Piezas de repuesto y componentes ABB en línea – Soluciones de automatización de proveedores de confianza

The PSE72-600-70, a robust softstarter, boasts a rated maximum operational current of 72 A and operates within a voltage range of 208 to 600 V AC. It features a two-phase control with a soft start and stop through a voltage or torque ramp. The device is equipped with built-in bypass for easy installation, energy saving, and a relay output providing RUN, TOR, and Event signals in the NO state. The PSE72-600-70 offers functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. Its illuminated display uses symbols to become language neutral, enhancing its usability. As an option, you can add an identical external keypad with a rating of IP66. Communication with the PSE72-600-70 can be achieved through hardwire inputs Start/Stop or by Reset of fault. It also supports built-in fieldbus communication Modbus RTU and can be connected via an external adaptor and a Fieldbus plug. This softstarter is a perfect balance between high starting capacity and cost efficiency, making it suitable for small to medium-sized three-phase motors. Typical applications include pumps, fans, compressors, and conveyors. The PSE72-600-70 is a true general purpose softstarter, designed to cater to the needs of various industries while ensuring optimal performance and energy efficiency.

The PSTX142-600-70, a product from ABB, is a high-performance softstarter designed for medium to large-sized three-phase motors. It boasts a rated maximum operational current of 142A with an operating voltage range from 208V to 600V AC. The control voltage ranges between 100V and 250V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or torque ramp, with built-in bypass for easy installation and energy saving. It offers a RUN, TOR and Event signal from relay outputs in NO state. The PSTX also includes functions such as current limit, kickstart, analog output, EOL, motor heating, and pump cleaning. PSTX comes with standard features like jog, braking, stand-still brake, diagnostics, sequence start, and emergency/fire pump mode. It also has a detachable full graphic display with IP66 and 4x outdoor rating for easy interaction. Communication with PSTX can be done via hardwire inputs Start/Stop/Reset of fault, programmable digital inputs, Fieldbus communication Modbus RTU, and an external adaptor with a Fieldbus plug. The PSTX is suitable for medium to large-sized three-phase motors with nominal currents from 30A to 1250A inline connection or 52A to 2160A inside delta connection.

The Compact Pushbutton, also known as the CP1-10G-10, is an ideal choice for applications requiring a momentary operation and flush mounting. This pushbutton is characterized by its compact size and green color, making it easy to identify in any environment. The Momentary feature of this pushbutton allows for quick and efficient operation, while the Flush Mounting design ensures a seamless integration with your equipment. The Non-illuminated nature of this pushbutton adds to its sleek appearance, making it an attractive option for any application. Constructed from high-quality Black Plastic, this pushbutton is both durable and resistant to corrosion. It offers a single normally open (1NO) contact and a single normally closed (1NC) contact, making it versatile for various applications. With a voltage rating of up to 300V, this pushbutton can handle high-voltage environments with ease.

Introducing the ABB TMAX T5S 400 fixed three-pole breaker, designed for reliable protection of your electrical systems. This breaker features solid-state release technology and front terminal connections, ensuring a seamless integration into your AC power distribution network.Key Features:Fixed Three-Pole Design: Provides enhanced reliability and protection for your electrical circuitsFront Terminal Connections: Facilitates easy installation and maintenanceSolid-State Release Technology: Ensures quick and efficient operation during fault conditions

System pro M compact S200P miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 25 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200P comply with IEC/EN 60898-1, IEC/EN 609 47-2, UL1077 and CSA 22.2 No. 235, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200P to save 50% space.

The AF190-30-11-13 is a 3 pole - 1000 V IEC or 600 V UL contactor with pre-mounted auxiliary contacts and Main Circuit Bars, controlling motors up to 90 kW / 400 V AC (AC-3) or 125 hp / 480 V UL and switching power circuits up to 275 A (AC-1) or 250 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

The CT-ERD.12 is a single-function electronic time relay from the CT-D timer range. It provides an ON-delay (delay on make) function with 7 time ranges from 0.05 s to 100 h. This time relay operates with a rated control supply voltage of 24 - 48 V DC / 24 - 240 V AC and has a 1 c/o (SPDT) output rated at 250 V / 6 A.

