6048294

Electrical Data

Initialization Time

≤ 2 ms (Valid positional data can be measured once this time has elapsed)

Supply Voltage

18 V ... 33 V

Power Consumption

2 W

Ambient Data

EMC

According to EN 61000-6-2 and EN 61000-6-3

Enclosure Rating encoder

IP 65

Enclosure Rating mechanic

IP 50

Resistance to shocks

50 g, 6 ms (according to EN 60068-2-27)

Resistance to vibration

4 g, Sinus 5 Hz ... 100 Hz (according to EN 60068-2-6)

Working Temperature Range (encoder)

–30 °C ... +70 °C

Working Temperature Range (mechanics)

–30 °C ... +70 °C

Working Temperature Range (combination)

Defined by the higher minimum and lower maximum value of the operating temperature of the encoder and the mechanism

Classifications

ECl@ss 5.0

27270590

ECl@ss 5.1.4

27270590

ECl@ss 6.0

27270590

ECl@ss 6.2

27270590

ECl@ss 7.0

27270590

ECl@ss 8.0

27270590

ECl@ss 8.1

27270590

ECl@ss 9.0

27270590

ETIM 5.0

EC001486

ETIM 6.0

EC001486

UNSPSC 16.0901

41112113

Mechanical Data

Mass (including encoder)

2.3 kg

Mass (mechanics)

1.9 kg

Measuring wire Material

Highly flexible stranded steel 1.4401 stainless steel V4A

Mass (measuring wire)

1.2 g/m

Housing Material, wire draw mechanism

Plastic, Noryl

Length of wire pulled out per revolution

555 mm

Spring return force

Approx. 9 N ... approx. 12 N (These values were measred at an ambient temperature of 25 °C. There may be variations at other temperatures)

Life of wire draw mechanism

1 million cycles (A cycle consists of the wire being pulled out and drawn in)

Actual wire draw Length

10.2 m

Measuring wire Diameter

0.55 mm

Wire acceleration

8 m/s²

Operating speed

4 m/s

Mounted encoder

ACM60

Part number encoder

6045312

Mounted mechanic

MRA-G190-110D3

Part number mechanic

5326242

Interfaces

Encoder

Absolute encoders

Electrical interFace

4 mA ... 20 mA, Analog

Connection Type

Male connector, radial

Clock Frequency

32 kHz

Set (electronic adjustment)

Über Programmierfolie

Performance

Measurement Range

0 m ... 10 m

Repeatability

≤ 0.2 mm (Value applies to wire draw mechanism)

Linearity

≤ ± 2 mm (Value applies to wire draw mechanism)

Hysteresis

≤ 0.4 mm (Value applies to wire draw mechanism)

Resolution (wire draw + encoder)

0.03 mm (The values shown have been rounded) (Example calculation based on the BCG08 with PROFINET: 230 mm (wire draw length per revolution - see Mechanical data): 262,144 (number of steps per revolution) = 0.001 mm (resolution of wire draw + encoder combination))

Documents