ATV61HC13N4

1 / 1

Part Number: ATV61HC13N4

Get up to 90 days payment terms from 500+ suppliers
Reselling discounts up to 40%!

Send request for price

Payment methods:

Request a Quote and we will send you information on availability and price.

Main

Commercial Status: Commercialised
Range of product: Altivar 61
Product or component type: Variable speed drive
Product specific application: Pumping and ventilation machine
Component name: ATV61
Motor power kW: 132 kW 3 phasesat 380...480 V
Motor power hp: 200 hp 3 phasesat 380...480 V
[Us] rated supply voltage: 380...480 V (- 15...10 %)
Phase: 3 phases
Line current: 239 Afor 380 V 3 phases 132 kW / 200 hp
Line current: 224 Afor 480 V 3 phases 132 kW / 200 hp
EMC filter: Class C2 EMC filter integrated
Assembly style: With heat sink
Apparent power: 157.3 kVAfor 380 V 3 phases 132 kW / 200 hp
Prospective line Isc: 35 kA 3 phases
Maximum transient current: 310.8 Afor 60 s 3 phases
Nominal switching frequency: 2.5 kHz
Switching frequency: 2.5...8 kHz with derating factor
Switching frequency: 2...8 kHz adjustable
Asynchronous motor control profile: Voltage/frequency ratio, 2 points
Asynchronous motor control profile: Voltage/frequency ratio, 5 points
Asynchronous motor control profile: Flux vector control without sensor, standard
Asynchronous motor control profile: Voltage/frequency ratio - Energy Saving, quadratic U/f
Synchronous motor control profile: Vector control without sensor, standard
Communication port protocol: CANopen
Communication port protocol: Modbus
Type of polarization: No impedance Modbus
Option card: Profibus DP V1 communication card
Option card: Profibus DP communication card
Option card: Multi-pump card
Option card: Modbus/Uni-Telway communication card
Option card: Modbus TCP communication card
Option card: Modbus Plus communication card
Option card: METASYS N2 communication card
Option card: LonWorks communication card
Option card: Interbus-S communication card
Option card: I/O extension card
Option card: Fipio communication card
Option card: Ethernet/IP communication card
Option card: DeviceNet communication card
Option card: Controller inside programmable card
Option card: CC-Link communication card
Option card: BACnet communication card
Option card: APOGEE FLN communication card

