB RAM. 30 GB CFast con Windows 10 IoT Enterprise 64 bits y controlador de software S7-1500 Failsafe CPU 1505SP F preinstalado. Interfaces: 1x ranura CFast. 1x ranura SD/MMC. 1x conexión para adaptador de bus ET 200SP PROFINET. 1x Ethernet 10/100/1000 Mbit/s. 2x USB 3.0; 2x USB 2.0. 1x puerto de visualización. documentación en memoria USB. restaurar USB

The Modicon TM5 Analog Input Module is a high-performance, safe IP20 modular I/O system that offers 6 inputs with 16-bit resolution. This module is designed for flexibility and scalability in automation solutions.It features a rated supply voltage of 24V DC and a current consumption of 2mA at 5V DC bus, 38mA at 24V DC input/output. The insulation between channel and bus is 500Vrms AC, with no insulation between channels.The module supports thermocouple inputs of J - 210°C to 1200°C, N - 270°C to 1300°C, K - 270°C to 1372°C, S - 50°C to 1768°C with internal supply. It is rated IP20 and weighs 0.025kg.This product meets the typical requirements of production and packaging machinery, as well as material handling and assembly systems. It is certified by GOST-R, C-Tick, cULus and CSA, and complies with IEC 61131-2, UL 508, CSA C22.2 No 213 and CSA C22.2 No 142 standards.The Modicon TM5 Analog Input Module is compatible with Modicon LMC058 motion controller and Modicon M258 logic controller. It can be installed by mounting on a 35mm DIN rail, providing a flexible and scalable configuration of remote or distributed IO islands by connection with Modicon and PacDrive 3 controllers.Designed for complex machines, this modular IO system offers a flexible and scalable solution for automation needs.

The CT-MBS.22S is a multifunctional electronic time relay from the CT-S timer range. It provides 10 timing functions with 10 time ranges, ranging from 0.05 seconds to 300 hours.This time relay operates on a rated control supply voltage of 24 - 48 V DC / 24 - 240 V AC and has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. The control input works with volt-free (floating) triggering.The CT-MBS.22S offers the possibility of connecting a remote potentiometer for fine adjustment of the time delay. The second of the c/o contacts can be selected as an instantaneous contact. A sealable transparent cover for protection against unauthorized changes is available as an accessory.The device features screw connection technology with double-chamber cage connection terminals.

The Siemens Key Switch is a robust solution for your automation needs. This key-operated switch boasts a round metal design with a shiny finish, adding an aesthetic touch to your industrial setup. It comes with two keys and offers three switch positions: I-O-II.The switch operates on a latching mechanism, ensuring reliable performance in demanding environments. The actuating angle is 2x45°, providing flexibility in installation.With a lock number of SSG10, this switch offers enhanced security and durability. It's designed to withstand rigorous use, making it an ideal choice for various industrial applications.

SIPLUS HMI TP1500 Comfort OD -30 ... +60 Grados C con recubrimiento conformado basado en 6AV2124-0QC13-0AX0. TP1500 Comfort Outdoor. Panel Comfort. Táctil. Pantalla TFT panorámica de 15 pulgadas. 16 millones de colores. Interfaz PROFINET. Interfaz MPI/PROFIBUS-DP. 12 MB de memoria de proyecto. Windows CE 6.0. Configurable a partir de WinCC Comfort V13 SP1. HSP.

SIMATIC s7, s7-plcsim v5.4 floating license for 1 user e-sw, sw and docu. on cd, license key on usb stick, class a,5 languages(g,e,f,i,s), as of step7 v5.4 incl. sp1 win2000prof,xpprof, reference-hw pg/pc

The Schneider Electric Modicon ABE7 IP20 Sub-base is an integral part of the Modicon ABE7 range, offering IP20 sub-bases for Telefast pre-wired systems. This sub-base is designed to distribute 8 analog input channels, isolated from each other. It comes with screw type terminals for electrical connection and a 25-way SUB-D connection to Programmable Logic Controllers (PLC).The product is rated IP20 and weighs 0.41kg. It is certified by LROS, DNV, UL, GL, BV and CSA, meeting CSA C22.2, IEC 61131 and UL 508 standards. This sub-base is compatible with Modicon X80 IO modules such as BMXAMI0800, BMXAMI0810, and BMEAHI0812.The product can be fixed by clips (35mm symmetrical DIN rail) and screws (solid plate with fixing kit). The Modicon ABE7 sub-base offers greater simplicity to rationalise wiring in automation system equipment. It enables pre-wired system connection and adaptation of control signals of PLC cards equipped with HE10 connectors.

This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 6000RPM and keyed shaft end without holding brake. It is an equipped with a single-turn SinCos Hiperface® feedback with 32,768 points/turn speed feedback resolution. It is a servo motor with a rated supply voltage of 480V, a continuous stall current of 5.04A and a continuous power of 2.36W. The shaft dimensions are 19mm (diameter) x 40mm (length). It is furnished with straight connectors for electrical connection. It is an IP54 rated product. The length of this product is 160.6mm and the centering collar dimensions are 3.5mm (depth) x 95mm (diameter) with 115mm mounting hole. It weighs 4.92kg. This range is compatible with Lexium 32 servo drives. This product is compatible with LXM32.D18N4 at 400V to 480V three phase. It supports 100mm international standard flange mount with a natural convection cooling system. Lexium 32 is a servo drive range provides drive and motor combination that has exactly the right power, performance and functionality. The Lexium 32 range of servo drives includes four servo drive models with power ratings from 0.15kW to 11kW and the servo motor ranges BMH and BSH series.

