Phoenix Contact Industrial Automation Spare Parts

The surge protection device, designated as UBK 2-500, is a DIN rail module tailored for safeguarding two signal wires. It is engineered with a self-contacting grounding foot, which facilitates installation on NS 32 or NS 35/7.5 rails, and measures 17.5 mm in width. The module is rated for a nominal voltage of 500 V AC and offers an overvoltage category of III.This device's technical specifications include a maximum continuous operating voltage of 500 V AC and a rated current of 2 A. The surge protection is characterized by a nominal discharge current of 10 kA for both line-line and line-ground scenarios, ensuring robust protection against voltage spikes. Furthermore, the voltage protection level reaches 3.5 kV (C2 - 10 kV / 5 kA) for line-line and 2.2 kV (C2 - 10 kV / 5 kA) for line-earth configurations.With an operating temperature range of -40 °C to 80 °C, this device is suitable for various environments. Its compact design, with dimensions of 17.5 mm in width, 90 mm in height, and 46 mm in depth (including the DIN rail), allows for efficient use of space in control panels and cabinets. The module's construction from PA 6.6 material and its IP20 protection degree further enhance its reliability in industrial applications.

The 6X4-NS35A BN distribution block features a horizontal alignment, allowing for effective bridging between multiple blocks through its conductor shaft. It supports a nominal voltage of 800 V and a nominal current rating of 32 A. The connection method employed is push-in, accommodating conductor cross sections from 0.2 mm² to 6 mm².This block is suitable for mounting on NS 35/7.5 and NS 35/15 rails. Its compact dimensions include a width of 18.5 mm, a height of 45.7 mm, and a depth of 30.9 mm when mounted on NS 35/7.5. The block is colored brown (RAL 8028) and is constructed from PA insulating material, which provides a temperature index of 130 °C and operates effectively within a temperature range of -60 °C to 110 °C.Notably, it has a maximum load current of 41 A and supports a maximum total current of 63 A, ensuring robust performance in various applications. The distribution block is compliant with IEC 60947-7-1 standards, making it suitable for industrial use. It is also designed to withstand environmental conditions with a degree of pollution rated at 3 and overvoltage category III.PTFIX 6X4-NS35A BN

The device connector is designed for rear mounting and supports Ethernet CAT5 communication at a speed of 1 Gbps. It features an 8-position configuration and comes with a 5 m cable, allowing for flexible installation options.With its coding type A, this flush-type female connector utilizes the M12 SPEEDCON interface and is rated IP67, ensuring protection against dust and water ingress. The connector housing is constructed from GD-Zn with a nickel surface, while the insulating body is made of PA 6.6.This device has a rated surge voltage of 0.8 kV and an insulation resistance of ≥ 500 MΩ*km, making it suitable for various industrial applications. The connector pair must be correctly locked and mounted to maintain its electrical and mechanical integrity. In environments where contamination may occur, a protective cap should be used to enhance the sealing to IP54.Designation Code: VS-M12FSBP-OE-94B-LI/5,0. The cable is designed with an external diameter of 6.40 mm and is composed of a PUR outer sheath in water blue RAL 5021 color. It maintains a temperature range of -40 °C to 80 °C for fixed installations, ensuring durability in demanding conditions.

The contact insert designated as HC-B06-I-TPT-F features a configuration of 6 positions plus PE, suited for power applications. This insert utilizes a push-in connection method, allowing for efficient connectivity.With a maximum rated voltage of 500 V and a current rating of 16 A, it accommodates conductor cross-sections ranging from 0.25 mm² to 1.5 mm², which supports a variety of wire gauges from AWG 24 to 16. The overall dimensions include a width of 34 mm, height of 32 mm, and a length of 50.5 mm, with a horizontal drill hole distance of 44 mm.Designed for reliability, the contact insert can endure a minimum of 500 insertion and withdrawal cycles. It operates effectively within an ambient temperature range of -40 °C to 125 °C. The contact material is a copper alloy with a silver contact surface, ensuring optimal conductivity and performance.To guarantee proper operation, installation within a housing that provides at least IP54 protection is necessary. The component complies with various standards, including DIN EN 61984, and possesses a flammability rating of V0 according to UL 94, making it suitable for demanding environments.

