Wago
787-3861/800-000
1 / 1
- Part Number
- 787-3861/800-000
- UPC
- 4066966363395
Payment methods:
- Best offer from:
Trusted Automa.Net Supplier- Availability:
- 4 pcs.In-StockUpdated at: 21-11-2024
- Estimated Delivery:
- On Request
- Condition:
- New Surplus
New Surplus - A new, unused, undamaged item without a manufacturer guarantee. The item may come without original packaging or in replacement packaging. If provided, the box may have been opened.
Shipping Information
Secure Payment Process
Return & Refund Policies
Shipping Policies
Warranty Policies
Safety And Protection
- Isolation voltage (connectors – housing)
- DC 1.5 kV
- Protection class
- III
- Protection type
- IP20; per EN 60529
- Reverse voltage protection
- No
- Overvoltage category
- II
- Pollution degree
- 2
- Transient suppression (primary)
- Suppressor diode (33 V)
- Parallel operation of single channels
- Not permitted
- Series operation
- No
- MTBF
- 1.168.394 h
Environmental Requirements
- Ambient temperature (operation)
- -25 … +70 °C
- Ambient temperature (storage)
- -40 … +85 °C
- Relative humidity
- 10 … 95 % (no condensation permissible)
- Derating
- No derating
- Operating altitude
- ≤ 2000 m (a.s.l.)
Connection Data
- Number of jumper slots
- 8
- Connection technology
- Push-in CAGE CLAMP®
- WAGO connector
- WAGO 857 Series
- Solid conductor
- 0.08 … 2.5 mm² / 26 … 14 AWG
- Fine-stranded conductor
- 0.34 … 2.5 mm² / 22 … 14 AWG
- Strip length
- 9 … 10 mm / 0.35 … 0.39 inches
- Note (conductor cross-section)
- Depending on the output current, use the conductor cross-sections tested and approved by UL: 26 … 14 AWG (0.5 A);16 … 14 AWG (8 A)
Signaling And Communication
- Signaling
- 1 x Status LED (green/yellow/red) || 1 x Signal output (18 … 30 VDC, max. 0.015 A), Default setting: triggered
- Operation status indicator
- Green LED (channel OK) || Red LED (channel switched off)
- Remote input
- 1 x Control input (15 … 30 VDC (active high); -3 … 5 VDC (active low); max. 0.015 A)
Physical Data
- Width
- 6 mm / 0.236 inches
- Height from upper-edge of DIN-rail
- 97.8 mm / 3.85 inches
- Depth
- 94 mm / 3.701 inches
Material Data
- Fire load
- 0.631 MJ
- Weight
- 55.616 g
Input
- Nominal input voltage Ui nom
- DC 24 V
- Input voltage range
- DC 18 … 30 V(SELV)
Output
- Total number of channels (module)
- 1
- Nominal output voltage Uo nom
- 1 x DC 24 V
- Output voltage range
- DC 18 … 30 V (Ue − voltage drop)
- Voltage drop
- ≤ 240 mV
- Nominal output current Io nom
- 1 x 8 A (fixed setting)
- Default setting
- ; switched off
- Switch-on capacity
- > 50000 µF (see instruction manual)
- Switch-on behavior
- Time-delayed channel switching (load-dependent, min. 0 ms/max. 500 ms)
Standards And Specifications
- Conformity marking
- CE; UKCA
- Standards/specifications
- EN 61000-6-2 || EN 61000-6-3 || UL 61010-2-201 || DNV || UL 2367
Mechanical Data
- Mounting type
- DIN-35 rail
Specifications
- Product Group Code
- 0006
Commercial Data
- Country of origin
- IN
- GTIN
- 4066966363395
Notes
- Note
- The device is designed for use in SELV circuits. Depending on the output current, please use the approved minimum conductor cross-sections: 26 AWG (0.5 A); 16 AWG (8 A)
Efficiency/Power Losses
- Power loss Pl
- ≤ 0.4 W (no load)
- Efficiency (typ.)
- 98 %
<B>Circuit Protection</B>
- Internal fuse
- T 10 A
Related products
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther