Sensores y dispositivos de medición

Inductive Sensor, Rated switching distance 1.5 mm, Cable length (L) 2 m, Flush, M8 × 1 threaded tube, Stainless steel, 1.4305 (AISI 303), DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection

The Turck BI1.5-EG08K-Y1 is an inductive sensor designed for precise and reliable operation. It features a rated switching distance of 1.5 mm, ensuring accurate detection in tight spaces. The cable…

The BI10-EM30-Y1X-H1141 Inductive Sensor is designed for precise switching at a rated distance of 10 mm. This sensor features a flush design and a M30 × 1.5 threaded tube, constructed from stainless…

Inductive Sensor, Rated switching distance 10 mm, Flush, M30 × 1.5 threaded tube, Chrome-plated brass, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Extended…

Inductive Sensor, Rated switching distance 10 mm, Flush, Rectangular, height 14 mm, Active face on top, Plastic, PBT‐GF30‐V0, Factor 1 for all metals, Resistant to magnetic fields, Extended…

Inductive Sensor, With Increased Switching Distance, Rated switching distance 15 mm, Flush, M30 × 1.5 threaded tube, Chrome-plated brass, Large sensing range, DC 3-wire, 10…30 VDC, NO contact, PNP…

Magnetic Field Sensor, Magnetic-inductive Proximity Sensor, Rated switching distance 90 mm, Cable length (L) 2 m, Threaded barrel, M12 x 1, Chrome-plated brass, Rated operating distance 90 mm with…

Magnetic Field Sensor, For Pneumatic Cylinders, Cable length (L) 2 m, For T-groove cylinders without mounting accessories, Optional accessories for mounting on other cylinder designs, One-hand…

The Turck BTS-DSU35-EBE3 End Position Damped Actuation Kit (Puck) is a high-quality accessory that offers precise and reliable operation. It features a stainless steel target to compensate larger…

The M2-QR24 Accessories, consisting of a Protecting Ring and Shield Plate, are designed to enhance the functionality of the RI-QR24 encoder. These accessories provide a hollow shaft with an internal…

The NI10U-M12-AN6X-H1141 Inductive Switch is designed for applications requiring extended switching distances. With a rated switching distance of 10 mm, this non-flush switch features a M12 × 1…

Inductive Sensor, With Extended Switching Distance, Rated switching distance 10 mm, Non-flush, M12 × 1 threaded barrel, Chrome-plated brass, Factor 1 for all metals, Protection class IP68, Resistant…

Inductive Sensor, With Extended Switching Distance, Rated switching distance 10 mm, Non-flush, M12 × 1 threaded barrel, Long version, Chrome-plated brass, Factor 1 for all metals, Protection class…

The NI12U-S18-AP6X Inductive Sensor is designed for reliable and efficient operation. It features a switching distance of 12 mm, with a cable length of 2 meters. This sensor is non-flush, threaded…

The Turck NI14-G18-ADZ30X2-B3331 Inductive Sensor is designed with an enhanced switching distance of up to 14 mm. This non-flush, threaded barrel sensor features a M18 x 1 connection and is…

This Turck NI14-M18-AP6X-H1141 Inductive Sensor boasts an increased switching distance of 14 mm. It is designed for non-flush installation and features a threaded barrel with a M18 x 1 connection…

The NI15U-M18-AP6X-H1141 Inductive Sensor is designed for applications requiring an extended switching distance. It boasts a rated switching distance of 15 mm, ensuring reliable operation even in…

PSE541 and PSE543 are remote vacuum sensors with a 1 to 5V analog signal output. The sensor construction optimizes space savings, for tight, constrained spaces. PSE541 is for a low vacuum (-101 to 0…

ISE35 is a digital pressure sensor that integrates with multiple regulators and FRL combinations from SMC, including series AC, AR, ARM, ARP and AW. The ISE35 mounts into a ported interface on any…

ISE20C is a digital pressure sensor offering compatibility with both compressed air and non-corrosive liquids. Compared to the ISE20, the ISE20C adds a 2nd switch output, as well as analog voltage or…