Sensores de automatización

The PACT RCP-4000A-1A-D140 set includes a measuring transducer rated at 1 A and a Rogowski coil designed specifically for measuring AC currents in busbars and power lines. The Rogowski coil features a length of 450 mm and a diameter of 140 mm, with a signal line extending 3 meters.This device operates within an ambient temperature range of -30 °C to 80 °C for the measuring coil and -20 °C to 70 °C for the transducer. It is constructed with double insulation and provides reinforced electrical isolation according to IEC 61010-1 standards, ensuring safe operation in environments with overvoltage category III (1000 V). The typical measuring error is less than 1%, with a maximum transmission error of ≤ 0.5%, making it suitable for accurate current measurements.Additionally, the device supports a frequency range from 45 Hz to 65 Hz, while the input signal at 50 Hz is 100 mV for a primary rated current of 1000 A. The current output signal ranges from 0 A AC to 1 A AC, and the Rogowski coil is capable of detecting harmonics below 2 kHz. The measuring transducer features an IP20 protection rating, while the Rogowski coil is rated IP54.With a weight of 312.2 g including packaging, the product is compliant with EMC directives and is UL 508 Listed, ensuring electromagnetic compatibility and safety for industrial applications.

The EEM-MB371-24DC is a versatile energy measuring device designed for low-voltage applications, capable of handling voltages up to 690 V. It operates on a supply voltage of 24 V DC with a tolerance of ±25%, ensuring reliable performance across a range of conditions. The device supports true r.m.s. value measurement, delivering precise data on electrical parameters with an accuracy of 1%.Equipped with a direct Rogowski connection, this instrument allows for efficient current measurement up to 400 A. It leverages a scanning rate of 12.8 kHz to ensure rapid data acquisition, including harmonics up to the 63rd. The input voltage range is notably broad, accommodating direct measurements from 18 V AC to 690 V AC, and can also handle significantly higher voltages via external transformers.Communication with the device is facilitated through an integrated Modbus/TCP interface, enabling easy integration into existing systems. The housing is rated IP20, suitable for indoor use, and it is designed for horizontal DIN rail mounting. The operating temperature range spans from -25 °C to 70 °C, making it adaptable to various environments, while the device is also certified CE-compliant and UL/C-UL Listed under UL 61010-1.

The Inductive Proximity Sensor is a versatile tool for detecting metal objects without physical contact. It is available in cylindrical housings with varying sizes, including M8, M12, M18, and M30, and can be used in various forms such as standard cubic, rectangular, and flat shapes. This sensor operates on a wide range of VAC and VDC power supply voltages, making it suitable for use in diverse industries including assembly machines, robotics, machine tools, packaging, materials handling, conveying, and food and beverage processing. It complies with international standards such as CE, UL, CSA, CCC, CTick, and TÛV, and meets the stringent IP69K requirements for top-quality industrial applications. The Inductive Proximity Sensor is an economical solution for detecting slip, belt breakage, drive shaft shear, and overloading in various applications such as conveyor belts, bucket elevators, Archimedean screws, grinders, crushers, pumps, centrifugal driers, mixers, etc. It is a reliable choice for establishing an integrated rotation monitoring device.

The RF625T DISK-TAG features dimensions of 30 mm in diameter and 8 mm in height, designed for on-metal applications. It utilizes an ISO 18000-6C transponder and operates within the EPC Class 1 GEN 2 standard, with a frequency range of 865 to 868 MHz (ETSI). The embedded IMPINJI MONZA 4QT chip offers 128 bits of EPC data and includes 64 bytes of add-on memory.This transponder is capable of functioning under a wide temperature range from -25 to +85 degrees Celsius. Its robust design incorporates a plastic housing with an IP68/IPX9K protection rating, ensuring durability in demanding environments. The maximum transmission range of the tag can reach up to 1500 mm, enabling efficient communication.The minimum order quantity for this product is 10 units.

The 2Psid Differential Pressure Sensor is specifically crafted for board mounting applications. With an operational temperature range of -40 to 125 °C, this sensor ensures reliable performance in various environments. It features a pressure measurement capability of 2 psi and offers a mV output of 100mV. The sensor is characterized by an accuracy of ±0.1% Span Non-Linearity. Its compact dimensions of 14.7 x 15.2 mm (0.57 x 0.59 in) make it suitable for integration into space-constrained designs. Equipped with an 8 pin DIL packaging, the sensor does not include tube options, streamlining its installation process. The supply current for operation is rated at 1.5 mA, making it a practical choice for various applications requiring precise pressure measurements.

