- Circle Diameter Of The Mounting Holes
- 63 mm
- Continuous Power
- 680 W
- Maximum Mechanical Speed
- 9000 rpm
- Maximum Radial Force Fr
- 190 N 8000 rpm || 390 N 1000 rpm || 310 N 2000 rpm || 270 N 3000 rpm || 240 N 4000 rpm || 230 N 5000 rpm || 210 N 6000 rpm || 200 N 7000 rpm
- Encoder Type
- absolute single turn SinCos Hiperface
- Mounting Support
- international standard flange
- Rotor Inertia
- 0.134 kg.cm²
- Number Of Motor Poles
- 3
- Back Emf Constant
- 41 V/krpm 20 °C
- Maximum Axial Force Fa
- 40 N
- Centring Collar Depth
- 2 mm
- Holding Brake
- without
- Speed Feedback Resolution
- 128 periods
- Shaft Length
- 20 mm
- Phase
- three phase
- Length
- 176.5 mm
- Net Weight
- 1.8 kg
- Maximum Current Irms
- 6.5 A
- Centring Collar Diameter
- 40 mm
- Stator Inductance
- 37.98 mH
- Motor Flange Size
- 55 mm
- [Us] Rated Supply Voltage
- 115...480 V
- Peak Stall Torque
- 3.5 N.m 115...480 V three phase
- Number Of Mounting Holes
- 4
- Shaft Diameter
- 9 mm
- Key Width
- 3 mm
- Nominal Output Power
- 240 W 115 V single phase || 460 W 230 V single phase || 880 W 400 V three phase || 970 W 480 V three phase
- Mounting Holes Diameter
- 5.5 mm
- Type Of Cooling
- natural convection
- Ip Degree Of Protection
- motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
- Shaft End
- parallel key
- Nominal Speed
- 4000 rpm 230 V single phase || 9000 rpm 480 V three phase || 2000 rpm 115 V single phase || 8000 rpm 400 V three phase
- Electrical Connection
- rotatable right angled connector
- Stator Resistance
- 10.4 Ohm
- Continuous Stall Current
- 1.7 A
- Nominal Torque
- 1.13 N.m 115 V single phase || 1.1 N.m 230 V single phase || 0.81 N.m 400 V three phase || 0.81 N.m 480 V three phase
- Torque Constant
- 0.62 N.m/A 120 °C
- Continuous Stall Torque
- 1.05 N.m 115...480 V three phase