SSD1A320BDC1

Complementary

Network Frequency

47...440 Hz

Coordination Type

type 1 || type 2

[Uc] Control Circuit Voltage

4...32 V DC

Height

93.2 mm

Connections - Terminals

screw terminals, clamping connection capacity:1...4 mm², AWG 18...AWG 12 for input || screw terminals, clamping connection capacity:1...6 mm², AWG 18...AWG 10 for output

Output Voltage

48...600 V AC

Tightening Torque

1.5...1.7 N.m for control input || 13...15 lb.in for control input || 1.5...1.7 N.m for load output || 13...15 lb.in for load output

Insulation Resistance

1000 MOhm at 500 V DC

Maximum I²T For Fusing

409 A².s for 10 ms || 375 A².s for 8.33 ms

Maximum Voltage Drop

<1.3 V on-state

Dielectric Strength

4 kV AC for input/output circuit || 4 kV AC for input or output to case

Response Time

0.5 cycle (turn-on) || 0.5 cycle (turn-off)

Load Current

0.1-20 A

Motor Power Kw

0.37 kW/0.5 hp at 120 V AC || 1.12 kW/1.5 hp at 240 V AC || 2.24 kW/3 hp at 480 V AC

[Uimp] Rated Impulse Withstand Voltage

6 kV for input/output circuit || 6 kV for input or output to case

Net Weight

0.298 kg

Minimum Switching Voltage

4 V DC turn-on

Maximum Leakage Current

1 mA off-state

Device Presentation

complete product

Electromagnetic Compatibility

electrostatic discharge 6 kV criteria A contact discharge conforming to IEC 61000-4-2 || electrostatic discharge 8 kV criteria A air discharge conforming to IEC 61000-4-2 || conducted RF disturbances 10 V, 0.15...80 MHz criteria A level 3 conforming to IEC 61000-4-6 || electrical fast transient/burst immunity test 2 kV, 5/100 kHz criteria B output ports conforming to IEC 61000-4-4 || electrical fast transient/burst immunity test 1 kV, 5/100 kHz criteria B input ports conforming to IEC 61000-4-4 || radiated radio-frequency electromagnetic field immunity test 10 V/m, 80 MHz...1 GHz criteria A conforming to IEC 61000-4-3 || radiated radio-frequency electromagnetic field immunity test 3 V/m, 1.4...2 GHz criteria A conforming to IEC 61000-4-3 || radiated radio-frequency electromagnetic field immunity test 1 V/m, 2...2.7 GHz criteria A conforming to IEC 61000-4-3 || surge immunity test 1 kV criteria A output ports line to line conforming to IEC 61000-4-5 || surge immunity test 2 kV criteria B output ports line to earth conforming to IEC 61000-4-5 || radiated emission environment B for DC input supply conforming to IEC 60947-4-3 || conducted emission environment B for DC input supply conforming to IEC 60947-4-3 || immunity to microbreaks and voltage drops 30 %, 500 ms criteria A conforming to IEC 61000-4-11 || immunity to microbreaks and voltage drops 100 %, 20 ms criteria B conforming to IEC 61000-4-11

Absolute Maximum Voltage

1200 V

Dv/Dt

500 V/µs off-state at maximum rated voltage

Local Signalling

for control voltage LED (green)

Maximum Switching Voltage

1 V DC turn-off

Solid State Output Type

zero voltage switching

Contact Form

Form 5 semiconductor output DOL contactor

Width

22.5 mm

Input Current Limits

10-15 mA

Overvoltage Category

III

Inrush Current

300 A at 60 Hz

Depth

116.5 mm

Rated Duty

uninterrupted

Power Factor

0.5 with maximum load

Offer Sustainability

Rohs Exemption Information

Yes

Mercury Free

Yes

Environmental Disclosure

ENVPEP1508007EN

Sustainable Offer Status

Green Premium product

Reach Regulation

Reference contains Substances of Very High Concern above the threshold

California Proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Weee

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

China Rohs Regulation

X

Circularity Profile

ENVEOLI1508007EN

Eu Rohs Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Specifications

Range Of Product

Harmony Solid State Relays

Output Switching Mode

zero voltage switching

Product Or Component Type

solid state relay up to 20 A

Phase

1 phase

Number Of Channels

1

Mounting Support

35 mm symmetrical DIN rail conforming to IEC 60715

Line Rated Current

20 A

Product Configuration Type

relay configuration

Device Short Name

SSD1

Environment

Ambient Air Temperature For Operation

-40-80 °C

Standards

IEC 61373:class B: category 1 || IEC 60947-4-3 || IEC 62314 || IEC 60950-1 || CSA C22.2 No 14-13 || UL 508

Pollution Degree

2

Vibration Resistance

0.75 mm (f = 10-150 Hz) conforming to IEC 60068-2-6

Shock Resistance

50 gn for 11 ms (peak acceleration) , longitudinal position conforming to IEC 60068-2-27 || 30 gn for 11 ms (peak acceleration) , vertical position conforming to IEC 60068-2-27

Ip Degree Of Protection

IP20

Flame Retardance

V-0 conforming to UL 94

Ambient Air Temperature For Storage

-40-100 °C

CAD Models

traceparts

Download