The XMLA pressure switch is engineered for precise detection of a single pressure threshold. Constructed with a robust zinc alloy body, it incorporates a range scale window for easy visibility. This device is specifically designed for monitoring air, fresh water, and hydraulic oils within a temperature range of up to 70°C. The switch is directly mounted on tubage, ensuring a reliable connection.With a mechanical durability rated for 8 million cycles, the XMLA minimizes maintenance needs across pressurized fluid circuits. It adheres to multiple industry standards, including CCC, EN/IEC 60947-5-1, CSA C22.2 No.14, LROS, UL 508, EAC, and BV, confirming its compliance and reliability.

The SIMATIC RF200 Reader RF260R with RS422 interface is designed for demanding industrial environments. This advanced RFID reader ensures reliable data communication using the 3964R protocol, making it suitable for various automation and identification tasks. With its IP67 protection, the RF260R is built to withstand harsh conditions, operating efficiently in temperatures ranging from -25 to +70 °C. The compact dimensions of 75x75x40 mm allow for easy integration into existing systems, while the integrated antenna enhances performance and simplifies installation.Key benefits include robust construction, compliance with industry standards, and seamless integration capabilities. The RF260R is ideal for applications in manufacturing, logistics, and supply chain management, where precise and reliable identification is crucial. This reader meets the stringent requirements of the EN 60947-5-2 standard, ensuring high quality and performance.

This compact, single mode reflex photoelectric sensor is designed with a robust PBT case, suitable for various applications. It operates on a supply voltage of 12V to 24V DC and features a mono-mode rectangular shape, allowing for direct surface or bracket mounting via three fixing points. The sensor is constructed from VALOX® PBT, which offers high strength and is ideal for high-temperature environments, while the PMMA lens is scratch-resistant, ensuring durability.Equipped with a single LED display, the sensor provides clear status indications. Its IP65 rating ensures protection against dust and water, making it suitable for harsh conditions. The operational temperature range extends from -25°C to +55°C, allowing for versatility in different environments. A standard M12 connector is included, ensuring compatibility with existing market sensor cabling.For enhanced safety, this device incorporates double insulation to protect users and systems from electrical shocks. Additionally, it holds CSA and UL certifications, affirming its compliance with industry standards.

This ultrasonic sensor, part of the XX range, is characterized by its cylindrical M18 design and a diffuse detection system, supporting a nominal sensing distance of 1 meter. With a rated supply voltage between 12V and 24V DC, it includes reverse polarity protection and operates with a current consumption of 30 mA. The sensor is equipped with a 5-pin M12 male connector for electrical connection, ensuring a reliable setup. Rated at IP65/IP67, the enclosure is constructed from PBT, while the front is made of epoxy, rubber, and resin. The dimensions of the sensor are 18 mm in width, 64 mm in depth, and 18 mm in height, with a total weight of 0.033 kg. The product meets various standards including CSA C22.2 No 14, EN/IEC 60947-5-2, and UL 508, and is certified by CE, CULus, EAC, E2, Ecolab, and RCM. Operating in diffuse, reflex, and thru beam modes, this ultrasonic sensor ensures contactless and reliable detection, unaffected by the target's shape, texture, color, or transparency. Its adjustable sensing range is from 0.105 to 1 meter, and it features a status LED to indicate output and echo states. The sensor also includes a teach mode for easy setup, making it versatile for various applications.

Bus system cable, CANopen®, DeviceNet™, 5-position, FRNC halogen-free, black, shielded, free cable end, on Socket straight M12, coding: A, cable length: 5 m, for outdoor applications, with high-grade steel knurl

The XUB photoelectric sensor employs a diffuse detection system, enabling it to function effectively at a nominal sensing distance of 0.1 m. It operates on a supply voltage of 12 to 24 VDC and features a robust nickel-plated brass housing, providing resistance against corrosion and non-magnetic interference. The sensor is designed for direct mounting on surfaces or brackets, facilitated by its outer thread and twin nuts.With an operational temperature range from -25°C to +55°C, this device is suitable for various environments. The sensor meets IP65, IP67, and IP69K protection standards, ensuring reliability in harsh conditions. It includes a single yellow LED indicator for status monitoring and is equipped with a standard M12 connector for compatibility with existing sensor cabling.This model features a PNP discrete output with a maximum switching capacity of 100 mA, and it is designed with double insulation for enhanced safety against electrical shocks. The sensor complies with several certifications including UL, CE, and CSA, ensuring adherence to industry standards.

