Honeywell Części zamienne do automatyki przemysłowej

The Class 1000 (H10) Meter is a revenue-grade device that accurately measures kW and kWh for single-phase electrical systems. This unit is equipped to maintain readings during power outages, ensuring data integrity. Featuring a split-core current sensor, this meter is compatible with WEBs-AX Energy Analytics Tenant Billing and E-mon Energy Software for comprehensive energy management.This meter adheres to ANSI C12.20 and UL/CUL regulatory standards, ensuring compliance and reliability. With an overall width of 6 inches, height of 7.5 inches, and depth of 3 inches, it is designed for ease of installation in various applications. The device operates within a wide temperature range, from a minimum of -4 °F to a maximum of 122 °F, and can handle humidity levels up to 95% without condensation.Utilizing a 2-wire input voltage configuration, the Class 1000 meter supports frequencies of 50 Hz and 60 Hz and features a 2-line LCD display for easy reading of measurements. The accuracy of the meter is ±1% of the rated load, providing reliable performance across its operational range.

The Class 3400 (H34) Smart Meters integrate advanced dual protocol communications, allowing for simultaneous interaction with two energy monitoring systems. These systems may include Building Automation Systems (BAS) and billing or Measurement & Verification (M&V) reporting tools. The optional expanded feature package enhances functionality with built-in load control and two pulse outputs for kWh and kVARh measurement.Featuring a 4-line LCD display with backlight, this meter supports RS485 and Ethernet communications. It meets ANSI C12.20 standards and has UL/CUL regulatory approvals. With a current rating of 200 A and compatibility with 3 or 4 wire configurations, it operates effectively within a temperature range of -4 °F to 122 °F and at humidity levels up to 95% non-condensing. The Class 3400 is designed for precision with an accuracy of ±1% from 1% to 100% of rated load, making it suitable for commercial and industrial applications.

The CLASS 2000 SUBMETER is designed to provide precise kW and kWh readings for three-phase power systems, operating at a current rating of 800 A and a voltage configuration of 347/600 V AC. This meter is compliant with ANSI C12.20 standards and is UL/CUL approved, ensuring it meets industry requirements for accuracy and safety.It features a display with a two-line LCD for easy reading and operates effectively across a wide temperature range, from -4 °F to 122 °F (-20 °C to 50 °C), with a maximum operating humidity of 95% non-condensing. Notably, this meter does not include current sensors, allowing for flexibility in sensor integration based on specific application needs.With an accuracy rating of ±1% across the operational load range, the meter is designed for reliable monitoring in various commercial and industrial settings. It utilizes pulse output for communication and operates on a frequency of 50 Hz or 60 Hz. The enclosure type is designated as MMU, providing adequate protection for the internal components.

The SmartVFD BYPASS is a variable frequency drive (VFD) specifically developed for HVAC systems, facilitating energy savings by adjusting the speed of pumps and fans. With a power rating of 75 HP and operational voltage of 460VAC, this device is engineered to work either in conjunction with a building automation system or independently using its internal PID capabilities.This model includes a NEMA 12 enclosure and is equipped with two contactor bypasses for enhanced operational flexibility. It supports a continuous output current rating of 105 A, with overload capabilities of 1.1 times the rated current for short durations. The unit features a range of environmental tolerances, operating effectively in ambient temperatures from 14 °F to 104 °F and humidity levels up to 95%.Additional specifications include a minimum deceleration and acceleration time of 0.1 seconds, with maximum values reaching 3000 seconds. The VFD incorporates an EMC filter for reduced electromagnetic interference. Its compact dimensions—20 inches in width, 58.5 inches in height, and 13.5 inches in depth—coupled with a weight of 193 lbs, make it suitable for various installation environments. The SmartVFD BYPASS complies with regulatory standards such as CE and EN 61800-5-1, ensuring reliable performance.

