Piezas de repuesto y componentes ABB en línea – Soluciones de automatización de proveedores de confianza

Introducing the XT1B 160 TMD 20-450 3p F F Breaker, a robust and reliable solution designed for industrial applications. This breaker features a three-pole design with front terminals and a thermomagnetic release mechanism (TMD R 20-450 A). The XT1B 160 TMD 20-450 3p F F Breaker is equipped with advanced safety features, ensuring optimal protection for your electrical systems.

Key Features The MS325-25 manual motor starter by ABB is a 54 mm width device with a rated operational current of Ie = 25 A. This manual motor starter is designed to switch on and off motors and protect them from short-circuits, overload, and phase failures without the need for a fuse. It offers a rated service short-circuit breaking capacity of Ics = 50 kA at 400 VAC and trip class 10A. Additional Features The manual motor starter comes with built-in disconnect function, temperature compensation, trip-free mechanism, and a rotary handle with clear switch position indication. It is suitable for three- and single-phase applications. Accessories include auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks, and locking devices for protection against unauthorized changes.

The CM-MPS.21S is a multifunctional relay from the CM three-phase monitors range. It operates with a rated control supply voltage / three-phase measuring voltage of 180-280 V AC 50/60 Hz and has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. This relay is also suitable to monitor single-phase mains. It monitors all phase parameters such as over/undervoltage, phase unbalance, phase failure as well as an interrupted neutral. The corresponding threshold values are adjustable. Phase sequence monitoring as well as an ON or OFF tripping delay are selectable. The tripping delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.

The C.BREAKER SACE EMAX2 E2.2H 2000 FIXED THREE-POLE WITH TERMINALS REAR HORIZONTAL AND SOLID-STATE RELEASE IN AC is designed for the Ekip/Hi-Touch-LSIG R 2000. This breaker is fitted with 4 auxiliary contacts and a C.BREAKER in position open-closed.

The C.BREAKER TMAX T5N 400 is a fixed, three-pole breaker designed for high current applications. It features front terminals and a thermomagnetic release mechanism (TMA R 400) that can handle currents ranging from I3=2000 to 4000 A. This breaker is ideal for protecting electrical circuits in industrial environments where reliable power protection is crucial. Key Features: Front terminals for easy installation and maintenance Thermomagnetic release mechanism (TMA R 400) for enhanced safety and reliability Capable of handling high currents from I3=2000 to 4000 A

The T16-0.17 thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP function and a trip indication. The overload relays are connected directly to the mini contactors or block contactors. Single mounting kits are available as accessory.

Rated cross section up to 300 mm2 / 1000 Kcmil, IP20 protection cover, - Holding foot on DIN 3 rail with two position for easy mounting, lug mounting in accordance with NF C 20-130 and DIN 46234, various marking options, rail or base mounting.

The CM-MPN.52S is a multifunctional relay from the CM three-phase monitors range. It operates with a rated control supply voltage / three-phase measuring voltage of 350-580 V AC 50/60 Hz and has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. This relay monitors all phase parameters such as over/undervoltage, phase unbalance and phase failure. The corresponding threshold values are adjustable. The CM-MPN.52S also offers selection of phase sequence monitoring, automatic phase sequence correction as well as an ON or OFF tripping delay. The output contacts can be configured as 1x2 c/o (SPDT) contacts (common signal) or 2x1 c/o (SPDT) contact (separate signal for over- and undervoltage thresholds) operation. The tripping delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.

The T16-0.74 thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP function and a trip indication. The overload relays are connected directly to the mini contactors or block contactors. Single mounting kits are available as accessory.

The C.BREAKER TMAX T5N 630 FIXED THREE-POLE WITH FRONT TERMINALS AND SOLID-STATE RELEASE IN AC PR221DS-LS/I R 630 is a robust and reliable electrical component designed for industrial applications. It features three poles with front terminals and solid-state release, ensuring efficient power distribution and safety in your system. With a rating of 630A, it can handle high currents while maintaining stable operation. Its compact design makes it suitable for various installations, enhancing flexibility in your automation projects.

The ABB Tina 4A Connection Block is designed for series connection of up to four DYNlink devices. It features four M12-5 female connectors for sensors and allows the separate wiring of each device's information signal. The cable used for connecting to the Tina 4A should have a diameter ranging from 7 to 12 mm. Unused M12-connectors on the Tina 4A must be equipped with ABB Tina 1A blind plugs.The Tina devices are compatible with DYNlink safety circuits in Vital, Pluto and B&R X20, adapting them to safety components such as E-stops, switches, and light beams/curtains with dual outputs. The Tina is available in various versions depending on the type of safety component connected to the Vital, Pluto or B&R X20 circuit.