The VC-TFS 8 contact insert is part of the VARIOCON range and is constructed from polyamide, presented in a light grey color. This component accommodates up to 8 positions and is rated for a maximum voltage of 160V and a current of 10A. The connection method employed is screw connection, specifically for socket type contacts.It is crucial to note that connectors should only be connected or disconnected when there is no load present, ensuring safe operation. With its durable housing material, this contact insert is suitable for various applications requiring reliable electrical connections.

The UM-ALU 4 AU45 L990 profile cover is designed with a press-drawn section housing and is suitable for screw mounting. It has a total width of 45.6 mm, and the internal profile width measures 42 mm, making it suitable for various applications where space efficiency is critical.This profile cover has a length of 990 mm and a depth of 28.1 mm. Constructed from anodized aluminum, it ensures durability and resistance to environmental factors, achieving an IP40 rating for protection. The operational ambient temperature range is between -40 °C and 100 °C, accommodating diverse operational conditions.Designed for optimal PCB integration, it can support PCB thicknesses ranging from 1.44 mm to 2 mm. The device features four PCB holders and a mounting type that allows for parallel positioning to the DIN rail, enhancing installation flexibility. The product is packed in cardboard for secure transportation.

The COMBI receptacle is designed for a nominal voltage of 500 V and supports a maximum nominal current of 24 A. It employs a push-in connection method, enabling efficient wiring with a rated cross-section of 2.5 mm². This receptacle can accommodate conductors with a cross-section ranging from 0.14 mm² to 4 mm².This device is compliant with Designation Code PPC 2,5/1-L GNYE and is suitable for various industrial applications. Constructed from PA insulating material, it exhibits a flammability rating of V0 according to UL 94 and is capable of withstanding temperatures from -60 °C to 125 °C. The receptacle is compact, with dimensions of 5.2 mm in width, 20.5 mm in height, and 41 mm in depth.Designed for environmental resilience, it is rated for overvoltage category III and operates effectively in polluted environments up to degree 3. The maximum load current of 24 A is achieved when utilizing a 2.5 mm² conductor cross-section. Additionally, the receptacle meets several fire protection standards for rail vehicles, ensuring compliance with safety requirements.

The PTFIX 12X1,5 OG distribution block enables efficient bridging between blocks via the conductor shaft. This component is equipped with a push-in connection method and supports a cross-section range of 0.14 mm² to 2.5 mm². It is designed for various mounting options, including direct mounting with a flange, snapping onto a DIN rail adapter, or free-hanging installations. The nominal voltage rating stands at 450 V, while the nominal current is rated at 17.5 A.Manufactured in Poland, this block accommodates up to 12 connections per level and is compliant with IEC 60998-2-2 standards. The device operates effectively within a temperature range of -60 °C to 110 °C, making it suitable for diverse environmental conditions. Its orange color (RAL 2003) enhances visibility in installations, and it features a flammability rating of V0 according to UL 94.Additional specifications include a maximum load current of 22 A and a maximum total current of 26 A. The dimensions of the block are 24.9 mm in width, 21.6 mm in height, and 17.7 mm in depth. The permissible humidity levels for operation range from 20% to 90%, ensuring adaptability in various settings.

