Littelfuse
LLC14B15AX
1 / 1
Description
Operation Drain (Pump-Down Mode): When the liquid level rises and touches the probe, a fixed time delay begins. This time delay prevents rapid cycling of the output relay and its load. At the end of the time delay, the output relay energizes and remains energized until the liquid level falls below the probe. The output relay then de-energizes and remains de-energized until the liquid again touches the probe. Fill (Pump-Up Mode): When the liquid level falls below the probe, a fixed time delay begins. This time delay prevents rapid cycling of the output relay and its load. At the end of the time delay, the output relay energizes and remains energized until the liquid level rises and touches the probe. The output relay then de-energizes and remains de-energized until the liquid level again falls below the probe.- Part Number
- LLC14B15AX
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Specifications
- Input Voltage (V)
- 120VAC
- Input Tolerance (%)
- -0.3
- Input AC Line Frequency (Hz)
- 50/60Hz
- Output Type
- Electromechanical relay
- Output Form
- Non-isolated SPST and isolated SPDT contacts
- Output Load Rating (VA)
- 10A resistive @ 120/240VAC and 28VDC; 1/3hp @ 120/240VAC
- Time Delay Range
- 15s fixed
- Sense Voltage
- Low voltage AC between probe and common. Isolated from input and ouput.
- Sense Resistance (Ohms)
- Adjustable to 250kΩ
- Sense Resistance Tolerance
- Guaranteed range
- Control Type
- ON/OFF (single level) resistance sensor with built-in time delay to prevent rapid cycling
- Isolation Voltage (V)
- ≥1500V RMS between input output and probe
- Surge Protection
- IEEE C62.41-1991 Level A
- Circuitry
- Printed circuit board is conformal coated to resist moisture and corrosion
- Life
- Mechanical - 1 x 107; Electrical - 1 x 105
- Termination Type
- 0.25 in. (6.35mm) male quick connect terminals
- Mounting Method
- 0.50 in. (12.7mm) nylon standoffs with three #6 (M3.5 x 0.6) screws (use terminal 5 for probe common)
- Operating Temperature
- -20° to 55°C (-4°F to 131°F)
- Storage Temperature (F/C)
- -40° to 80°C (-40°F to 176°F)
- Dimensions
- 3.50 x 2.75 x 2.00 in. (88.9 x 69.9 x 50.9mm)
- Weight (lbs/g)
- ≅8.7oz (247g)
Documents
Data Sheet
DownloadRelated products
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther