Piezas de repuesto y componentes ABB en línea – Soluciones de automatización de proveedores de confianza

The E4.2V 2500 Ekip Dip LSI 3p F HR is a fixed three-pole circuit breaker with terminals at the rear and solid-state release in AC power, designed for use in the ABB Ekip/DIP-LSI R 2500 system. It features four auxiliary contacts and a C.BREAKER that can be positioned open or closed.

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.

The XT4S 160 TMA 125-1250 3p F F is a high-performance circuit breaker designed for industrial applications. It features a robust construction and advanced thermomagnetic release mechanism, ensuring reliable protection against overcurrent and short-circuit conditions. This circuit breaker offers a wide current rating range of 125 to 1250 Amps, making it suitable for various power distribution systems. It is equipped with front terminals for easy connection and maintenance. The XT4S 160 TMA 125-1250 3p F F also complies with international safety standards, providing peace of mind for users.

The softstarter PSR60-600-70 has a rated maximum operational current of 60 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

The T16-5.7 thermal overload relay is an economical solution designed to provide efficient electromechanical protection for the main circuit. This device offers rapid and dependable protection for motors in the event of overload or phase failure, with a trip class 10 rating. It comes equipped with temperature compensation, trip contact (NC), signal contact (NO), and a selectable automatic- or manual reset mechanism. The relay also features a trip-free mechanism, STOP function, and a trip indication. For easy integration, the overload relays can be directly connected to mini contactors or block contactors. Single mounting kits are available as an optional accessory.

The CM-SRS.12S is a single-functional current monitoring relay from the CM single-phase monitors range. This monitoring relay operates with a rated control supply voltage of 24 - 240 V AC / DC and has a 1 c/o (SPDT) output contact rated at 250 V / 4 A. It provides a RMS measuring principle for DC and AC currents with 3 measuring ranges: 0.3-1.5 A, 1-5 A and 3-15 A and works according to the open-circuit principle. The CM-SRS.12S is configurable for over- or undercurrent monitoring, the hysteresis is adjustable within a range of 3 to 30 % of the threshold value. A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.

The AF52-40-00-13 is a 4 pole - 690 V IEC or 600 UL contactor with screw terminals, controlling motors up to 22 kW / 400 V AC (AC-3) and switching power circuits up to 100 A (AC-1) or 80 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

The PSTX300-600-70 Softstarter is designed to provide smooth and reliable motor starting for medium to large-sized three-phase motors. With a rated maximum operational current of 300 A and an operating voltage range of 208 to 600 V AC, this softstarter ensures efficient and controlled motor operation.The PSTX300-600-70 features a three-phase control soft start and stop through a voltage or torque ramp, making it ideal for applications requiring precise motor control. It includes a built-in bypass for easy installation and energy saving, as well as a detachable full graphic display with IP66 and 4x outdoor rating for user-friendly interaction.Key Features:Rated operational current: 300 AOperating voltage: 208...600 V ACControl voltage: 100...250 V AC at 50/60 HzThree-phase control soft start and stopBuilt-in bypass for energy savingDetachable full graphic display with IP66 and 4x outdoor ratingCurrent limit, kickstart, analog output, EOL, motor heating, and pump cleaning functionsJog, braking, stand-still brake, diagnostics, sequence start, and emergency/fire pump modeFieldbus communication options including Modbus RTU, Profinet, Profibus, Modbus TCP, Ethernet IP, and othersApplications:The PSTX300-600-70 is suitable for a wide range of applications, including:PumpsFansCompressorsConveyors

The RCCBs F200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous and selective AC and A types is completed with some configurations for special applications.

Signaling contacts SK1 with screw terminals signal the tripping of the manual motor starter. For SK1 the indication on the device itself is done with a protruding orange button. The contact positions of SK1 need to be manually reset after a tripping event by pushing the orange button. SK1 signaling contacts signal tripping regardless if it was caused by short-circuit, overload or electrical release (AA1 or UA1). They are attached on the right side of the manual motor starter. Signaling contacts SK1 are available as normally open or normally closed contacts.

AF38 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available.

