206-1204

Variocrimp 4 crimping tool; for insulated and uninsulated ferrules; 24 … 12 AWG

206-1204

Get up to 90 days payment terms from 500+ suppliers
Reselling discounts up to 40%!

€190.00

1

Payment methods:

A total of 4 Parts In-Stock from 11 Distributors

Product Conditions:

New

Availability:: 3 pcs.
In-stock
Supplier Warranty:: 6 months

€190.00for 1 pc..

Updated at 28.09.2024

New Surplus

Availability:: 0 pcs.
On Request

823,80 złfor 1 pc..

Updated at 28.09.2024

Offer with manufacturer lead time

Ships in:On Request

Best price:

€90.76

Additional Information

Part Number: 206-1204
UPC: 4055143868594
Tariff Code: 82032000000

Material Data

Fire load: 0.000 MJ
Weight: 496.600 g

Technical Data

Main product function: Crimping tool

Specifications

Product Group Code: 0014

Commercial Data

Packaging type: Box
Country of origin: DE
GTIN: 4055143868594
Customs tariff number: 82032000000

Notes

Note: Application NotesWith “Variocrimp 4,” the built-in crimping pressure control automatically adjusts force to the conductor cross-section used.Only one crimping station is needed to handle the specified conductor range.Uniform, compact crimping all four sides for high conductor retention.No need to center the ferrules into the terminals.Crimping can be performed from either side (for left- or right-handed users).Built-in ratchet mechanism ensures gas-tight crimp connection.Crimping tools open automatically after crimping operation is complete.Ergonomically designed handles.What is a “gas-tight” connection?In a gas-tight connection, the conductor and the ferrule are compressed, eliminating all spaces. Under normal atmospheric conditions, neither a liquid nor gaseous medium can penetrate the crimped connection.Oxidation between crimped single conductors is prevented, virtually eliminating the possibility of any increase in the crimped connection’s resistance. In some exceptional cases, minute, isolated spaces may be present. However, these instances can be considered as closed off due to the twisted conductor.Inadequate crimping can allow the conductor to be pulled out of the connection. Hollow spaces also remain, permitting oxidation formationand an increase in contact resistance.Elevated resistance is detrimental for both signal transmission (signal flow is damped) and power transmission, resulting in power loss and contact heating (risk of fire).Crimping tools with built-in ratchets are recommended (e.g., WAGO Crimping Tools. These tools open automatically after the crimping operation is complete. Space-saving crimping from all four sides is ideal for spring clamp termination.Ferruled conductor cross-sections specified for WAGO products are based on this crimping method.

Related products

206-1206

Ratchet spring; for 206-1204 Variocrimp 4 and 206-1216 Variocrimp 16 crimping tools

206-1205

Retaining spring; for 206-1204 Variocrimp 4 crimping tool

283-901

2-conductor through terminal block; 16 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 16,00 mm²; gray

285-197

POWER CAGE CLAMP ground terminal block; DIN 35 x 15 rail mount; 2-conductor; 4/0 AWG; 25 mm wide; green-yellow

294-4002

Lighting connector; push-button, external; without ground contact; 2-pole; Lighting side: for solid conductors; Inst. side: for all conductor types; max. 2.5 mm²; Surrounding air temperature: max 85°C (T85); 2,50 mm²; white

734-126

Strain relief plate; for female and male connectors; 35 mm wide; 1 part; Pin spacing 3.5 mm; light gray

210-333/600-078

210-333/600-078

Marking strips; as a DIN A4 sheet; MARKED; PE (1200x); Strip width 6 mm; Strip length 182 mm; Horizontal marking; Self-adhesive; white

231-673

Insulation stop; 0.08-0.2 mm² / 0.2 mm² “s”; white

739-309

PCB terminal block; 1.5 mm²; Pin spacing 3.5 mm; 9-pole; CAGE CLAMP®; 1,50 mm²; gray

284-624

Distribution terminal block; 10 mm²; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; screw-type and CAGE CLAMP®connection; 3 x CAGE CLAMP® connection 10 mm²; 1 x screw-clamp connection 35 mm²; 10,00 mm²; blue

787-2861/108-020

787-2861/108-020

Electronic circuit breaker; 1-channel; 24 VDC input voltage; adjustable 1 … 8 A; Signal contact

231-635/017-000

231-635/017-000

Through-panel PCB terminal strip; angled solder pin 1x1.2 mm; 5-pole; with fixing flanges; pin spacing 5.08 mm / 0.2 in; orange

736-604

Double-deck PCB terminal block; 2.5 mm²; Pin spacing 7.62 mm; 8-pole; CAGE CLAMP®; 2,50 mm²; orange

236-424

PCB terminal block; 2.5 mm²; Pin spacing 5/5.08 mm; 24-pole; CAGE CLAMP®; commoning option; 2,50 mm²; gray

750-1504

16-channel digital output; 24 VDC; 0.5 A

2852-7115

WRF07-P RS-485 Room Control Unit, MODBUS, in-wall, temperature, setpoint

770-1313

Plug; 3-pole; Cod. P; 4,00 mm²; red

890-523

Shield connecting plate; 3-pole; for sockets and plugs; silver-colored

281-998

3-conductor through terminal block; 4 mm²; suitable for Ex e II applications; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 4,00 mm²; light gray

745-302/005-000

745-302/005-000

PCB terminal block; 6 mm²; Pin spacing 7.5 mm; 2-pole; CAGE CLAMP®; commoning option; 6,00 mm²; gray