- Circle Diameter Of The Mounting Holes
- 63 mm
- Peak Stall Torque
- 2.5 N.m 115...480 V three phase
- Number Of Mounting Holes
- 4
- Continuous Power
- 530 W
- Shaft Diameter
- 9 mm
- Nominal Output Power
- 160 W 115 V single phase || 310 W 230 V single phase || 600 W 400 V three phase || 670 W 480 V three phase
- Maximum Mechanical Speed
- 9000 rpm
- Mounting Holes Diameter
- 5.5 mm
- Type Of Cooling
- natural convection
- Holding Torque
- 0.8 N.m
- Maximum Radial Force Fr
- 370 N 1000 rpm || 290 N 2000 rpm || 260 N 3000 rpm || 230 N 4000 rpm || 220 N 5000 rpm || 200 N 6000 rpm || 190 N 7000 rpm || 190 N 8000 rpm
- Encoder Type
- absolute multiturn SinCos Hiperface
- Mounting Support
- international standard flange
- Rotor Inertia
- 0.117 kg.cm²
- Number Of Motor Poles
- 3
- Back Emf Constant
- 40 V/krpm 20 °C
- Maximum Axial Force Fa
- 40 N
- Ip Degree Of Protection
- motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
- Shaft End
- smooth shaft
- Centring Collar Depth
- 2 mm
- Nominal Speed
- 4000 rpm 230 V single phase || 9000 rpm 480 V three phase || 2000 rpm 115 V single phase || 8000 rpm 400 V three phase
- Electrical Connection
- rotatable right angled connector
- Holding Brake
- with
- Speed Feedback Resolution
- 128 periods
- Stator Resistance
- 17.4 Ohm
- Continuous Stall Current
- 1.2 A
- Nominal Torque
- 0.77 N.m 115 V single phase || 0.75 N.m 230 V single phase || 0.63 N.m 400 V three phase || 0.63 N.m 480 V three phase
- Shaft Length
- 20 mm
- Phase
- three phase
- Length
- 181 mm
- Net Weight
- 1.6 kg
- Maximum Current Irms
- 4.8 A
- Torque Constant
- 0.59 N.m/A 120 °C
- Centring Collar Diameter
- 40 mm
- Continuous Stall Torque
- 0.71 N.m 115...480 V three phase
- Stator Inductance
- 53.54 mH
- Motor Flange Size
- 55 mm
- [Us] Rated Supply Voltage
- 115...480 V