The PSE25-600-70 softstarter is engineered to handle a wide range of applications, offering a rated maximum operational current of 25 A and an operating voltage span from 208 V AC up to 600 V AC. This device features a two-phase control with a soft start and stop through a voltage or torque ramp, ensuring smooth operation and energy efficiency. The PSE25-600-70 is equipped with built-in bypass for easy installation and offers various protection functions such as current limit, kickstart, analog output, end of life (EOL), underload, and locked rotor protection. It also provides a RUN, TOR, and Event signal from a relay output in NO state. To enhance user interaction, the PSE25-600-70 incorporates an illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66 for added convenience. Communication options with the PSE25-600-70 include hardwire inputs Start/Stop or Reset of fault, built-in fieldbus communication Modbus RTU, and an external adaptor and Fieldbus plug. This softstarter is a true general-purpose solution, offering a perfect balance between high starting capacity and cost efficiency.

The AF580-30-11-70 is a 3 pole - 1000 V IEC or 600 V UL contactor with pre-mounted auxiliary contacts and Main Circuit Bars, controlling motors up to 315 kW / 400 V AC (AC-3) or 500 hp / 480 V UL and switching power circuits up to 800 A (AC-1) or 750 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

The System pro M compact S200P miniature circuit breakers are designed to provide current limiting functionality. They feature two distinct tripping mechanisms: a delayed thermal mechanism for overload protection and an electromechanic mechanism for short circuit protection. These circuit breakers are available in different characteristics (B, C, D, K, Z), configurations (1P, 1P+N, 2P, 3P, 3P+N, 4P), breaking capacities (up to 25 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the S200P product range comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 and CSA 22.2 No. 235 standards, making them suitable for residential, commercial, and industrial applications. The bottom-fitting auxiliary contact can be mounted on S200P to save 50% space.

The System pro M compact S200M miniature circuit breakers are engineered to provide reliable current limiting. They feature two distinct tripping mechanisms: the delayed thermal mechanism for overload protection and the electromechanic mechanism for short circuit protection. These circuit breakers are available in various characteristics (B, C, D, K, Z), configurations (1P, 1P+N, 2P, 3P, 3P+N, 4P), breaking capacities (up to 10 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs in the S200M range comply with IEC/EN 60898-1 and IEC/EN 60947-2, making them suitable for residential, commercial, and industrial applications. An auxiliary contact can be mounted on the bottom of these circuit breakers to save space.

The CP-C.1 24/5.0, a product from the CP-C.1 series, is a robust power supply that offers a broad spectrum of capabilities. This primary switch mode power supply is designed to handle a diverse range of input voltages, with an acceptable voltage range spanning from 85-264 V AC and 90-300 V DC. The rated input voltage is set at 110-240 V AC. The CP-C.1 24/5.0 boasts a high output power rating of 120 W, with an output current capacity of up to 5 A at an output voltage of 24 V DC. The output voltage is finely adjustable within the range of 22.5 to 28.5 V DC, providing flexibility in various applications. This power supply is equipped with a U/I output characteristic and offers a power reserve of up to 50%. It also supports parallel operation, allowing for increased capacity and redundancy. The power supply adheres to the power factor correction standard EN 61000-3-2. For enhanced functionality, additional accessories such as redundancy units and buffer modules are available. These can be integrated to further enhance the power supply's performance in specific applications.

The NF contactor relay is a versatile component used for managing auxiliary and control circuits. It features an electronic coil interface capable of accepting a broad spectrum of control voltages, ranging from 24V to 500V at 50/60Hz or 20V to 500V DC. This relay can handle large variations in control voltage and is designed for global use without the need for coil changes. It also includes built-in surge protection, eliminating the requirement for additional surge suppressors. Key Features: 4-pole contactor relay AC or DC operated control circuit Wide range of accessories available

The AF16-30-10-14 is a 3 pole - 690 V IEC or 600 UL contactor with 1 built-in auxiliary contact and screw terminals, controlling motors up to 7.5 kW / 400 V AC (AC-3) or 10 hp / 480 V UL and switching power circuits up to 30 A (AC-1) or 30 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (250-500 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

System pro M compact S200M miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 10 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200M comply with IEC/EN 60898-1 and IEC/EN 609 47-2, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200M to save 50% space.

The AF750-30-11 contactor is a robust electrical switch designed to handle high power applications. It features a wide control voltage range of 250-500V AC (50/60Hz) or DC, making it suitable for managing large control voltage variations in unstable networks. This contactor is capable of controlling motors up to 400 kW / 400 V AC and switching power circuits up to 1050 A AC or 900 A UL general use. The AF750-30-11 contactor is equipped with pre-mounted auxiliary contacts and Main Circuit Bars, enhancing its functionality and versatility. Its block type design allows for easy extension with add-on auxiliary contact blocks and a wide range of accessories, making it a flexible solution for various applications. Thanks to the AF technology, this contactor offers surge protection, ensuring reliable operation in challenging environments. It is designed to reduce panel energy consumption, contributing to more efficient power management.