The rotary actuator is specifically designed for fire damper applications, providing a stall torque of 240 in·lb and a maximum return timing of 15 seconds. It operates at a supply voltage of 24V AC and is compatible with dampers, utilizing a direct mount configuration. With an overall width of 5.13 inches, height of 8.9 inches, and depth of 3.32 inches, the actuator's housing is constructed from aluminum and has an IP rating of IP40. It operates effectively within a temperature range of 0 °F to 130 °F and a humidity range of 5% to 95% non-condensing. The actuator includes features such as two-position control signal capability (SPST) and is equipped with 3/8 inch flexible conduit connections. It is important to note that the actuator does not include a manual override and is not compatible with external auxiliary switches. This actuator adheres to regulatory approvals including UL555S up to 350°F, ensuring its reliability in critical fire and smoke control applications.

The SMARTVFD HVAC model operates at an input voltage of 600 (3PH) V AC and delivers a continuous output current rated at 9 A. Its NEMA 1 enclosure type ensures suitability for indoor applications, while the variable torque capability enhances energy efficiency in HVAC systems. The device features a maximum relay rated load of 250 Vac/8A, providing flexibility in various operational conditions.Equipped with both analog inputs and outputs (0-10 Vdc and 0(4)-20 mA), it allows for easy integration into both building automation systems (BAS) and standalone configurations via its internal PID functionality. The VFD supports a maximum deceleration and acceleration time of 3000 s, enabling precise control over motor speed adjustments.In terms of environmental specifications, it can operate in ambient temperatures ranging from 14 °F (-10 °C) to 104 °F (40 °C) and withstand storage conditions between -40 °F (-40 °C) and 158 °F (70 °C). This model complies with multiple regulatory approvals, including CE and EN 61800-5-1, ensuring reliability and safety in industrial applications.

This pneumatic actuator operates within a force range of 8 to 13 psi, ensuring effective control of valves and dampers in HVAC applications. With an overall diameter of 2.40625 in (61 mm) and a stroke length of 2.375 in (61 mm), it is suitable for various valve and damper sizes. The device features a spring return mechanism and can function independently or in sequence with other actuators. It supports a maximum operating pressure of 30 psi (207 kPa) and a minimum of 8 psi (55 kPa), making it versatile for different operational demands. The actuator is also built to withstand ambient temperatures ranging from 50 °F (10 °C) to 140 °F (60 °C) and can operate in humidity levels from 5% to 95% non-condensing. Included with the actuator is an external mounting bracket (14002850-001). The actuator's linear motion and pneumatic air connection type make it ideal for damper compatibility, enhancing its application in HVAC systems. This product is UL Recognized under Report R18118.

The resilient seated butterfly valve features a 2-way configuration with an 8-inch pipe connection size, ideal for managing chilled or hot water systems. The valve operates with a modulating control signal and is equipped with an electronic fail-safe actuator (MBE7U7BH/U), which meets NEMA 4X IP66/67 standards and includes a heater for optimal performance.Constructed from a polyester powder coated ductile iron body (ASTM A536), it includes a 420 stainless steel valve stem and a 304 stainless steel valve disc. The EPDM valve seat ensures reliable sealing, achieving a leakage rate of 0% and a rangeability ratio of 10:1. It is designed for a maximum operating pressure of 232 psi (1600 kPa) and can handle media temperatures up to 250 °F (121 °C).For installation, it utilizes ANSI Class 125/150 flange compatible connections featuring 8 flange bolts with a size of 0.750 in. Please note that this valve is not suitable for use with steam or fuels, and its operating ambient temperature range is from -22 °F (-30 °C) to 122 °F (50 °C). The valve's flow characteristic is modified equal percentage, and it has a flow coefficient of 1202 CV (1040 Kvs). The designation code for this valve is VR2M7UEBH/M.

