750-666/000-004

1 / 2

Part Number: 750-666/000-004
Tariff Code: 85371098990
UPC: 4066966333879

Get up to 90 days payment terms from 500+ suppliers
Reselling discounts up to 40%!

Send request for price

1

Payment methods:

Request a Quote and we will send you information on availability and price.

Environmental Requirements

Ambient temperature (operation): 0 … +55 °C
Ambient temperature (storage): -25 … +85 °C
Protection type: IP20
Pollution degree: 2 per IEC 61131-2
Operating altitude: 0 … 2000 m / 0 … 6562 ft
Mounting position: Horizontal (standing/lying); vertical
Relative humidity (without condensation): 95 %
Vibration resistance: 4g per IEC 60068-2-6
Shock resistance: 15g per IEC 60068-2-27
EMC immunity to interference: Per EN 61000-6-2, marine applications, EN 61000-6-7 (FS)
EMC emission of interference: Per EN 61000-6-3, -4; marine applications
Exposure to pollutants: Per IEC 60068-2-42 and IEC 60068-2-43
Permissible H2S contaminant concentration at a relative humidity 75 %: 10 ppm
Permissible SO2 contaminant concentration at a relative humidity 75 %: 25 ppm

Connection Data

Connection technology: inputs/outputs: 16 x CAGE CLAMP®
Connection type 1: Inputs/outputs
Solid conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
Strip length: 8 … 9 mm / 0.31 … 0.35 inches

Physical Data

Width: 24 mm / 0.945 inches
Height: 100 mm / 3.937 inches
Depth: 67.8 mm / 2.669 inches
Depth from upper-edge of DIN-rail: 60.6 mm / 2.386 inches

Material Data

Housing material: Polycarbonate; polyamide 6.6
Fire load: 1.985 MJ
Weight: 96.825 g
Conformity marking: CE

Functional Safety

Achievable safety classes: SIL 3; Category 4, PLe (two-channel); SIL 2; Category 2; PLd (one-channel)
Safety standards: IEC 61508-1 … -7; EN ISO 13849-1; EN 62061
Interface types according to ZVEI (inputs): Drain; A, C0, C1, C2, C3
Interface types according to ZVEI (outputs): Source; C0, C1, C2, C3, D0, D1, D2, D3
Test pulse duration (max.): 500 ms
Test pulse duration (min.): 0 ms

Technical Data

Number of digital inputs: 4
Number of digital outputs: 2
Total number of channels (module): 6
Signal type: Digital
Signal type (voltage): 24 VDC
Sensor connection: 4 x (Fail-safe input with test pulse)
Actuator connection: 2 x (fail-safe output with test pulse)
Input characteristic: Clock sensitive || Type 1 per IEC 61131
Input current per channel for signal (1) typ.: 3.0 mA
Output circuit design: Power outputs
Output current per channel: 10 A
Output current (module): 20 A
Output current: Short-circuit-protected
Switching frequency (max.): 50 Hz; Resistive load
Switching frequency (max.) (2): 0.1 Hz; Inductive load
Switching frequency (max.) (3): 0.1 Hz; Capacitive load
Signal frequency (max.): 50 Hz
Load type of switching frequency: Resistive load
Configuration options: PROFIsafe address adjustable via DIP switch or engineering software
Supply voltage (system): 5 VDC; via data contacts
Current consumption (5 V system supply): 120 mA
Supply voltage (field): 24 VSELV/PELV DC (-25 … +30 %); via power jumper contacts (power supply via blade contact)
Current consumption, field supply (module with no external load): 30 mA
Indicators: LED (A-D) green/red: Status/Error I1 … I4; LED (I-K) green/red: Status/error O1 … O2; LED (E) red: Group error; LED (F-H) green/red: Diagnostics
Number of incoming power jumper contacts: 2
Number of outgoing power jumper contacts: 2
Current carrying capacity (power jumper contacts): 10 A

Mechanical Data

Mounting type: DIN-35 rail
Pluggable connector: Fixed

Specifications

Product Group Code: 0015

Commercial Data

Country of origin: DE
GTIN: 4066966333879
Customs tariff number: 85371098990

Related products

283-901

2-conductor through terminal block; 16 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 16,00 mm²; gray

285-197

POWER CAGE CLAMP ground terminal block; DIN 35 x 15 rail mount; 2-conductor; 4/0 AWG; 25 mm wide; green-yellow

294-4002

Lighting connector; push-button, external; without ground contact; 2-pole; Lighting side: for solid conductors; Inst. side: for all conductor types; max. 2.5 mm²; Surrounding air temperature: max 85°C (T85); 2,50 mm²; white

734-126

Strain relief plate; for female and male connectors; 35 mm wide; 1 part; Pin spacing 3.5 mm; light gray

210-333/600-078

210-333/600-078

Marking strips; as a DIN A4 sheet; MARKED; PE (1200x); Strip width 6 mm; Strip length 182 mm; Horizontal marking; Self-adhesive; white

231-673

Insulation stop; 0.08-0.2 mm² / 0.2 mm² “s”; white

739-309

PCB terminal block; 1.5 mm²; Pin spacing 3.5 mm; 9-pole; CAGE CLAMP®; 1,50 mm²; gray

284-624

Distribution terminal block; 10 mm²; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; screw-type and CAGE CLAMP®connection; 3 x CAGE CLAMP® connection 10 mm²; 1 x screw-clamp connection 35 mm²; 10,00 mm²; blue

787-2861/108-020

787-2861/108-020

Electronic circuit breaker; 1-channel; 24 VDC input voltage; adjustable 1 … 8 A; Signal contact

231-635/017-000

231-635/017-000

Through-panel PCB terminal strip; angled solder pin 1x1.2 mm; 5-pole; with fixing flanges; pin spacing 5.08 mm / 0.2 in; orange

736-604

Double-deck PCB terminal block; 2.5 mm²; Pin spacing 7.62 mm; 8-pole; CAGE CLAMP®; 2,50 mm²; orange

236-424

PCB terminal block; 2.5 mm²; Pin spacing 5/5.08 mm; 24-pole; CAGE CLAMP®; commoning option; 2,50 mm²; gray

750-1504

16-channel digital output; 24 VDC; 0.5 A

2852-7115

WRF07-P RS-485 Room Control Unit, MODBUS, in-wall, temperature, setpoint

770-1313

Plug; 3-pole; Cod. P; 4,00 mm²; red

890-523

Shield connecting plate; 3-pole; for sockets and plugs; silver-colored

281-998

3-conductor through terminal block; 4 mm²; suitable for Ex e II applications; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 4,00 mm²; light gray

745-302/005-000

745-302/005-000

PCB terminal block; 6 mm²; Pin spacing 7.5 mm; 2-pole; CAGE CLAMP®; commoning option; 6,00 mm²; gray

770-680

Mounting plate; for distribution boxes; gray

261-327

Space-saving, 2-conductor end terminal block; without push-buttons; without protruding snap-in mounting foot; 1-pole; for terminal strips with snap-in mounting feet; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; green-yellow