- Circle Diameter Of The Mounting Holes
- 115 mm
- Continuous Power
- 1900 W
- Maximum Mechanical Speed
- 6000 rpm
- Maximum Radial Force Fr
- 990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm
- Encoder Type
- absolute multiturn SinCos Hiperface
- Mounting Support
- international standard flange
- Rotor Inertia
- 2.31 kg.cm²
- Number Of Motor Poles
- 4
- Back Emf Constant
- 77 V/krpm 20 °C
- Maximum Axial Force Fa
- 160 N
- Centring Collar Depth
- 3.5 mm
- Holding Brake
- without
- Speed Feedback Resolution
- 128 periods
- Shaft Length
- 40 mm
- Phase
- three phase
- Length
- 204.5 mm
- Net Weight
- 5.8 kg
- Maximum Current Irms
- 17.1 A
- Centring Collar Diameter
- 95 mm
- Stator Inductance
- 19.5 mH
- Motor Flange Size
- 100 mm
- [Us] Rated Supply Voltage
- 115...480 V
- Peak Stall Torque
- 18.3 N.m 115...480 V three phase
- Number Of Mounting Holes
- 4
- Shaft Diameter
- 19 mm
- Key Width
- 6 mm
- Nominal Output Power
- 580 W 115 V single phase || 1090 W 230 V single phase || 1930 W 400 V three phase || 2210 W 480 V three phase
- Mounting Holes Diameter
- 9.0 mm
- Type Of Cooling
- natural convection
- Ip Degree Of Protection
- motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5 || housing IP67 EN/IEC 60034-5
- Shaft End
- parallel key
- Nominal Speed
- 1000 rpm 115 V single phase || 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
- Electrical Connection
- straight connector
- Stator Resistance
- 2.4 Ohm
- Continuous Stall Current
- 4.8 A
- Nominal Torque
- 5.5 N.m 115 V single phase || 5.2 N.m 230 V single phase || 4.6 N.m 400 V three phase || 4.4 N.m 480 V three phase
- Torque Constant
- 1.21 N.m/A 120 °C
- Continuous Stall Torque
- 5.8 N.m 115...480 V three phase