Panduit Industrial Automation Spare Parts

The 25G SFP28 DAC assembly features factory-terminated SFP28 passive modular connectors at both ends, designed for high-speed data transfer. This passive copper cable utilizes twinaxial construction and is made with a 30 AWG gauge, ensuring optimal performance over a length of 2 meters.The cable is characterized by its red color and PVC jacket material, allowing it to operate effectively within a range of -25°C to 80°C. The assembly meets various standards, including IEC 60332-3-24 and RoHS compliance, ensuring safety and environmental responsibility.With a nominal diameter of 6.1 mm and a bend radius of 30.48 mm, it can be easily integrated into tight spaces without compromising performance. This product segment is identified as EDI-DC, and it supports a data transfer rate of up to 25 Gb/s, making it suitable for high-demand applications.

This trunk cable assembly, designated as FZTYP5EL2SAF090, is designed for indoor applications, utilizing OM4 fiber to support high data rates. The assembly features a plenum-rated (OFNP) construction, ensuring compliance with stringent fire safety standards, making it suitable for high-density environments.The cable is 90.00 ft (27.43 m) in length and includes an MPO female connector on end A and an LC duplex connector on end B. It is engineered to maintain a maximum connector insertion loss of 0.5 dB and a minimum return loss of 26 dB, ensuring reliable signal integrity.Its construction allows for a tensile strength of 440 N (approximately 98.92 lb), accommodating various installation scenarios. The cable operates within a temperature range of -20 °C to 70 °C (-4 °F to 158 °F), with installation temperatures varying from -10 °C to 60 °C (14 °F to 140 °F). This flexibility is beneficial for a range of deployment conditions.Small diameter trunk assemblies like this one optimize space usage by 30-40%, facilitating better cable management and installation efficiency, which is critical for modern data centers and networking environments.

The PV14-8F-C Fork Terminal is constructed with vinyl insulation and is specifically designed to accommodate wire sizes between 14 and 16 AWG. This terminal utilizes a brazed seam construction that enhances the integrity of the terminal barrel, preventing splitting during crimping.With a maximum operating voltage of 600V and a flammability rating of UL94V-0, the terminal is suitable for various applications requiring reliable electrical connections. The barrel features funnel type design and serrations that ensure optimal wire contact and tensile strength.The terminal's overall dimensions include a length of 22.9 mm and a width of 7.87 mm, with a tongue length also measuring 22.9 mm. It is compatible with various connectors, including CT-100 and CT-1550, making it versatile for different installations. This terminal meets UL and CSA standards, ensuring compliance and safety in use.

The Rack Shelf is an accessory that is designed to support large networking equipment. It complements the 4-Post Rack System in Data Center and Enterprise Applications. The Adjustable Support Bracket allows for the Shelf to Mount to the Equipment Rails at Various Depths. The shelf is made of steel, is black in color and 30 inches deep.

The Steel Rack Mount Shelf, specifically designed for 2-Post Racks, is an essential component in any industrial or automation setup. This shelf, measuring 2 RU, is constructed from high-quality steel and offers a remarkable load capacity of 66 pounds. It is ideally suited for mounting test gear, computer equipment, and small networking devices on racks with 3 inch (76mm) or 6 inch (152mm) channels. The shelf's one-piece design ensures stability and durability, while its black finish adds a touch of elegance to your setup.This Steel Rack Mount Shelf is compatible with EIA Racks and mounts to the front, providing easy access to your equipment. Whether you're in need of additional storage space or require a reliable platform for your devices, this shelf is an excellent choice.

Panduit PLT2I-C76 Tefzel locking cable ties are designed for applications requiring resistance to environmental stresses such as chemical attack, gamma radiation, ultraviolet radiation and extreme temperatures. Ideal for use in nuclear power facilities and chemical processing plants. Low smoke density and excellent flammability rating of UL 94V-0. Intermediate cross section, 8.0” (203mm) length. For indoor or outdoor use, made of Tefzel, are a distinctive aqua blue in color and come in packages of 100.