The top part of the Three-position handheld device JSHD4 is designed for use with various bottom parts. It features no LEDs and no extra buttons, making it a straightforward tool to operate.This specific top part is not compatible with anti-tamper devices, ensuring its functionality remains unaltered in certain applications. To achieve full functionality, it must be paired with the appropriate bottom part, whether it's AA, AC or AL.

The softstarter PSE170-600-70 has a rated maximum operational current of 170 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

The PSR12-600-70 softstarter is designed for applications requiring a rated maximum operational current of 12 A. It operates within a voltage span of 208 to 600 V AC, with a control voltage range of 100 to 240 V AC at 50/60 Hz. The PSR softstarter features a two-phase control soft start and stop through a voltage ramp. It includes built-in bypass for easy installation and energy saving. The device also provides a RUN signal from a relay output in the normally open state. The start/stop ramp and time can be easily set using three potentiometers on the front of the unit. This softstarter is often used in combination with a manual motor starter (MMS) from ABB, and mechanical connection kits are available for this purpose. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range represents our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3 to 105 A and can manage up to 100 starts per hour. Common applications include pumps, fans, compressors, and conveyors.

AF09 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available.

The RCCBs F202 series provides robust protection against fault current to earth, safeguarding both individuals and installations. This range includes a diverse selection of standard instantaneous and selective AC and A types, complemented by configurations tailored for specific applications.

The OVR DIN rail surge protection device is a robust solution designed to safeguard electrical systems from surges. This three-pole device offers a high surge capacity of 15 kA, ensuring reliable protection against voltage spikes and transient overvoltages. With a maximum voltage rating of 320V, it is well-suited for applications requiring robust surge protection.

The Air Circuit Breaker E1.2B 1250 is designed with a four-pole configuration and front terminals. It incorporates a solid-state release mechanism known as Ekip Dip LSIG, ensuring reliable operation in AC applications.This model operates at a rated current of 1250 A and can withstand a rated operational voltage of 690 V AC. Its electrical durability is rated for 8,000 cycles at 440 V and 6,500 cycles at 500 to 690 V, making it suitable for demanding environments.With a rated short-circuit breaking capacity of 42 kA across various voltages, it provides robust protection for installations. The device's mechanical durability is rated for 20,000 cycles, ensuring longevity and reliability.In terms of dimensions, the breaker measures 280 mm in width, 296 mm in height, and 183 mm in depth, with a net weight of 16 kg. It is compliant with IEC standards and features a tightening torque of 45 N·m for secure installation.This product is classified under the designation code E1.2 and adheres to various environmental regulations, including RoHS compliance. Additional features include a high recyclability rate, supporting sustainability initiatives.

The E2.2H 1600 is a fixed four-pole air circuit breaker, specifically designed for reliable operation in AC applications. With a rated current of 1600 A, it operates efficiently up to 690 V AC. This model is equipped with a solid-state release mechanism and an Ekip Touch LI interface, allowing for enhanced control and monitoring. The breaker is designed for horizontal rear terminal connections and includes four auxiliary contacts for comprehensive functionality. With a mechanical durability rating of 25,000 cycles and an electrical durability of 12,000 cycles at 440 V, this circuit breaker ensures longevity and dependable performance in demanding environments. It also supports high short-circuit breaking capacities, rated at 100 kA for various voltages, ensuring robust protection for connected electrical systems. The rated impulse withstand voltage adheres to IEC 60947-2 standards, providing additional reliability under transient conditions. The dimensions of the E2.2H 1600 include a width of 366 mm, height of 371 mm, and depth of 270 mm, with a net weight of 53 kg. It features a tightening torque specification of 70 N·m for secure terminal connections. Furthermore, the product conforms to environmental standards, including RoHS compliance, and offers a recyclability rate of 79.3%.

The Phase Sequence Relay CM-PFE is a robust and reliable device, specifically engineered to monitor the phase sequence of electrical systems. Its width measures 22.5mm, making it suitable for various industrial installations. The measuring range spans from 208 to 440VAC, ensuring compatibility with a wide array of voltage requirements. Powered by an internal measuring circuit, this relay operates on the principle of closed circuits (1 c/o), providing accurate and dependable performance in real-time applications. Its compact design and high precision make it an ideal choice for industrial automation systems.

