Fluke Fluke P3116-2
Fluke Calibration P3100 Hydraulic Deadweight Testers Fluke P3116-2
Never miss out on the parts you need!
Register now to receive instant notifications soon as they become available.
Register NowBenefits of creating an account.
- Register for instant notifications on part availability
- Get real-time alerts on inventory changes
- Notifications about hte total available quantity and conditions for each product.
Additional information
Part Number | Fluke P3116-2 |
---|
Operating Fluid
Mineral oil | Shell spindle oil 22, our reference 55-655, viscosity 40 cs @ 20°C |
---|
Pressure Ranges
Oil operated | Ranges to 20,000 psi (1400 bar) |
---|
Accuracy
Accuracy1 | ±0.015% of reading (±0.008% optional) |
---|
Weight Increments
Minimum standard weight increments | Up to 500 psi (35 bar): 1 psi (0.1 bar)500 to 5000 psi (35 to 350 bar): 10 psi (1 bar)5000 to 20,000 psi (350 to 1400 bar): 20 psi (2 bar)Model P3112: 1 psi (0.1 bar) |
---|---|
Optional fractional weights | Up to 500 psi (35 bar): 0.1 psi (0.01 bar)500 to 5000 psi (35 to 350 bar): 1 psi (0.1 bar)5000 to 20,000 psi (350 to 1400 bar): 2 psi (0.2 bar) |
Materials of Construction
Standard weight material | Series 3 non-magnetic austenitic stainless steel |
---|---|
Weight density | 2.7 g/cm³ |
Optional fractional weights | Solution heat treated aluminum |
Piston material | Tungsten carbide with nickel binderDensity- 15.0 g/cm³ |
Cylinder material | Hardened martensitic steelTungsten carbide (water above 500 psi, 35 bar) |
Thermal coefficients of expansion | Oil piston/cylinder 16.5 ppm/°CWater (above 500 psi, 35 bar) 11 ppm/°C |
Options
PressCal software | Windows-based software program that allows users to easily apply all necessary corrections to enhance the deadweight tester performance. Calibration details are then stored and/or used to automatically create a calibration certificate. PressCal is provided as standard with all 0.008% instruments. |
---|---|
Fluids | Instruments can be supplied for use with Skydrol or brake fluids. Due to the aggressive nature of these fluids the standard nitrile seals and the acrylic reservoir tube will be replaced by either Viton or EPDM seals (as applicable) and an aluminum reservoir tube. For these or any other specialty fluid applications, please consult the factory. |
General
Test port adaptors | 1/8, 1/4, 3/8 and 1/2 NPT or BSP |
---|---|
Instrument weight | 36 lbs (16 kg) |
Instrument size (W x D x H) | 17.5 x 12 x 8.5 |
Mass set weight (typical) | 80 lbs (36 kg) |
Reservoir volume | 150 cc |
Screw press displacement | 5.5 cc |
Pump displacement | 4.7 cc per stroke |
O-ring seal materials | Buna N as standard, Viton and EPDM available |