The tool-less blanking panel is designed to minimize bypass airflow in racks and cabinets while providing a desirable appearance. The tool-less blanking panel is 1 RU and mounts to square hole 19.0-inch (483mm) wide cage nut rails.

The UTP RJ45 Cat 6 TG Jack Module is engineered to terminate 4-pair, 22-26 AWG twisted pair cable with a design that allows for tool-free TG style termination. Each module undergoes rigorous factory testing to surpass the performance requirements outlined in ANSI/TIA-568-C.2 Category 6A and ISO 11801 Class EA standards, ensuring reliable support for 10GBASE-T transmission over twisted pair cabling systems.Structured for compatibility with Mini-Com Modular Patch Panels and Faceplates, this module features a green polycarbonate body and is individually serialized for traceability. The wiring scheme supports both T568A and T568B configurations, and the unshielded design contributes to its streamlined functionality. With a maximum operating temperature of 75 °C (167 °F) and a minimum operating temperature of -10 °C (14 °F), the module is suitable for diverse environmental conditions. Notably, it is rated for 2500 cycles with IEEE 802.3af / 802.3at and proposed 802.3bt Type 3 and Type 4 applications.

The hinged wall mount bracket expands rack space to the wall, maximizing space in telecommunication rooms. This product can be used with other accessories to achieve an open wall mount rack application for patching or small active equipment. This bracket has an overall depth of 6.26 inches. The wall mount bracket is made of steel, is 1 RU, and is black.

The KP-1165Y Terminal Kits contain an assortment of terminals including (18) PV18-8R, PV14-10R, PV18-6F, PV14-8F, (10) PV10-8R, PV10-10R, as well as BSV18X, BSV14X, BSV10X, and DV18-250B, DV14-188B terminals. Additionally, the kit includes (5) JN418-212 connectors and a CT-160 tool, all packaged in a KP-1000 box.This terminal kit is part of the IEI product segment and serves as a replacement for the KP-1165 model. With an overall length of 6.75 inches (172 mm) and a width of 11 inches (279.4 mm), it is suitable for various applications. The kit adheres to RoHS compliance and is ARRA compliant, ensuring it meets relevant standards.

The MLT4S-CP316 self locking cable tie speeds up installation with a unique self-locking head design that locks into place at any part of the tie body. The smooth surfaces and rounded edges assure cable protection and worker safety while providing a strong, durable method of cabling bundle. The MLT4S-CP316 cable tie can be used in a wide range of indoor, outdoor, and underground applications. Color Stainless Steel.

Panduit PLT3I-C Locking Cable Ties are designed to satisfy the needs of general applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Intermediate cross section, 11.4” (290mm) length. For indoor use, made of Nylon 6.6, are natural in color and come in packages of 100.

Panduit SSC2S-S10-M Sta-Strap® Clamp Ties are used to secure cable bundles to another surface such as a control panel, communication rack, wall or ceiling. This cable tie design allows for bundling before or after screwing clamp in place, for use with #10 (M5) screw. Standard cross section, 7.4” (187mm) length. For indoor use, made of Nylon 6.6, are natural in color and come in packages of 1000.

The S100X225VAC Thermal Transfer Self-Laminating Label includes a white print-on area and clear overlaminate to protect the legend for easy identification. It is sized specifically for wire and cable applications. The cassette contains an integrated memory device for automatic formatting, recall of last legend used, and the number of labels remaining. For use with LS8E and LS8EQ printers. Vinyl. 1.0" x 2.25" (25.4 mm x 57.15 mm). Color Clear/White. 125 labels/cassette. 1 cassette/package.