This rotary actuator is designed for use in HVAC systems, featuring a torque rating of 3 Nm and an operational voltage of 24 V. Its sylkbus control signal enables integration with compatible systems, ensuring precise operation.Built with a universal shaft mounting and a self-centering shaft adapter, this actuator simplifies installation and enhances reliability. The actuator supports a runtime ranging from 30 to 180 seconds, allowing it to adapt to various operational requirements. The adjustable rotation limiter permits an angle of rotation up to 95°, optimizing its functionality for different applications.Constructed from plenum rated plastic, the actuator meets NEMA 2 standards and is rated IP54 for protection against dust and water ingress. It operates effectively in ambient temperatures from -40 °F to 150 °F and maintains performance in humidity levels from 5% to 95%, non-condensing. This actuator does not include manual override or feedback mechanisms, emphasizing its straightforward design.

The 3-way resilient seated butterfly valve, with a pipe connection size of 2.5 inches, is capable of providing both two-position and modulating control for chilled, hot, or cooling tower water applications. This valve features a durable body constructed from epoxy powder coated ductile iron (ASTM A536) and is compatible with ANSI Class 125/150 flanges, utilizing four bolts for secure attachment. Engineered for reliability, this valve utilizes a 416 stainless steel valve stem and a 304 stainless steel valve disc. The seat is made from EPDM material, ensuring effective sealing. With a maximum operating pressure of 232 psi (1600 kPa) and a maximum media temperature of 250 °F (121 °C), it is suitable for a range of operating conditions, although it is not intended for use with steam or fuels. Additional features include a flow coefficient of 75 CV (65 Kvs) and a modified linear flow characteristic, allowing for precise control in diverse applications. The valve operates effectively within a temperature range from -22 °F (-30 °C) to 122 °F (50 °C) ambient temperatures. For control, it accepts a fail-in-place actuator with an optional heater for enhanced performance in cold environments. The valve's start position is normally closed at Port A, and it is designed for a maximum differential pressure of 200 psi (1380 kPa).

The 3-way butterfly valve operates effectively in chilled or hot water systems and is suitable for two-position steam applications up to 50 psi. With a pipe connection size of 12 inches, it adheres to ASME/ANSI Class 150 standards.Constructed with a valve body made of carbon steel and a disc composed of 316 stainless steel, this valve is optimized for durability. The valve seat utilizes RTFE material, ensuring reliable performance. The flow characteristic is modified linear and unidirectional, providing precise control with a flow coefficient of 2660 CV.This valve operates within a temperature range of -22 °F to 400 °F (-30 °C to 204 °C) and has a maximum differential pressure rating of 150 psi (1034 kPa). The actuator included is a fail-in-place type, specifically the MBP7LBBH/U model, which has a 75% duty cycle and is rated NEMA 4X IP66/67, complete with a heater.It is important to note that this valve should not be used with fuels or modulating steam. The design includes 12 flange bolts, with a bolt size of 0.875 inches and a pitch of 9. Additionally, the valve stem is made from 17-4 PH stainless steel, enhancing its overall robustness. The valve starts in a normally closed position, offering a reliable solution for various fluid control applications.

The Class 5000 (H50) Smart Meters are designed for advanced energy monitoring and management, featuring dual protocol communications for interaction with up to two energy monitoring systems simultaneously. This capability includes integration with Building Automation Systems (BAS) for energy monitoring and billing, as well as Measurement and Verification (M&V) reporting tools. Equipped with a large 4-line LCD display, the meter provides clear visibility of energy consumption data. Communication is facilitated via RS485 and Ethernet protocols, enhancing connectivity options. The device operates within a temperature range of -4 °F to 122 °F (-20 °C to 50 °C) and can withstand humidity levels up to 95% non-condensing. Compliance with regulatory standards such as ANSI C12.20 and CE ensures the meter meets industry requirements. The enclosure is rated NEMA 4X, providing protection in various environments. With an accuracy of ±1% across all operating loads, this meter accurately monitors electrical usage, making it suitable for demanding commercial and industrial applications.

