787-1601

1 / 2

Part Number: 787-1601
Tariff Code: 85044082900
UPC: 4055143060400

ETIM

Group Code : EG000017

Group Description : Low-voltage Industrial Components

Class Description : DC-power supply

Class Code : EC002540

Version : 7

£87.88

net

1

Payment methods:

Best offer from:: Trusted Automa.Net Supplier
Availability:: 2 pcs.
In-Stock
Updated at: 21-11-2024
Estimated Delivery:: On Request
Condition:: New Surplus

New Surplus - A new, unused, undamaged item without a manufacturer guarantee. The item may come without original packaging or in replacement packaging. If provided, the box may have been opened.

Shipping Information

Secure Payment Process

Return & Refund Policies

Shipping Policies

Warranty Policies

Safety And Protection

Isolation voltage (pri.-sec.): DC 4.242 kV
Protection class: II
Protection type: IP20; per EN 60529
Resistance to reverse feed: ≤ DC 25 V
Overvoltage category: II
Pollution degree: 2
Transient suppression (primary): Varistor
Overvoltage protection; secondary: Internal protective circuit || ≤ 35 VDC (in the event of a fault)
Short-circuit-protected: Yes
Open-circuit-proof: Yes
Parallel operation: Yes
Series operation: Yes
MTBF: > 500,000 h (per IEC 61709)

Environmental Requirements

Ambient temperature (operation): -25 … +70 °C (Device starts at −40 °C (type-tested))
Ambient temperature (storage): -25 … +85 °C
Relative humidity: 5 … 96 % (no condensation permissible)
Derating: -3 %/K (> 50 °C)

Connection Data

Connection type 1: Input/output/signaling
Connection technology: CAGE CLAMP®
WAGO connector: WAGO 721 Series
Solid conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
Strip length: 8 … 9 mm / 0.31 … 0.35 inches

Signaling And Communication

Signaling: 1 x LED DC OK (green) || 1 x Active signal output DC OK (12 VDC; 40 mA)
Operation status indicator: Green LED (Uo)

Physical Data

Width: 22.5 mm / 0.886 inches
Height: 90 mm / 3.543 inches
Depth from upper-edge of DIN-rail: 107.5 mm / 4.232 inches

Material Data

Fire load: 0.000 MJ
Weight: 128.000 g

Input

Phases: 1
Nominal input voltage Ui nom: 1 x AC 100 … 240 V
Input voltage range: 1 x AC 85 … 264 V; DC 120 … 300 V
Input voltage derating: -2.5 %/V (< 95 VAC)
Nominal mains frequency range: 44 … 66 Hz; 0 Hz
Input current Ii: ≤ 0.29 A (240 VAC); ≤ 0.5 A (100 VAC)
Discharge current: ≤ 0.25 mA
Inrush current: ≤ 30 A
Power factor correction (PFC): Passive
Mains failure hold-up time: ≥ 120 ms (230 VAC); ≥ 15 ms (100 VAC)

Output

Nominal output voltage Uo nom: DC 12 V (SELV)
Output voltage range: DC 11.5 … 14.5 V (adjustable)
Default setting: DC 12 V
Nominal output current Io nom: 2 A (12 VDC); 2.1 A (< 40 °C)
Nominal output power: 24 W
Deviation: ≤ 1 %
Residual ripple: ≤ 20 mV (peak-to-peak)
Current limitation: 1.1 x Io nom (typ.)
Overload behavior: Constant current

Standards And Specifications

Conformity marking: CE
Standards/specifications: EN 61010-1 || EN 61010-2-201 || EN 61204-3 || EN 60335-1 || UL 60950-1 || UL 508 || DNV || SEMI F47

Mechanical Data

Mounting type: DIN-35 rail

Specifications

Product Group Code: 0006

Commercial Data

Packaging type: Box
Country of origin: DE
GTIN: 4055143060400
Customs tariff number: 85044083900

Efficiency/Power Losses

Power loss Pl: ≤ 0.7 W; ≤ 5.3 W (230 VAC; nominal load)
Power loss (max.) Pl (max.): 5.7 W (100 VAC / 12 VDC; 2 A)
Efficiency (typ.): 82 %

<B>Circuit Protection</B>

Internal fuse: T 2 A / 250 VAC
Backup fusing (required): An external DC fuse is required for the DC input voltage.
Backup fusing (recommended): Circuit breaker: 6 A, 10 A, 16 A; Tripping characteristic: B or C

Related products

210-831

Marking strips; on reel; 2.3 mm wide; plain; Self-adhesive; white

2009-110

Marking strips; for Smart Printer; on reel; not stretchable; plain; snap-on type; white

210-769

SCREWDRIVER; green

210-832

Marking strips; on reel; 3 mm wide; plain; Self-adhesive; white

210-720

Operating tool; Blade: 3.5 x 0.5 mm; with a partially insulated shaft; multicoloured

793-501

WMB marking card; as card; not stretchable; plain; snap-on type; white

793-5501

WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on type; white

2009-115

WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; white

283-901

2-conductor through terminal block; 16 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 16,00 mm²; gray

285-197

POWER CAGE CLAMP ground terminal block; DIN 35 x 15 rail mount; 2-conductor; 4/0 AWG; 25 mm wide; green-yellow

294-4002

Lighting connector; push-button, external; without ground contact; 2-pole; Lighting side: for solid conductors; Inst. side: for all conductor types; max. 2.5 mm²; Surrounding air temperature: max 85°C (T85); 2,50 mm²; white

734-126

Strain relief plate; for female and male connectors; 35 mm wide; 1 part; Pin spacing 3.5 mm; light gray

210-333/600-078

210-333/600-078

Marking strips; as a DIN A4 sheet; MARKED; PE (1200x); Strip width 6 mm; Strip length 182 mm; Horizontal marking; Self-adhesive; white

231-673

Insulation stop; 0.08-0.2 mm² / 0.2 mm² “s”; white

739-309

PCB terminal block; 1.5 mm²; Pin spacing 3.5 mm; 9-pole; CAGE CLAMP®; 1,50 mm²; gray

284-624

Distribution terminal block; 10 mm²; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; screw-type and CAGE CLAMP®connection; 3 x CAGE CLAMP® connection 10 mm²; 1 x screw-clamp connection 35 mm²; 10,00 mm²; blue

787-2861/108-020

787-2861/108-020

Electronic circuit breaker; 1-channel; 24 VDC input voltage; adjustable 1 … 8 A; Signal contact

231-635/017-000

231-635/017-000

Through-panel PCB terminal strip; angled solder pin 1x1.2 mm; 5-pole; with fixing flanges; pin spacing 5.08 mm / 0.2 in; orange

736-604

Double-deck PCB terminal block; 2.5 mm²; Pin spacing 7.62 mm; 8-pole; CAGE CLAMP®; 2,50 mm²; orange

236-424

PCB terminal block; 2.5 mm²; Pin spacing 5/5.08 mm; 24-pole; CAGE CLAMP®; commoning option; 2,50 mm²; gray