The E2.2N 1250 Air Circuit Breaker is designed for effective circuit protection in AC applications, supporting a rated current of 1250 A. It integrates a solid-state release mechanism (Ekip Touch LI) and is capable of handling operational voltages up to 690 V AC. With a mechanical durability rating of 25,000 cycles and an electrical durability that varies based on operational voltage, this device ensures reliable performance in demanding environments.Classified under the designation code, this circuit breaker supports a short-circuit breaking capacity of up to 66 kA across multiple voltage ratings including 220 V, 230 V, and 690 V. It also features a neutral pole current of 100% and a power loss of 83 W. The terminal connection type is rear flat horizontal with a tightening torque of 70 N·m.Additionally, the product complies with IEC standards and is designed with sustainability in mind, offering a recyclability rate of 79.3% according to EN45555. Its dimensions are 366 mm in width, 371 mm in height, and 270 mm in depth, with a net weight of 53 kg, making it suitable for various installation environments while maintaining a focus on eco-conscious design.

The M12 Y-connector facilitates the series connection of DYNlink devices, specifically designed for compatibility with Eden sensors and emergency stop buttons such as Smile Tina and Inca Tina. This connector features one M12-5 female connector (#2) for attaching the safety device, an M12-5 male connector (#1) for +24VDC, 0V, and the incoming dynamic signal, and another M12-5 female connector (#3) to extend the circuit to additional safety devices or to a Vital/Pluto safety PLC.This connector complies with the American Recovery and Reinvestment Act (ARRA) and the Buy American Act (BAA). It meets RoHS requirements in accordance with EU Directive 2011/65/EU and its Amendment 2015/863, effective July 22, 2019. The product dimensions are 20 mm in depth, 40 mm in height, and 35 mm in width, with a net weight of 0.02 kg, suitable for various applications including Magne 3A, Magne 3B, Adam DYN-Info M12-5, and Adam DYN-Reset M12-5. The connector is classified under WEEE Category 5, indicating it is small equipment with no external dimension exceeding 50 cm.

The E4.2H 3200 is a three-pole air circuit breaker designed for use in AC systems, featuring a solid-state release mechanism known as Ekip Touch LI. This device is equipped with four auxiliary contacts and operates effectively in both open and closed positions.With a rated current of 3200 A and a rated voltage of 690 V, this circuit breaker ensures reliable performance under varying conditions. It supports a short-circuit breaking capacity of 100 kA across multiple voltage levels, including 220 V AC through 440 V AC. The device's rated insulation voltage is 1000 V AC, while it withstands impulse voltages of up to 12 kV, conforming to IEC 60947-2 standards.The mechanical durability of the E4.2H is rated at 20,000 cycles, allowing up to 60 operations per hour, making it suitable for demanding environments. Additionally, it has a power loss of 743 W, contributing to its efficient operation.For environmental considerations, this product adheres to the ABB EcoSolutions criteria, emphasizing a recyclability rate of 77.4% in line with EN45555 standards. Furthermore, it meets various regulatory requirements, including RoHS compliance, ensuring minimal environmental impact throughout its lifecycle.

The E2.2S 2000 Ekip Dip LSIG is a fixed four-pole air circuit breaker characterized by its solid-state release, suitable for AC operation. This model is equipped with rear horizontal terminals and includes four auxiliary contacts.With a rated current of 2000 A and a rated operational voltage of 690 V AC, this circuit breaker ensures reliable performance under various conditions. It features a rated short-circuit breaking capacity of up to 85 kA at multiple voltages, including 400 V AC and 415 V AC, and maintains a short-circuit performance level of S.Its robust mechanical and electrical durability includes a mechanical lifespan of 25,000 cycles at a rate of 60 cycles per hour and an electrical durability rated for 10,000 cycles at 440 V and 8,000 cycles at 500 to 690 V. The circuit breaker is designed to meet various international standards, including IEC specifications, making it suitable for use in diverse applications.Further enhancing its functionality, the E2.2S 2000 offers a rated insulation voltage of 1000 V AC and a rated impulse withstand voltage of 12 kV per IEC 60947-2. The terminal connection type is rear flat horizontal, with a tightening torque of 70 N·m.This product is compliant with RoHS and other environmental standards, ensuring responsible use and recyclability. It is designated under the code 9AKK108468A1902 for environmental product declaration.