The fiber adapter panel is configured for OS2 fiber optic applications and includes 12 LC simplex connectors. These adapters, made with zirconia ceramic, are characterized by their blue color and are compliant with industry standards such as RoHS and TIA/EIA-568-C.3. With an overall width of 4.3 inches (109.2 mm) and a height of 1.39 inches (35.3 mm), the panel is designed to be front-loading for ease of installation. This product is specifically designed for integration with Opticom® rack and wall mount enclosures, fiber adapter patch panels, and zero RU fiber adapter panel brackets. It supports medium to high-density fiber optic network deployments as outlined in the data center cabling standard TIA 942, suitable for use in main distribution, horizontal distribution, and equipment distribution areas.

The S200X650VATY Thermal Transfer Self-Laminating Label is engineered for effective identification and organization in wire and cable applications. This label includes a white area for printing and a clear overlaminate that safeguards the printed legend, ensuring visibility and durability.Constructed from vinyl, the label measures 2 inches in width and 6.5 inches in length (50.8 mm x 165.1 mm) and is compatible with TDP printers, making it ideal for users of Easy-Mark Plus Labeling Software. It meets various standards including RoHS compliance and UL969 recognition, reinforcing its reliability in industrial settings.The label is suitable for a range of wire gauges from 1/0 to 250 MCM, accommodating cable diameters from 0.48 inches (12.2 mm) to a maximum of 1.59 inches (40.4 mm). It operates effectively within a temperature range of -40°F to 150°F (-40°C to 66°C). With 1000 labels included in each package, this product is designed to enhance the cable marking process, ensuring clear identification in various applications.

The PW75F-C20 Pan-Wrap Split Harness Wrap features a patented slot pattern that provides improved flexibility and abrasion protection in any application. The unique wall design is easy for cable breakouts and reduces the installation time. The large overlap accommodates a wide range of bundle diameters. Temperature range: -40°F – 122°F (-40°C – 50°C). Polyethylene. Nominal Diameter: 0.75" (19.1 mm), 100' (30.5 m) long. Color Black. 1 per package.

The LCAX4/0-12-X Compression Lug is engineered for use with 4/0 AWG copper flex conductors, accommodating a single 0.5-inch stud. This one-hole lug features a standard barrel design that includes an inspection window, which facilitates verification of complete conductor insertion. The wire entry has been thoughtfully beveled to prevent damage to conductor strands during installation.Constructed from copper and finished with a tin plating, this lug is designed to resist corrosion, ensuring longevity and reliability in electrical applications. The component meets rigorous standards including C22.2 No. 65-13 and UL temperature ratings up to 90°C, with a maximum voltage capacity of 35 kV. Compliance with various die index numbers allows for appropriate crimp die selection, enhancing compatibility and performance in a range of industrial environments.

The LCA4-56-L Compression Lug is designed for 4 AWG conductors and features a standard barrel with an inspection window, facilitating proper crimp die selection with color-coded markings. The lug is constructed from tin-plated copper, which provides corrosion resistance, and it supports a maximum voltage rating of 35 kV while being temperature rated for 90°C.With an overall length of 1.75 inches (44.4 mm) and a barrel length of 0.81 inches (20.6 mm), this lug is engineered for efficient electrical connectivity. The stud hole size measures 5/16 inches (7.9 mm), allowing for easy installation. Compliance with UL and CSA standards ensures reliability in various applications.

The M12 X-Code Female to RJ45 Coupler Adapter is suitable for manufacturing and various industrial settings. It is available in both straight and angled configurations, ensuring versatility in installation. This adapter features an ingress protection rating of IP20 on the RJ45 side, while the M12 side achieves IP68 when mated, providing robust protection in demanding environments.With a performance level of Category 6A, this industrial coupler adheres to multiple standards including ANSI/TIA568-C.2 Category 6A, ISO 11801 Class EA, and IEC 61076-2-109, along with compatibility with ODVA Ethernet/IP, PROFINET, and CC-Link standards. The compact design includes dimensions of 53 mm in length, 32 mm in width, and 27.1 mm in height, making it efficient for space-constrained applications.