The Class 5000 (H50) Smart Meters are designed to facilitate advanced dual protocol communications, allowing for simultaneous interaction with two energy monitoring systems. These systems can include building automation systems (BAS) for energy monitoring and billing, as well as measurement and verification (M&V) reporting tools. Notably, the meter features a 4-line LCD display with backlighting and supports both RS485 and Ethernet communication protocols.With an operating temperature range from -4 °F (-20 °C) to 122 °F (50 °C) and an impressive maximum humidity tolerance of 95% non-condensing, the Class 5000 is suitable for diverse commercial and industrial applications. It includes two solid-core current sensors and is capable of handling 1 or 2 phases, with a current capacity of 100 A. The input voltage configuration can be either 3 or 4 wire, and the meter operates at frequencies of 50 Hz or 60 Hz.Regulatory approvals include CE and UL/CUL certification, and the enclosure is rated NEMA 4X, providing protection against dust and water. The meter delivers an accuracy of ±1% across a load range of 1% to 100%. This advanced class of KWH/Demand Meters provides 38 points of information for comprehensive electrical usage monitoring.

The Class 5000 Smart Meter (H50) is engineered to facilitate dual protocol communications, allowing for simultaneous interaction with two energy monitoring systems. This capability supports integration with Building Automation Systems (BAS) for energy monitoring and billing, as well as Measurement and Verification (M&V) reporting tools. The meter is equipped with an advanced 4-line LCD display that features backlighting and provides easy access to data.With dimensions of 6.5 inches in width, 7.8 inches in height, and a depth of 3.4 inches, the device has a weight of 5.1 lbs. It operates effectively within a temperature range of -4 °F to 122 °F and has a maximum operating humidity of 95% non-condensing. The input voltage configuration supports both 3 and 4 wire setups, and the frequency can accommodate 50 Hz or 60 Hz. Notably, the device does not include current sensors, hence the current sensor output is set at 2 V with a solid-core type. It conforms to regulatory approvals including ANSI C12.20 and UL/CUL standards. The enclosure type is classified as NEMA 4X, suitable for various industrial and commercial environments.

The Class 3200 (H32) Smart Meters are equipped with RS-485 communication capabilities, allowing for integration with multiple energy monitoring systems. This model supports simultaneous communication with up to two monitoring systems, including building automation systems and energy billing programs, as well as measurement and verification reporting tools. The Designation Code for this product is H32.Constructed to meet regulatory standards such as ANSI C12.20 and UL/CUL, this meter is suitable for commercial and industrial applications. It features a four-line LCD display with backlight and operates within a temperature range of -4 °F to 122 °F (-20 °C to 50 °C) while ensuring maximum humidity levels of 95% non-condensing.The meter supports both single-phase and two-phase configurations, with an input voltage of 347/600 V AC and a current rating of up to 400 A. Its accuracy is rated at ±1% across a load range from 1% to 100%. This model does not include current sensors, but it is compatible with split-core types, enhancing its flexibility for various setups.

The 5000 Class Smart Meter (H50) is engineered for advanced energy monitoring in commercial and industrial settings. With the capability to communicate simultaneously with two energy monitoring systems, it supports both Building Automation Systems (BAS) and measurement & verification (M&V) reporting tools.This device features an advanced 4-line LCD display with backlight for enhanced visibility and offers dual protocol communications, including Modbus RTU and Modbus TCP/IP, for versatile connectivity. The meter is built to operate within a temperature range of -4 °F to 122 °F (-20 °C to 50 °C) and can withstand humidity levels up to 95% non-condensing.Designed to accommodate a 3 or 4 wire input voltage configuration, the meter utilizes split-core current sensors, providing a current output of 2 V. With a total of 38 points of information available, this meter ensures precise monitoring of electrical usage with an accuracy of ±1% across its rated load range, complying with ANSI C12.20 and CE regulatory standards. The enclosure is made from JIC Steel, ensuring durability in demanding environments.

