Bosch Rexroth Industrial Automation Spare Parts

WT 2/H 12.7 workpiece pallet - Workpiece pallet for especially high maximum permitted overall weight of up to 240 kg (2 kg/cm length) combined with accumulation roller chain conveyor medium - Fully assembled or as a kit for self-assembly - PE wear pads for quiet operation and low wear - Integrated stop damper, ensures quiet running onto other workpiece pallets - 17 standard sizes - For workpiece pallet dimensions bWT x lWT = 400 x 400 mm to 1200 x 1200 mm - Special dimensions on request - Universal aluminum carrying plate with two carrying plate thicknesses:d = 12.70 mmd = 19.05 mm - Suitable for use in an EPA - Material:- Aluminum carrying plate- Corner module and slider with PE (= polyethylene) wear pad

Dampened stopping of the first accumulating workpiece pallet VE 2/D250-H Stop Gate - Pneumatic stop gate - For central separation of WT 2/H and WT 2/F-H workpiece pallets - Suitable for accumulation loads up to 2250 kg - Infinitely adjustable damping - Optimal damping for total weights up to 250 kg - Can be combined with WT 22/H and WT 2/F-H - Notice: Combination with WT 2/LS not possible - The stop gate stops one or more accumulating workpiece pallets at the defined workpiece pallet stop surface - For central separation, the stop gate is mounted inside the tracks on the conveyor section using the supplied cross connectors - When the pressure is released, the stop gate is held in the lock position by a spring and the workpiece pallet is stopped

WT 2/H 19.05 workpiece pallet - Workpiece pallet for especially high maximum permitted overall weight of up to 240 kg (2 kg/cm length) combined with accumulation roller chain conveyor medium - Fully assembled or as a kit for self-assembly - PE wear pads for quiet operation and low wear - Integrated stop damper, ensures quiet running onto other workpiece pallets - 17 standard sizes - For workpiece pallet dimensions bWT x lWT = 400 x 400 mm to 1200 x 1200 mm - Special dimensions on request - Universal aluminum carrying plate with two carrying plate thicknesses:d = 12.70 mmd = 19.05 mm - Suitable for use in an EPA - Material:- Aluminum carrying plate- Corner module and slider with PE (= polyethylene) wear pad

WT 2/H Workpiece Pallet Kit - Workpiece pallet kit without carrying plate for self-assembly kit or for adaptation to specific customer requirements - PE wear pads for quiet operation and low wear - Integrated stop damper, ensures quiet running onto other workpiece pallets - 17 standard sizes - For workpiece pallet dimensions bWT x lWT = 400 x 400 mm to 1200 x 1200 mm - Special dimensions on request - Suitable for use in an EPA - Material: PE (polyethylene) wear pad

Connection kit alpine conveyor AC - With the alpine conveyor connection kit, an alpine conveyor in the sizes 65 mm or 90 mm can be easily mounted by combining several basic units of curve wheel drive AL

Connection kit synchronous drive VFplus internal motor - The connection kit for a synchronous drive is used to synchronously drive two conveyor sections with only one motor

VE 5/D-1000 stop gate - Please note that in the limit ranges of the permissible weight/speed combinations, the damping behavior may not be optimal. - Oil-damped stopping of one or more accumulating workpiece pallets at the defined workpiece pallet stop surface. - Pneumatic stop gate. When the pressure is released the stop gate is closed by a spring and the workpiece pallet is stopped. - Compressed air connection: 5 ... 6 bar - Pneumatic connection, pushlock Ø 6 mm

VE 5/OCD-1000 stop gate - Please note that in the limit ranges of the permissible weight/speed combinations, the damping behavior may not be optimal. - Oil-damped stopping of one or more accumulating workpiece pallets at the defined workpiece pallet stop surface. - Pneumatic stop gate. When the pressure is released the stop gate is closed by a spring and the workpiece pallet is stopped. - Compressed air connection: 5 ... 6 bar - Pneumatic connection, pushlock Ø 6 mm - Installation location AO = 1: ST 5/OC; AS 5/OC; PE 5/OC; PE 5/OC-T - Installation location AO = 2: PE 5/OC; PE 5/OC-T (b = 455; lT = 455) - Installation location AO = 3: PE 5/OC (b = 455; lT = 650) - Installation location AO = 4: PE 5/OC-T (lT = 455; b = 650)

VA 2/D-250 Slide Stop Slide stop, can be lowered pneumatically, damped stop only for use with HQ 2/C-H - Slide stop; can be lowered pneumatically, dampened stop, for use with HQ 2/C-H (minimum transverse width from bQ = 480 mm, minimum width lengthwise from bL = 640 mm) - Stopping on the inside of the WT frame module - Infinitely adjustable damping - When the pressure is released by a spring into the lock position - Can be combined with WT 22/H and WT 2/F-H - Notice: Combination with WT 2/LS not possible - The slide stop is used in a transverse section that connects more than two longitudinal sections and that requires supplementary stops - A lift transverse unit can feed in the workpiece pallet onto the longitudinal section when the slide stop is activated - When depressurized, the pneumatically adjustable slide stop is extended to the upper end position - Mounting inside the lift transverse unit HQ 2/C-H

PE 5/OC-T positioning unit - Positioning a workpiece pallet in a manual or automated processing station in the transverse conveyor with high positioning accuracy requirements (±0.3 mm) - Can be used with all WT 5 workpiece pallets - Installation from below - Lift over transport level: 5 mm - Positioning accuracy: ±0.3 mm in x and y direction - Permissible vertical process force with center load: up to 4000 Nregardless of the WT weight - Suitable for ST 5/OC - Compressed air connection: 5 ... 6 bar - Push in air connection: 8 mm

AS 5/H drive unit - For driving ST 5/… conveyor units, CU 5/… curves, DI 5/… diverters, JU 5/… junctions and an HQ 5/… lift transverse unit - Reversible operation possible - Accumulation operation possible - Motor connection with plug (AT = S) or terminal box (AT = K) - Freely selectable motor position and length - Gear motor can be mounted on both sides on the transmission drive (MA = R and MA = L) - Viewing window for checking the toothed belt - Due to the simple and space-saving disassembly of the cover, adjacent components/machines can be positioned at a distance of 20 mm from the AS 5 - Optional frequency converter - Suitable for clean room of ISO class 7 - Suitable for dry room <1% RH

Three-way diverter DI 5/H-3W - The three-way diverter is a ready-for-operation module for branching off workpiece pallets in two directions or combining from two directions. - The king shaft installation for the main or secondary section can be installed on either side - The diverter is controlled as an active element via a pneumatic cylinder (p = 5 - 6 bar) - Note: The three-way diverter is not suitable for accumulation operation. For permissible loads, see table (under order details). - Reversible operation possible - Accumulation operation not permitted - Support profile made of anodized aluminum - Lateral guide profile made of steel, polymer, or aluminum in an anodized aluminum support - Driven via king shaft with bevel gears made of sintered metal - Roller spacing p = 130 - Full rollers - mG Up to 300 kg (at v = 9 m/min) - Pneumatic push-in fitting: 6 mm - Direct position sensing on the diverter arm and the bolt upon request

PE 5 Positioning Unit - Positioning a workpiece pallet in a manual or automated processing station in the longitudinal conveyor with high positioning accuracy requirements (±0.3 mm) - Can be used with all WT 5 workpiece pallets - Installation from above also possible - Lift over transport level: 5 mm - Positioning accuracy: ±0.3 mm in x and y direction - Permissible vertical process force with center load: up to 4000 N2) regardless of the WT weight - Suitable for ST 5/XH and ST 5/H (not ST 5/XH‑FR or ST 5/H‑FR) - Compressed air connection: 5 ... 6 bar - Push in air connection: 8 mm - 2) If assembling in a ST 5/H section place legs directly in front of and behind the PE 5.

AS 5/OC drive units - Drive for ST 5/OC… conveyor units - Reversible operation possible - Accumulation operation possible - Motor connection with plug (AT = S) or terminal box (AT = K) - Freely selectable motor position and length - Gear motor can be mounted on both sides on the transmission drive (MA = R and MA = L) - Viewing window for checking the toothed belt - Due to the simple and space-saving disassembly of the cover, adjacent components/machines can be positioned at a distance of 20 mm from the AS 5 - Optional frequency converter - Suitable for clean room of ISO class 7 - Suitable for dry room <1% RH - Notice: Please take account of the load center of gravity when selecting the drive

AS 5/H-FR drive unit - For driving ST 5/…-FR conveyor units, CU 5/…-FR curves, DI 5/…-FR diverters, JU 5/…-FR junctions and an HQ 5/… lift transverse unit - Reversible operation possible - Accumulation operation possible - Motor connection with plug (AT = S) or terminal box (AT = K) - Freely selectable motor position and length - Gear motor can be mounted on both sides on the transmission drive (MA = R and MA = L) - Viewing window for checking the toothed belt - Due to the simple and space-saving disassembly of the cover, adjacent components/machines can be positioned at a distance of 20 mm from the AS 5 - Optional frequency converter - Suitable for clean room of ISO class 7 - Suitable for dry room <1% RH - Notice: To transport workpieces without workpiece pallets. Use plastic lateral guides to ensure the workpiece is not damaged!

AS 5/XH-FR drive unit - For driving ST 5/…-FR conveyor units, CU 5/…-FR curves, DI 5/…-FR diverters, JU 5/…-FR junctions and an HQ 5/… lift transverse unit - Reversible operation possible - Accumulation operation possible - Motor connection with plug (AT = S) or terminal box (AT = K) - Freely selectable motor position and length - Gear motor can be mounted on both sides on the transmission drive (MA = R and MA = L) - Viewing window for checking the toothed belt - Due to the simple and space-saving disassembly of the cover, adjacent components/machines can be positioned at a distance of 20 mm from the AS 5 - Optional frequency converter - Suitable for clean room of ISO class 7 - Suitable for dry room <1% RH - Notice: To transport workpieces without workpiece pallets. Use plastic lateral guides to ensure the workpiece is not damaged!

HQ 5/XH lift transverse unit - The HQ 5 lift transverse unit is a ready-for-operation module for branching transport. It lifts the workpiece pallet from the rollers and moves it transversely to the original conveyor direction via a driven roller section - Note: Note the orientation of the workpiece pallet after branching - Can be used with all WT 5 workpiece pallets - The transverse transport level is 4.5 mm above the transport level of the longitudinal section - Protective casing can also be removed in the case of low conveyor heights - Compressed air connection: 5 ... 6 bar - Pneumatic push-in fitting: 6 mm

AB 5 drive kit - For face-side driving of conveyor units ST 5/… and CU 5 - Adaptation of the sheet metal parts is required - Suitable for reversible operation (max. 20 Nm) - With a Lenze gear motor (GM = 1) or with interface for installing a SEW gear motor (GM = 2) - Motor connection with plug (AT = S) or terminal box (AT = K) - Optional frequency converter - Notice:- Maximum length of the driven total section with p = 130 and 45 Nm motor output = 19.5 m (longer sections on request)- Suitable for driving two connected curves