773-116

Additional Information

Part Number

773-116

UPC

4055143237550

Tariff Code

85369010000

ETIM

Group Code : EG000047

Group Description : Installation, isolation and connection material

Class Description : Screw less terminal

Class Code : EC000446

Version : 7

Ratings Per Iec/En

Ratings per

IEC/EN 60664-1

Nominal voltage (II/2)

400 V

Rated surge voltage (II/2)

4 kV

Rated current

24 A

Legend (ratings)

(II / 2) ≙ Overvoltage category II / Pollution degree 2

Environmental Requirements

Continuous operating temperature

105 °C

Physical Data

Width

18.8 mm / 0.74 inches

Height

13.1 mm / 0.516 inches

Depth

19.5 mm / 0.768 inches

Material Data

Note (material data)

<a href="https://www.wago.com/us/material-specifications" href="_blank">Information on material specifications can be found here</a>

Color

Multicoloured

Cover color

Green

Flammability class per UL94

V2

Fire load

0.076 MJ

Weight

3.540 g

Specifications

Product Group Code

0007

Commercial Data

Packaging type

Box

Country of origin

CN

GTIN

4055143237550

Customs tariff number

85369010000

Notes

Safety information

In grounded power lines

Connection 1

Connection technology

PUSH WIRE®

Actuation type

Push-in

Connectable conductor materials

Copper || Aluminum

Connectable conductor materials (note)

Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste <a href="https://www.wago.com/249-130">249-130</a> is used for termination.“Alu-Plus” Contact Paste Advantages:Automatically destroys the oxide film during clamping.Prevents fresh oxidation at the clamping point.Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).Provides long-term protection against corrosion.For spring clamp connections with PUSH WIRE® connection technology, WAGO recommends that the aluminum conductor first be cleaned and then immediately inserted into the clamping unit filled with “Alu-Plus” contact paste.It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::2.5 mm² = 16 A4 mm² = 22 A

Solid conductor

0.75 … 2.5 mm² / 18 … 12 AWG

Stranded conductor

1.5 … 2.5 mm² / 16 … 12 AWG

Strip length

12 mm / 0.47 inches

Wiring direction

Side-entry wiring