Complementary

Product destination: Asynchronous motors
Product destination: Synchronous motors
Supply voltage limits: 323...528 V
Supply frequency: 50...60 Hz (- 5...5 %)
Network frequency limits: 47.5...63 Hz
Continuous output current: 259 Aat 2.5 kHz, 460 V 3 phases
Continuous output current: 259 Aat 2.5 kHz, 380 V 3 phases
Speed drive output frequency: 0.1...500 Hz
Speed range: 1...100 in open-loop mode, without speed feedback
Speed accuracy: +/- 10 % of nominal slip 0.2 Tn to Tn torque variation without speed feedback
Torque accuracy: +/- 15 % in open-loop mode, without speed feedback
Transient overtorque: 130 % of nominal motor torque, +/- 10 %for 60 s
Braking torque: 30 % without braking resistor
Regulation loop: Frequency PI regulator
Motor slip compensation: Adjustable
Motor slip compensation: Automatic whatever the load
Motor slip compensation: Can be suppressed
Motor slip compensation: Not available in voltage/frequency ratio (2 or 5 points)
Local signalling: 1 LED red presence of drive voltage
Isolation: Between power and control terminals
Type of cable: Without mounting kit: 1-strand IEC cableat 113 °F (45 °C), copper 90 °C XLPE/EPR
Type of cable: Without mounting kit: 1-strand IEC cableat 113 °F (45 °C), copper 70 °C PVC
Type of cable: With UL Type 1 kit: 3-strand UL 508 cableat 104 °F (40 °C), copper 75 °C PVC
Type of cable: With an IP21 or an IP31 kit: 3-strand IEC cableat 104 °F (40 °C), copper 70 °C PVC
Electrical connection: PC/-, PO, PA/+ terminal 2 x 150 mm² / 2 x 250 kcmil
Electrical connection: PA, PB terminal 60 mm² / 250 kcmil
Electrical connection: L1/R, L2/S, L3/T, U/T1, V/T2, W/T3 terminal 2 x 100 mm² / 2 x 250 kcmil
Electrical connection: AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR terminal 2.5 mm² / AWG 14
Tightening torque: PA, PB 106.19 lbf.in (12 N.m) / 106 lb.in
Tightening torque: PC/-, PO, PA/+ 362.83 lbf.in (41 N.m) / 360 lb.in
Tightening torque: L1/R, L2/S, L3/T, U/T1, V/T2, W/T3 212.39 lbf.in (24 N.m) / 212 lb.in
Tightening torque: AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR 5.31 lbf.in (0.6 N.m)
Supply: Internal supply 24 V DC (21...27 V), Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, External supply 24 V DC (19...30 V), 30 W
Analogue input number: 2
Analogue input type: AI2 software-configurable voltage 0...10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits
Analogue input type: AI2 software-configurable current 0...20 mA, impedance 242 Ohm, resolution 11 bits
Analogue input type: AI1-/Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 bits + sign
Sampling duration: Discrete input LI6 (if configured as logic input) 2 ms, +/- 0.5 ms
Sampling duration: Discrete input LI1...LI5 2 ms, +/- 0.5 ms
Sampling duration: Analog output AO1 2 ms, +/- 0.5 ms
Sampling duration: Analog input Al2 2 ms, +/- 0.5 ms
Sampling duration: Analog input AI1-/Al1+ 2 ms, +/- 0.5 ms
Accuracy: AO1 +/- 1 % for a temperature variation 60 °C
Accuracy: AI2 +/- 0.6 % for a temperature variation 60 °C
Accuracy: AI1-/Al1+ +/- 0.6 % for a temperature variation 60 °C
Linearity error: AO1 +/- 0.2 %
Linearity error: AI2 +/- 0.15 % of maximum value
Linearity error: AI1-/Al1+ +/- 0.15 % of maximum value
Analogue output number: 1
Analogue output type: AO1 software-configurable logic output 10 V, AO1 software-configurable voltage, analogue output range 0...10 V DC, impedance 470 Ohm, resolution 10 bits
Analogue output type: AO1 software-configurable current, analogue output range 0...20 mA, impedance 500 Ohm, resolution 10 bits
Discrete output number: 2
Discrete output type: (R2A, R2B) configurable relay logic NO, electrical durability 100000 cycles
Discrete output type: (R1A, R1B, R1C) configurable relay logic NO/NC, electrical durability 100000 cycles
Response time: R2A, R2B R1A, R1B, R1C
Minimum switching current: Configurable relay logic 3 mAat 24 V DC
Maximum switching current: R1, R2 on resistive load, 5 Aat 30 V DC, cos phi = 1, L/R = 0 ms
Maximum switching current: R1, R2 on resistive load, 5 Aat 250 V AC, cos phi = 1, L/R = 0 ms
Maximum switching current: R1, R2 on inductive load, 2 Aat 30 V DC, cos phi = 0.4, L/R = 7 ms
Maximum switching current: R1, R2 on inductive load, 2 Aat 250 V AC, cos phi = 0.4, L/R = 7 ms
Discrete input number: 7
Discrete input type: (PWR) safety input, 24 V DC, voltage limits (LI6) switch-configurable PTC probe, 0...6, impedance 1500 Ohm
Discrete input type: (LI6) switch-configurable, 24 V DC, voltage limits (LI1...LI5) programmable, 24 V DC, voltage limits
Discrete input logic: LI6 (if configured as logic input) positive logic (source), 11 V (state 1)
Discrete input logic: LI6 (if configured as logic input) negative logic (sink), > 16 V (state 0), LI1...LI5 positive logic (source), 11 V (state 1)
Discrete input logic: LI1...LI5 negative logic (sink), > 16 V (state 0),
Acceleration and deceleration ramps: Automatic adaptation of ramp if braking capacity exceeded, by using resistor
Acceleration and deceleration ramps: Linear adjustable separately from 0.01 to 9000 s
Acceleration and deceleration ramps: S, U or customized
Braking to standstill: By DC injection
Protection type: Motor thermal protection
Protection type: Motor power removal
Protection type: Motor motor phase break
Protection type: Drive thermal protection
Protection type: Drive short-circuit between motor phases
Protection type: Drive power removal
Protection type: Drive overvoltages on the DC bus
Protection type: Drive overheating protection
Protection type: Drive overcurrent between output phases and earth
Protection type: Drive line supply undervoltage
Protection type: Drive line supply overvoltage
Protection type: Drive input phase breaks
Protection type: Drive break on the control circuit
Protection type: Drive against input phase loss
Protection type: Drive against exceeding limit speed
Insulation resistance: > 1 mOhm at 500 V DC for 1 minute to earth
Frequency resolution: Display unit 0.1 Hz
Frequency resolution: Analog input 0.024/50 Hz
Type of connector: Male SUB-D 9 on RJ45 CANopen
Type of connector: 1 RJ45 Modbus on terminal
Type of connector: 1 RJ45 Modbus on front face
Physical interface: 2-wire RS 485 Modbus
Transmission frame: RTU Modbus
Transmission rate: 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps CANopen
Transmission rate: 9600 bps, 19200 bps Modbus on front face
Transmission rate: 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps Modbus on terminal
Data format: 8 bits, odd even or no configurable parity Modbus on terminal
Data format: 8 bits, 1 stop, even parity Modbus on front face
Number of addresses: 1...247 Modbus
Number of addresses: 1...127 for CANopen
Method of access: Slave CANopen
Marking: CE
Operating position: Vertical +/- 10 degree
Product weight: 233.69 lb(US) (106 kg)
Width: 14.17 in (360 mm)
Height: 40.24 in (1022 mm)
Depth: 14.84 in (377 mm)

