- Connection type 1
- Installation side
- Connection technology
- PUSH WIRE®
- Actuation type
- Push-in
- Connectable conductor materials
- Copper || Aluminum
- Connectable conductor materials (note)
- Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste <a href="https://www.wago.com/249-130">249-130</a> is used for termination.“Alu-Plus” Contact Paste Advantages:Automatically destroys the oxide film during clamping.Prevents fresh oxidation at the clamping point.Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).Provides long-term protection against corrosion.Using terminal blocks with CAGE CLAMP® Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus” Contact Paste.For spring clamp connections with PUSH WIRE® connection technology, WAGO recommends that the aluminum conductor first be cleaned and then immediately inserted into the clamping unit filled with “Alu-Plus” contact paste.It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::2.5 mm² = 16 A4 mm² = 22 A
- Solid conductor
- 1 … 2.5 mm² / 14 … 12 AWG
- Strip length
- 9 … 11 mm / 0.35 … 0.43 inches
- Wiring direction
- Side-entry wiring
Trusted Automa.Net Supplier
Trusted Automa.Net Supplier
Trusted Automa.Net Supplier
Trusted Automa.Net Supplier
Trusted Automa.Net Supplier
Trusted Automa.Net Supplier
Trusted Automa.Net Supplier
