Bosch Rexroth Industrial Automation Spare Parts

Flow Rack Lean - Material supply in the supermarket or directly at the workstation - Selection of various conveyor media allows for maximum flexibility and diverse combination options: Rollers, roller elements and slide rails - Colored rollers provide visual indicators to identify inventories or good/reject parts - Available as ESD-conductive version - Design: Fully assembled or as a kit - Allows for the addition of any desired modules, including cross ties and conveyor tracks as well as individual components

Conveyor track Lean with rail holder, multi-color rollers - Aluminum U-profile conveyor track - Conveyor media for every requirement:– rollers with or without roller flange. 4 colors serve for visualization of supply (kanban) or from good/reject parts.– Roller elements with and without roller flange (RE45, RE45SK)– Slide rails with or without integrated lateral guide (GS, GSSK) - Rail holders for suspending to tubular cross tie - Available as ESD-conductive version (U-profile: aluminum plain)

The drive kit is designed to operate the basic head drive/connection drive units and the return unit (closed drive). The drive kit contains a flange for attaching the motor to the basic unit, a hexagonal shaft for transmission of force, as well as other optional equipment features. - Versions in aluminum (SP = AL) or stainless steel (SP = STS) - For SP = AL, with adjustable ball catch coupling (Kpg = 1) or without (Kpg = 0). The adjustable ball catch coupling is protected and integrated in the flange to save space and does not serve personal protection. Preset to maximum chain tensile force at the factory - With Lenze gear motor (GM = 1, without surface and corrosion protection) or with an interface for attaching an SEW SA47 gear motor (GM = 2). In order to ensure a compact installation situation, smaller and lighter gear motors (GM=3) or an interface for the installation of an SEW SA37 gear motor (GM=4) are available for applications with low load. An adaptation by the customer is required for attaching other gear motors (GM = 0), - Fixed or adjustable speed (vN). For an adjustable speed, gear motors must be retrofitted with an FU (frequency converter) - Connections are made using terminal boxes (AT = K) or plugs (AT = S)

Flow Rack EcoFlow - Material supply in the supermarket or directly at the workstation - For heavy loads - Full-width rollers for the transport and supply of blister packs or cardboard boxes - Available as ESD-conductive version - Design: Fully assembled or as a kit for self-assembly - Allows for the addition of any desired modules, including cross ties and conveyor tracks as well as individual components

Conveyor track Lean with stop plate, roller elements - Aluminum U-profile conveyor track - Conveyor media for every requirement:– rollers with or without roller flange. 4 colors serve for visualization of supply (kanban) or from good/reject parts.– Roller elements with and without roller flange (RE45, RE45SK)– Slide rails with or without integrated lateral guide (GS, GSSK) - Applications include the manual linking of workstations - Available as ESD-conductive version (U-profile: aluminum plain)

Conveyor track Lean with stop plate, multi-color rollers - Aluminum U-profile conveyor track - Conveyor media for every requirement:– rollers with or without roller flange. 4 colors serve for visualization of supply (kanban) or from good/reject parts.– Roller elements with and without roller flange (RE45, RE45SK)– Slide rails with or without integrated lateral guide (GS, GSSK) - Applications include the manual linking of workstations - Available as ESD-conductive version (U-profile: aluminum plain)

Conveyor track Lean with rail holder, slide rails - Aluminum U-profile conveyor track - Conveyor media for every requirement:– rollers with or without roller flange. 4 colors serve for visualization of supply (kanban) or from good/reject parts.– Roller elements with and without roller flange (RE45, RE45SK)– Slide rails with or without integrated lateral guide (GS, GSSK) - Rail holders for suspending to tubular cross tie - Available as ESD-conductive version (U-profile: aluminum plain)

Conveyor track Lean with stop plate, single-color rollers - Aluminum U-profile conveyor track - Conveyor media for every requirement:– rollers with or without roller flange. 4 colors serve for visualization of supply (kanban) or from good/reject parts.– Roller elements with and without roller flange (RE45, RE45SK)– Slide rails with or without integrated lateral guide (GS, GSSK) - Applications include the manual linking of workstations - Available as ESD-conductive version (U-profile: aluminum plain)

Conveyor track Lean with rail holder, roller elements - Aluminum U-profile conveyor track - Conveyor media for every requirement:– rollers with or without roller flange. 4 colors serve for visualization of supply (kanban) or from good/reject parts.– Roller elements with and without roller flange (RE45, RE45SK)– Slide rails with or without integrated lateral guide (GS, GSSK) - Rail holders for suspending to tubular cross tie - Available as ESD-conductive version (U-profile: aluminum plain)