The XS1 inductive proximity sensor is engineered for the detection of metallic objects without physical contact, minimizing wear and enabling the detection of delicate or freshly painted items. With an increased sensing range and flush mountable design, this cylindrical sensor has a diameter of 6.5mm and a length of 42.5mm.Constructed from nickel-plated brass, it features a three-wire DC connection with an M8 male connector. The sensor operates within a supply voltage range of 12 to 24 VDC and utilizes an NPN solid-state output with a normally open (NO) function.With an IP65 and IP67 rating, the device is suitable for use in harsh industrial environments. It can withstand temperatures ranging from -25 to 70 °C and offers vibration and shock resistance compliant with IEC standards. The nominal sensing distance is 2.5mm, with a response time of 0.2 ms and a maximum switching frequency of 2500 Hz. This sensor is part of the Telemecanique inductive proximity sensors XS range, designated for general-purpose applications.

This electromechanical pressure switch is engineered to operate at a maximum pressure of 160 bar, making it well-suited for applications such as hydraulic presses and water jet cutting machines. The device is designed for detection of a single threshold, with an adjustable range for switching points on rising pressures from 10 to 160 bar, and on falling pressures from 4.5 to 142 bar.The XMLA features a robust zinc alloy body that ensures durability under harsh conditions. It is rated for mechanical durability up to 6 million cycles, demanding minimal maintenance for pressurized fluid circuits. The housing is rated for IP65 protection, allowing it to function effectively in various environments.In terms of electrical specifications, the pressure switch includes a male connector with four pins, compatible with the EN 175301-803-A standard. It supports a line rated current of 3 A (B300, AC-15 at Ue = 120 V) and 1.5 A (B300, AC-15 at Ue = 240 V), with a rated insulation voltage of up to 500 V according to EN/IEC standards. The device is also equipped with silver contacts and snap-action auxiliary contacts for reliable performance.Compliance with multiple standards, including CCC, EN/IEC 60947-5-1, CSA C22.2 No.14, and UL 508, ensures that this pressure switch meets stringent safety and operational guidelines. The XMLA is designed for versatile installation directly onto tubing and can operate in ambient temperatures ranging from -25°C to 70°C.

The cylindrical ultrasonic sensor is engineered for the non-contact detection of various materials, specifically tailored for monitoring two distinct filling levels. With a diameter of 18 mm, this sensor features a robust plastic housing and is equipped with an M12, 4-pin male connector for electrical connection.It operates on a supply voltage range of 12 to 24 V DC and utilizes a PNP solid-state output with a normally open (NO) function. The sensor's sensing distance ranges from 0.051 m to 0.508 m, adjustable via a remote teach button, allowing for flexible installation and operation. The diffuse detection system is effective within a beam angle of 6 degrees, ensuring reliable performance.The device meets IP67 standards for ingress protection, making it suitable for a variety of industrial environments. With a repeat accuracy of 1.27% and a maximum switching current of 100 mA, this ultrasonic sensor ensures precise monitoring capabilities. The operational temperature range extends from -20°C to 65°C, complemented by robustness against electromagnetic interference and electrostatic discharge, as specified by IEC standards.Notably, the product is CE marked and adheres to environmental regulations, including RoHS compliance. The Designation Code is included in the range of Telemecanique Ultrasonic sensors, ensuring its identification within the product family.

The XS7 flat inductive proximity sensor features a compact design measuring 40 x 40 x 15 mm, housed in a durable PBT enclosure. It operates with a supply voltage range of 12V to 24V DC and is equipped with a standard M8 connector suitable for existing sensor cabling in the market. The sensor is designed for direct surface mounting, facilitated by four screw fixing points, ensuring stable and secure installation. This sensor maintains high performance under harsh conditions, with an IP67 rating that protects it from dust and water ingress, making it suitable for various industrial applications. It can function effectively in extreme temperatures ranging from -25°C to +70°C. The built-in yellow LED indicator provides clear output status, aiding in sensor setup and troubleshooting. With a switching capacity of up to 100 mA DC and overload protection, the XS7 sensor ensures reliable operation. It features a flush mountable detection face and a maximum operating zone of 12 mm, providing flexibility in installation. Certified with C-Tick, ECOLAB, CSA, and UL, this sensor meets rigorous industry standards for safety and performance.

The XMLA pressure switch features a fixed differential mechanism for accurately detecting a single pressure threshold, suitable for hydraulic oils operating at temperatures up to 160°C. Housed in a zinc alloy enclosure, it ensures durability and reliability in pressurized fluid circuits. With a mechanical lifespan of 6 million cycles, it minimizes maintenance needs. The device complies with multiple standards, including CCC and EN/IEC 60947-5-1, ensuring its suitability for various industrial applications.Configured for direct mounting on tubage, this pressure switch employs a piston as the pressure actuator. It is equipped with screw-clamp terminals for electrical connections, supporting wire sizes ranging from 0.5 to 2.5 mm². The product’s local display allows for easy monitoring of pressure levels, while its cable entry features a gland accommodating diameters from 9 to 13 mm.In terms of operational specifications, the switch can be adjusted for rising pressure detection between 5 and 70 bar and falling pressure detection from 2 to 62.5 bar. The maximum permissible accidental pressure is rated at 160 bar, with a destruction pressure threshold of 320 bar. Additionally, it is designed to withstand temperature extremes from -25 to 70 °C during operation and -40 to 70 °C during storage. The IP66 rating indicates its robust protection against dust and water ingress, conforming to EN/IEC 60529.

The XUY photoelectric sensor, designed with a fork configuration, utilizes a through-beam detection system for reliable performance. This sensor supports a nominal sensing distance of 120mm and offers programmable discrete outputs, allowing for either 1 normally opened (NO) or 1 normally closed (NC) configuration, with both PNP and NPN solid-state outputs available.Constructed from painted aluminium and polyamide/glass, this device provides durability and an IP65 protection rating, making it suitable for various industrial environments. Its 12...24 VDC supply voltage range includes reverse polarity protection, with a no-load current consumption of 40mA and a switching frequency of up to 10kHz. The sensor is equipped with an infrared LED for modulated emission.With a weight of 0.19kg, the XUY sensor is ideal for applications in material handling, packaging, labelling, assembly, lifts, escalators, and the food and beverage industry. It features a 4-pin M8 male connector for electrical connections and has a sensitivity setup controlled by a numeric potentiometer. Notably, it operates effectively in ambient temperatures ranging from -20°C to 60°C and withstands vibration and shock in accordance with IEC standards. Certifications include CE and cULus.

The limit switch XC Standard XCMD is a mechanical device that translates motion into an electrical signal, equipped with 1NC + 1NO snap action contacts for effective switching. Its operation is facilitated by a spring return metal roller lever that supports lateral approach from two directions, enabling versatility in installation.Constructed from Zamak, this fixed body limit switch measures 30mm in width, 16mm in depth, and 50mm in height. It incorporates a rotary head design, ensuring compatibility with various industrial applications including packaging, materials handling, and food processing. The operating head movement is rotary, and it is actuated by a 30° cam.Electrical connectivity is achieved through a removable cable connector, accompanied by a 3m cable. Rated for IP66, IP67, and IP68 protection, the device is suitable for harsh environments. Additionally, it has a mechanical durability of approximately 10 million cycles and an electrical durability of 5 million cycles, indicating long service life.This limit switch meets several international standards including UL 508, EN/IEC 60204-1, and CSA C22.2 No 14, ensuring compliance and reliability in various operational conditions. The product also features a positive opening mechanism, which is critical for safety in machine design.

Introducing our Cable-Operated Switch with Latching Button Reset. This top entry switch is designed to provide reliable operation and enhanced safety features. The metal enclosure ensures durability and resistance to harsh environments. With a cable pull capability of up to 25 m, this switch can be easily installed in various applications.The switch comes with a latching mechanism that adheres to the EN ISO 13850 standard, ensuring seamless operation and reduced maintenance. The button reset feature allows for quick and easy resetting of the switch. This switch is equipped with two NC contacts, making it suitable for a wide range of applications.The switch features a threaded opening width of 52mm, accommodating M20 x1.5 threads. Its robust design and high-quality components make it an ideal choice for industries requiring reliable and efficient operation. Whether you're in manufacturing, automation, or any other industry, our Cable-Operated Switch with Latching Button Reset is a reliable solution.

The MACX MCR-EX-SL-NAM-2T-SP is a specialized Ex i NAMUR Isolation Amplifier designed for operating proximity sensors and switches in potentially hazardous areas (Ex zones). This device ensures safe signal transmission by isolating the signals from the hazardous area, allowing them to be transmitted via two passive transistor outputs to the safe area. It is equipped with Line Fault Detection (LFD) for enhanced safety and 3-way isolation capabilities, achieving a Safety Integrity Level (SIL) of 2.