The AF09-30-01-11 is a 3 pole - 690 V IEC or 600 UL contactor with 1 built-in auxiliary contact and screw terminals, controlling motors up to 4 kW / 400 V AC (AC-3) or 5 hp / 480 V UL and switching power circuits up to 25 A (AC-1) or 25 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (24-60 V 50/60 Hz and 20-60 V DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

Introducing the TMAX T5S 630 fixed three-pole breaker, designed with front terminals and a solid-state release. This innovative device is perfect for AC PR221DS-LS/I R 630 applications.The T5S 630 offers reliable protection and efficient performance, ensuring optimal safety in your electrical systems. Its robust design and advanced technology make it an ideal choice for various industrial and commercial settings.

The CT-AWE is a single-function electronic time relay from the CT-E timer range. It provides an impulse-OFF (trailing edge interval) function with a time range from 0.3 s to 30 s. This time relay operates with a rated control supply voltage of 24 V AC / DC and has a 1 c/o (SPDT) output rated at 250 V / 4 A. A control input works with voltage-related (non-floating) triggering.

The CM-UFD.M22 is a multi-functional grid feeding monitoring relay designed to provide interface protection between renewable energy systems and the public grid. This device ensures grid stability and prevents potential blackouts by disconnecting the renewable energy system from the public grid when voltage or frequency magnitudes exceed permissible limits. Upon grid stabilization, the system may automatically reconnect.This relay offers various monitoring functions such as over-/undervoltage, over-/underfrequency, rate of change of frequency (RoCoF), and vector shift monitoring to detect a loss of mains event. It is CEI 0-21 certified for safety and reliability.

The AF146-30-11-13 contactor is a robust solution for controlling motors up to 75 kW / 400 V AC or 100 hp / 480 V UL and switching power circuits up to 225 A (AC-1) or 200 A UL general use. Its AF technology offers a wide control voltage range of 100-250 V 50/60 Hz and DC, managing large control voltage variations and reducing panel energy consumptions.The contactor is equipped with built-in surge protection for added safety and reliability. It features a block type design that can be easily extended with add-on auxiliary contact blocks and a wide range of accessories. This compact solution is ideal for applications where space is limited.

The Switch Disconnector E203/125R is a product designed for commanding loads, following the specifications of EN 60947-3 and EN 60669-1. This device allows for quick removal without the need to dismantle the busbar. It features captive screws with recessed/slotted heads, compatible with Pozidrive size 2. An optional add-on of up to 3 auxiliary contact S2C-H6R is available. The integrated lay-on edge supports the labeling system ILS. For added security, a locking device can be used as an accessory to prevent unauthorized ON/OFF operations. This product has been approved by VDE, CCC, and KEMA.

The EF19-2.7 is an self-supplied electronic overload relay, which means no extra external supply is needed. It offers reliable and fast protection for motors in the event of overload or phase failure. Easy to use like a thermal overload relay and compatible with standard motor applications, the electronic overload relay is convincing, above all, due to its wide setting range, high accuracy, high operational temperature range and the possibility to select a trip class (10E, 20E, 30E). Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function and a trip indication. The overload relays are connected directly to the contactors. Single mounting kits are available as accessory. The EF19 and EF45 have ATEX and IECEx certification 1)

The ABB TMAX T5N 400 is a robust, reliable solution for power distribution in industrial applications. This fixed three-pole breaker is designed to handle high currents and offers enhanced safety features such as front terminals and solid-state release mechanism. It operates at an AC voltage of PR222DS/P-LSI R 400, providing a stable and efficient power supply. Key Features: Fixed three-pole design for enhanced reliability Front terminals for easy wiring Solid-state release mechanism for improved safety

The CP-C.1 24/10.0 is a power supply from the CP-C.1 range. The primary switch mode power supply offers a wide range input of 85-264 V AC and 90-300 V DC, rated input voltage is 110-240 V AC. The rated output power is 240 W, rated output current is 10 A at an output voltage of 24 V DC. The output voltage is adjustable within a range of 22.5 to 28.5 V DC. The power supply provides a U/I output characteristic with a power reserve of up to 50 % and allows parallel operation to increase capacity and to enable redundancy. Further features are: power factor correction acc. to EN 61000-3-2. Redundancy unit and buffer modules are available as accessories.