The Class 3400 Smart Meters, designated as H34, incorporate advanced dual protocol communications, allowing for simultaneous interaction with two energy monitoring systems, including Building Automation Systems (BAS) and Measurement & Verification (M&V) reporting tools. This model supports both single-phase and two-phase configurations, providing flexible integration options.Features include an expansive 4-line LCD display with backlighting for enhanced visibility and RS485 and Ethernet communication capabilities. The optional expanded feature package includes built-in load control functions and two pulse outputs for kWh and kVARh readings. The device is compliant with ANSI C12.20 and UL/CUL standards, ensuring reliable performance in various applications.With an accuracy of ±1% from 1% to 100% of the rated load, this fully electronic meter offers 38 points of information for comprehensive monitoring of electrical usage in commercial and industrial settings. The enclosure is made of JIC Steel, ensuring durability, while the operational temperature range extends from -4 °F (-20 °C) to 122 °F (50 °C), making it suitable for diverse environments.

The Class 3400 (H34) Smart Meter is equipped with advanced dual protocol communications, allowing for simultaneous interaction with up to two distinct energy monitoring systems. This includes compatibility with building automation systems (BAS) for energy monitoring, billing applications, and measurement and verification (M&V) reporting tools. This model features an optional expanded package that offers built-in capabilities for load control along with two pulse outputs for kWh and kVARh measurements. The device is distinguished by its large, advanced 4-line LCD display and supports RS485 and Ethernet communication protocols. In terms of dimensions, the overall width is 6.5 inches (166 mm), height is 7.8 inches (198 mm), and depth is 3.4 inches (86 mm). The meter weighs 7.28 pounds. It operates effectively within a temperature range of -4 °F to 122 °F (-20 °C to 50 °C) and can withstand a maximum humidity level of 95% non-condensing. Designed for accuracy within ±1% across the entire rated load (1% to 100%), the Class 3400 meter operates using either a single phase or two-phase configuration and features a split-core current sensor output of 2 V. The meter adheres to regulatory approvals including ANSI C12.20 and UL/CUL standards, making it suitable for commercial and industrial applications.

The Class 3400 Smart Meter (H34) incorporates sophisticated dual protocol communications, facilitating concurrent communication with two energy monitoring systems, such as Building Automation Systems (BAS) and measurement and verification (M&V) reporting tools. This model also offers an optional expanded feature package that includes built-in load control functions and dual pulse outputs for both kWh and kVARh monitoring.Featuring a four-line LCD display with backlight, this meter provides clear visibility of usage data. It supports RS485 and Ethernet communications, ensuring compatibility with various monitoring applications. The Class 3400 meets ANSI C12.20 and UL/CUL regulatory approvals, confirming its compliance with industry standards.Measuring at an overall width of 6.5 inches (166 mm), height of 7.8 inches (198 mm), and depth of 3.4 inches (86 mm), the meter has a weight of 7.32 lbs. It operates within a temperature range of -4 °F (-20 °C) to 122 °F (50 °C) and can handle humidity levels up to 95% non-condensing. The device operates on either 1 or 2 phases and includes two solid-core current sensors, with a maximum current rating of 200 A and voltage configurations of 277/480 V AC.

The Class 3400 (H34) Smart Meter is engineered for advanced energy monitoring, supporting dual protocol communications that allow integration with two distinct energy monitoring systems simultaneously, such as building automation systems (BAS) and measurement & verification (M&V) reporting tools. This model does not include sensors but offers an optional expanded feature package for enhanced functionalities, including load control capabilities and two pulse outputs for kWh and kVARh.Featuring a comprehensive 4-line LCD display with backlighting, the meter is capable of operating within a broad temperature range, from a minimum of -4°F (-20°C) to a maximum of 122°F (50°C), with a humidity tolerance of up to 95% non-condensing. The device is compliant with regulatory standards including ANSI C12.20 and UL/CUL, ensuring reliable performance in commercial and industrial settings.With a robust enclosure type of JIC Steel and dimensions of 6.5 inches in width, 7.8 inches in height, and 3.4 inches in depth, the meter's design facilitates installation and durability. It supports both 3 and 4 wire input voltage configurations and operates at frequencies of 50 Hz and 60 Hz. The accuracy of the meter is rated at ±1% across a load range of 1% to 100% of its rated capacity.