The Siemens DP/AS-INTERFACE LINK 20(R) is a versatile gateway designed to integrate PROFIBUS DP with AS-Interface networks. Compliant with the AS-Interface specification V3.0, this device ensures seamless communication and efficient data exchange between the two protocols. With a robust IP20 protection rating, it is suitable for various industrial environments.This gateway supports up to 62 AS-i slaves and provides reliable data transmission via PROFIBUS. It features a screw-type electrical connection for the AS-Interface and is powered directly from the AS-i network. The device includes status LEDs for easy monitoring and diagnostics, and supports configuration through a set pushbutton, STEP7, GSD, and command interface.Designed for ease of use and integration, the DP/AS-INTERFACE LINK 20(R) offers redundancy capability when used with Y-Link, ensuring high availability and reliability. It also includes galvanic isolation for enhanced safety and performance.Applications for this gateway include industrial automation, process control, and any scenario requiring integration of PROFIBUS DP and AS-Interface networks.

TeSys GV motor circuit breaker, 3 poles (3P), 1.6A/690V, for high starting current peak motor applications 0.37-0.55kW@400V. It provides a thermal-magnetic protection with a thermal setting range 1-1.6A, a magnetic tripping level at 20xIn, high breaking capacity Icu 100kA. Connection by screw clamp terminals. Start-stop control by toggle guaranteed for 100 000 cycles AC-3. It can be used for protection of 3-phase transformer applications. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

TeSys GV motor circuit breaker, 3 poles (3P), 25A/690V, for 3-phase motor applications 11kW@400V. It provides a magnetic protection with a tripping level at 14xIn, high breaking capacity Icu 100kA@400V. Connection by Everlink BTR screw terminals. Start-stop control by rotary handle guaranteed for 50 000 cycles AC-3. To complete motor protection, use it in association with a thermal overload relay LRD325 (to be ordered separately). Multi standards certified (IEC, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

The AQ 8XU/I HS analog output module is designed for the SIMATIC S7-1500 series, providing 8 configurable output channels with a resolution of 16 bits and an accuracy of 0.3%. This module operates with a supply voltage of 24 V, within a permissible range of 19.2 V to 28.8 V, and features reverse polarity protection. Each output can deliver voltage ranges of 0 to 10 V, 1 to 5 V, and -10 to +10 V, as well as current ranges of 0 to 20 mA, -20 to +20 mA, and 4 to 20 mA. The device has a minimum cycle time of 125 µs for all channels, independent of the number of activated channels. It supports diagnostic functions, including wire-break and short-circuit detection, with visual status indication via LEDs. The module is compliant with safety standards, suitable for safety-oriented shutdown applications up to SIL2 according to EN IEC 62061:2021, and Category 3 / PL d according to EN ISO 13849-1:2015. It is capable of operating in an ambient temperature range of -30 °C to 60 °C and can be installed at altitudes of up to 5,000 m. The Designation Code for this module is AQ 8XU/I HS.

The relay module PLC-RPT-230UC/21HC is designed for applications involving high continuous currents, incorporating a PLC-BPT.../21 HC basic terminal block with a Push-in connection system. It is suitable for installation on a DIN rail NS 35/7.5 and can handle a limiting continuous current of up to 10 A. The module operates with an input voltage of 230 V AC/DC, ensuring versatile compatibility in various settings. With a mechanical service life rated for 3x107 cycles and an operating factor of 100%, this module is built for durability. It includes one changeover contact and features safe isolation with reinforced insulation, making it compliant with the overvoltage category III and pollution degree 3 standards. The maximum power dissipation under nominal conditions is 0.99 W, and the rated surge voltage is 6 kV. Its typical input current at nominal voltage (UN) is 4.3 mA at 220 V DC, and it has a typical response time of 7 ms, with a release time of 10 ms. The contact material is AgNi, supporting a maximum switching voltage of 250 V AC/DC, while the minimum switching voltage is 12 V at 10 mA. The device can withstand a maximum inrush current of 30 A for 300 ms and has a switching capacity of 2 A at 24 V DC13. Dimensions are compact, with a width of 14 mm, height of 80 mm, and depth of 94 mm. The module operates effectively within an ambient temperature range of -40 °C to 55 °C, ensuring reliable performance in various environmental conditions. Compliance with IEC 60947-5-1 standards and electromagnetic compatibility directives further enhances its application reliability.

The Siemens SCALANCE W740 Key-Plug is a crucial component that activates the iFeatures for Siemens SCALANCE W devices operating in client mode. This feature-rich device provides an easy replacement option in case of failure and offers a convenient method to store configuration data. The Key-Plug is designed for all Siemens SCALANCE W devices equipped with a plug slot.

Experience the precision of our digital monitoring relay designed for current monitoring. With a size of 22.5mm, this device is compatible with IO-Link technology. It offers overcurrent and undercurrent transformer scaling factor hysteresis ranging from 0.01 to 5.0A, ensuring accurate readings. The ON-delay time tripping delay time feature provides a 1 change-over contact for seamless operation. Equipped with screw terminals for easy installation, this relay is the perfect choice for your automation needs.