2216-7114

1 / 4

Part Number: 2216-7114
Tariff Code: 85369010000
UPC: 4066966309652

Get up to 90 days payment terms from 500+ suppliers
Reselling discounts up to 40%!

Send request for price

1

Payment methods:

Request a Quote and we will send you information on availability and price.

Ratings Per Iec/En

Ratings per: IEC/EN 60947-7-1
Nominal voltage (III/3): 250 V
Rated impulse voltage (III/3): 4 kV
Rated current: 76 A
Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3

Environmental Requirements

Processing temperature: -35 … +60 °C
Continuous operating temperature: -60 … +105 °C

Physical Data

Width: 12 mm / 0.472 inches
Height: 69.4 mm / 2.732 inches
Depth from upper-edge of DIN-rail: 38.1 mm / 1.5 inches

Material Data

Note (material data): <a href="https://www.wago.com/us/material-specifications" href="_blank">Information on material specifications can be found here</a>
Color: Blue
Material group: I
Insulation material: Polyamide (PA66)
Flammability class per UL94: V0
Fire load: 0.411 MJ
Weight: 25.529 g

Mechanical Data

Mounting type: DIN-35 rail
Marking level: Center/side marking

Specifications

Product Group Code: 0036

Commercial Data

Country of origin: PL
GTIN: 4066966309652
Customs tariff number: 85369010000

Power Loss

Power loss, per pole (potential): 2.4259 W
Rated current IN for specified power loss: 69 A

Connection 1

Connection technology: Push-in CAGE CLAMP®
Actuation type: Push-button
Connectable conductor materials: Copper
Nominal cross-section: 16 mm²
Solid conductor: 0.5 … 16 mm² / 20 … 6 AWG
Solid conductor; push-in termination: 6 … 16 mm² / 14 … 6 AWG
Fine-stranded conductor: 0.5 … 25 mm² / 20 … 4 AWG
Fine-stranded conductor; with insulated ferrule: 0.5 … 16 mm² / 20 … 6 AWG
Fine-stranded conductor; with ferrule; push-in termination: 6 … 16 mm² / 10 … 6 AWG
Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
Strip length: 18 … 20 mm / 0.71 … 0.79 inches
Wiring direction: Front-entry wiring

Related products

283-901

2-conductor through terminal block; 16 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 16,00 mm²; gray

285-197

POWER CAGE CLAMP ground terminal block; DIN 35 x 15 rail mount; 2-conductor; 4/0 AWG; 25 mm wide; green-yellow

294-4002

Lighting connector; push-button, external; without ground contact; 2-pole; Lighting side: for solid conductors; Inst. side: for all conductor types; max. 2.5 mm²; Surrounding air temperature: max 85°C (T85); 2,50 mm²; white

734-126

Strain relief plate; for female and male connectors; 35 mm wide; 1 part; Pin spacing 3.5 mm; light gray

210-333/600-078

210-333/600-078

Marking strips; as a DIN A4 sheet; MARKED; PE (1200x); Strip width 6 mm; Strip length 182 mm; Horizontal marking; Self-adhesive; white

231-673

Insulation stop; 0.08-0.2 mm² / 0.2 mm² “s”; white

739-309

PCB terminal block; 1.5 mm²; Pin spacing 3.5 mm; 9-pole; CAGE CLAMP®; 1,50 mm²; gray

284-624

Distribution terminal block; 10 mm²; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; screw-type and CAGE CLAMP®connection; 3 x CAGE CLAMP® connection 10 mm²; 1 x screw-clamp connection 35 mm²; 10,00 mm²; blue

787-2861/108-020

787-2861/108-020

Electronic circuit breaker; 1-channel; 24 VDC input voltage; adjustable 1 … 8 A; Signal contact

231-635/017-000

231-635/017-000

Through-panel PCB terminal strip; angled solder pin 1x1.2 mm; 5-pole; with fixing flanges; pin spacing 5.08 mm / 0.2 in; orange

736-604

Double-deck PCB terminal block; 2.5 mm²; Pin spacing 7.62 mm; 8-pole; CAGE CLAMP®; 2,50 mm²; orange

236-424

PCB terminal block; 2.5 mm²; Pin spacing 5/5.08 mm; 24-pole; CAGE CLAMP®; commoning option; 2,50 mm²; gray

750-1504

16-channel digital output; 24 VDC; 0.5 A

2852-7115

WRF07-P RS-485 Room Control Unit, MODBUS, in-wall, temperature, setpoint

770-1313

Plug; 3-pole; Cod. P; 4,00 mm²; red

890-523

Shield connecting plate; 3-pole; for sockets and plugs; silver-colored

281-998

3-conductor through terminal block; 4 mm²; suitable for Ex e II applications; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 4,00 mm²; light gray

745-302/005-000

745-302/005-000

PCB terminal block; 6 mm²; Pin spacing 7.5 mm; 2-pole; CAGE CLAMP®; commoning option; 6,00 mm²; gray

770-680

Mounting plate; for distribution boxes; gray

261-327

Space-saving, 2-conductor end terminal block; without push-buttons; without protruding snap-in mounting foot; 1-pole; for terminal strips with snap-in mounting feet; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; green-yellow