Lift positioning unit HP 1/P h=0-50mm - Can be used with workpiece pallets WT 1/P - Positioning via the HP 1/P positioning pins and the positioning bushings on the WT 1/P workpiece pallet - Permissible vertical process force up to 400 N incl. WT 1/P. The positioning plate of the HP 1/P supports the WT 1/P on its carrying plate during this process. - Repeat accuracy in X- and Y-direction: ± 0.025 mm - Fixed stop for pre-positioning the arriving workpiece pallet. Can be replaced with a damper DA 1/B if necessary. - With the HP 1/P in the version with variable lift, the lifting height above conveying level is max. 50 mm. The lifting height is infinitely variable. - The version with a fixed lifting height 15 mm above the conveying level has an extremely low installation height. It is therefore particularly suited for use on manual workstations without restricting the legroom. - The HP 1/P has three positions:- Bottom position: WT on the section are let through.- Center position: WT are stopped on the section (by integrated fixed stop or optional damper DA 1/B). The center position can be approached from the bottom and the top position.

Lift positioning unit HP 1/P h=15mm - Can be used with workpiece pallets WT 1/P - Positioning via the HP 1/P positioning pins and the positioning bushings on the WT 1/P workpiece pallet - Permissible vertical process force up to 400 N incl. WT 1/P. The positioning plate of the HP 1/P supports the WT 1/P on its carrying plate during this process. - Repeat accuracy in X- and Y-direction: ± 0.025 mm - Fixed stop for pre-positioning the arriving workpiece pallet. Can be replaced with a damper DA 1/B if necessary. - With the HP 1/P in the version with variable lift, the lifting height above conveying level is max. 50 mm. The lifting height is infinitely variable. - The version with a fixed lifting height 15 mm above the conveying level has an extremely low installation height. It is therefore particularly suited for use on manual workstations without restricting the legroom. - The HP 1/P has three positions:- Bottom position: WT on the section are let through.- Center position: WT are stopped on the section (by integrated fixed stop or optional damper DA 1/B). The center position can be approached from the bottom and the top position.

Complete axis LF6S - Fully assembled cam roller guide - Stroke and trolley length can be individually selected - Rail profile screwed onto strut profile 45x60 - Incl. toothed belt drive

Complete axis LF6C - Fully assembled cam roller guide - Stroke can be individually selected - Clamping profile clipped into strut profile 45x90L - Incl. toothed belt drive

Conveyor track Lean with stop plate, slide rails - Aluminum U-profile conveyor track - Conveyor media for every requirement:– rollers with or without roller flange. 4 colors serve for visualization of supply (kanban) or from good/reject parts.– Roller elements with and without roller flange (RE45, RE45SK)– Slide rails with or without integrated lateral guide (GS, GSSK) - Applications include the manual linking of workstations - Available as ESD-conductive version (U-profile: aluminum plain)

Complete axis LF12S - Fully assembled cam roller guide - Stroke and trolley length can be individually selected - Rail profile screwed onto strut profile 90x90L - Incl. toothed belt drive

Complete axis LF12C - Fully assembled cam roller guide - Stroke can be individually selected - Clamping profile clipped into strut profile 90x90 - Incl. toothed belt drive

VE 5/D-300 stop gate - Damped stopping of one or more accumulating workpiece pallets at the defined workpiece pallet stop surfaces. - Pneumatic stop gate with steplessly adjustable damping. When the pressure is released the stop gate is closed by a spring and the workpiece pallet is stopped. - Compressed air connection: 5 ... 6 bar - Pneumatic connection, pushlock Ø 6 mm

VE 5/200 stop gate - Stopping one or more accumulating workpiece pallets at the defined workpiece pallet stop surface. - Pneumatic stop gate. When the pressure is released the stop gate is closed by a spring and the workpiece pallet is stopped. - Compressed air connection: 5 ... 6 bar - Pneumatic push-in fitting: 6 mm

Complete axis LF20S - Fully assembled cam roller guide - Stroke and trolley length can be individually selected - Rail profile mounted on strut profile 90x180 - Incl. toothed belt drive

Complete axis LF20C - Fully assembled cam roller guide - Stroke can be individually selected - Clamping profile clipped into strut profile 90x180 - Incl. toothed belt drive