Environment

Noise level: 69.5 dB conforming to 86/188/EEC
Dielectric strength: 5092 V DC between control and power terminals
Dielectric strength: 3535 V DC between earth and power terminals
Electromagnetic compatibility: Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Electromagnetic compatibility: Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 level 3
Electromagnetic compatibility: Electrostatic discharge immunity test conforming to IEC 61000-4-2 level 3
Electromagnetic compatibility: Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 level 4
Electromagnetic compatibility: Conducted radio-frequency immunity test conforming to IEC 61000-4-6 level 3
Standards: EN 55011 class A group 2
Standards: EN 61800-3 environments 1 category C3
Standards: EN 61800-3 environments 2 category C3
Standards: EN/IEC 61800-3
Standards: EN/IEC 61800-5-1
Standards: IEC 60721-3-3 class 3C2
Standards: UL Type 1
Product certifications: CSA
Product certifications: C-Tick
Product certifications: DNV
Product certifications: GOST
Product certifications: NOM 117
Product certifications: UL
Pollution degree: 3 conforming to UL 840
Pollution degree: 3 conforming to EN/IEC 61800-5-1
IP degree of protection: IP30 on the front panel conforming to EN/IEC 61800-5-1
IP degree of protection: IP30 on the front panel conforming to EN/IEC 60529
IP degree of protection: IP30 on side parts conforming to EN/IEC 61800-5-1
IP degree of protection: IP30 on side parts conforming to EN/IEC 60529
IP degree of protection: IP00 conforming to EN/IEC 61800-5-1
IP degree of protection: IP00 conforming to EN/IEC 60529
IP degree of protection: IP54 on lower part conforming to EN/IEC 61800-5-1
IP degree of protection: IP54 on lower part conforming to EN/IEC 60529
IP degree of protection: IP41 on upper part conforming to EN/IEC 61800-5-1
IP degree of protection: IP41 on upper part conforming to EN/IEC 60529
Vibration resistance: 1.5 mm peak to peak (f = 3...10 Hz) conforming to EN/IEC 60068-2-6
Vibration resistance: 0.6 gn (f = 10...200 Hz) conforming to EN/IEC 60068-2-6
Shock resistance: 7 gn 11 ms conforming to EN/IEC 60068-2-27
Relative humidity: 5...95 % without dripping water conforming to IEC 60068-2-3
Relative humidity: 5...95 % without condensation conforming to IEC 60068-2-3
Ambient air temperature for operation: 122...140 °F (50...60 °C) with derating factor
Ambient air temperature for operation: 14...122 °F (-10...50 °C) without derating
Ambient air temperature for storage: -13...158 °F (-25...70 °C)
Operating altitude: 3280.84...9842.52 ft (1000...3000 m) with current derating 1 % per 100 m

Ordering and Shipping Details

Category: 22139 - ATV61 200 THRU 500 HP DRIVES
Discount Schedule: CP4C
GTIN: 00785901525691
Nbr. of units in pkg.: 1
Product availability: Stock - Normally stocked in distribution facility
Returnability: Y
Country of origin: IN

Offer Sustainability

Sustainable offer status: Not Green Premium product
RoHS (date code: YYWW): Compliant - since 1001 -
RoHS (date code: YYWW): Schneider Electric declaration of conformity
REACh: Reference contains SVHC above the threshold -
REACh: Go to CaP for more details
Product environmental profile: Available
Product environmental profile: Download Product Environmental Profile

ATV61HC13N4

Main

Complementary

Environment

Ordering and Shipping Details

Offer Sustainability

Contractual Warranty

Documents

Data Sheet

Related products

VW3A9309

ABL1A01

GV3A03

ABL8MEM24003

LA4DE1U

TCSESU083FN0

ATV312H055M2

DL1BDM3

ZBY02326

NSYTRAB570

TSXAEZ802

LC1K0610B72

60113

171CCC96020

GV7RE100

XBTN200

TSXMFPP224K

LC1D18L7

GV7AE11

ATV32H075N4

Other Categories