The MACX MCR-SL-2I-2I-HV-ILP-SP is a two-channel input isolator that provides electrical isolation for analog signals, featuring a signal transmission behavior where the input equals the output. It operates within a current input range of 0 mA to 20 mA, effectively managing a maximum input signal voltage of less than 30.5 V.This device utilizes push-in connection technology for streamlined installation, accommodating conductor cross-sections from 0.2 mm² to 2.5 mm². The isolator is characterized by a high degree of safety, offering 2-way electrical isolation and a rated insulation voltage of 600 Vrms. It ensures reliable operation with a maximum temperature coefficient of ≤ 0.002 %/K and a typical transmission error of 0.08 %.With a compact design of 12.5 mm in width and 107.9 mm in height, it is suitable for DIN rail mounting. The device is rated for operation in ambient temperatures ranging from -40 °C to 85 °C, making it versatile for various environments. The isolator complies with the EN/IEC 60079-0 standards, ensuring safety in potentially hazardous locations.

The D-SUB bus connector, model SUBCON-PLUS-PROFIB/90X/M12, is designed for industrial applications, enabling reliable communication within PROFIBUS DP systems at speeds of up to 12 Mbps. This unit features a 9-position pin layout with specific pin assignments of 3, 5, 6, and 8. The connector is equipped with two M12 cable entries at a 90-degree angle, facilitating flexible installation options. Constructed from durable polyamide, the connector measures 93 mm in length, 16 mm in width, and 41 mm in height, ensuring compatibility with various industrial setups. It operates effectively within a temperature range of -30 °C to 80 °C and can withstand humidity levels from 10% to 95% without condensation. The unit is also rated for an altitude of up to 5000 m, making it suitable for diverse operational environments. For enhanced performance, this connector includes a termination resistor via a separate M12 terminator. The specified tightening torque is 0.4 Nm, and the connector is vibration and shock resistant, conforming to EN 60068-2 standards. The expected mean time to failure (MTTF) is approximately 6706 years based on standard conditions, ensuring long-term reliability in industrial settings.

Efficiently distribute power in your control cabinet with the Phoenix Contact 1046975 distribution block. This compact and versatile block is designed for straightforward and secure electrical connections, leveraging the rapid and tool-free Push-in connection technology.The 1046975 features a robust Line contact rated for a nominal current of 41 Amperes and accommodates wire cross-sections from 0.2 mm² to 6 mm² (rated at 4 mm²). It also provides multiple Load contacts, supporting smaller wire cross-sections from 0.14 mm² to 2.5 mm² for distribution to various loads. The vibrant red color allows for clear identification of power lines. Designed for flexible mounting, this distribution block utilizes an adhesive mounting type, enabling quick and secure placement in tight spaces. This Phoenix Contact distribution block is an ideal solution for simplifying complex wiring, saving space, and ensuring reliable power distribution in industrial and commercial electrical installations.

The REL-IR2/LDP- 60DC/2X21 is a plug-in industrial relay designed for high performance with an input voltage of 60 V DC. This device includes two changeover contacts and features a test button, status LED, and a freewheeling diode for enhanced functionality.With a mechanical service life of approximately 2 x 107 cycles, it operates at a 100% operating factor, ensuring reliability in demanding environments. The relay supports a range of input voltages from 46.8 V DC to 117 V DC and exhibits a typical response time of 13 ms and release time of 14 ms.Constructed with basic insulation and rated insulation voltage of 250 V AC, it adheres to the IEC 60664 standards. The relay also features a maximum switching voltage of 250 V AC/DC and can handle a limiting continuous current of 12 A. Its compact dimensions of 21.2 mm width, 27.5 mm height, and 35.6 mm depth allow for versatile mounting options.Designed to operate in ambient temperatures ranging from -40 °C to 70 °C, it is suitable for a variety of applications, including harsh environments as specified by ISA-S71.04. The relay's degree of protection is classified as RT I, further enhancing its durability.

This socket is designed for pin connector pattern type K and utilizes a screw connection, making it compatible with the electrical standards of Denmark and several other regions. It incorporates a green LED display that enhances visibility and indicates operational status. This unit is capable of being mounted directly or on a DIN rail, providing flexibility in installation. Operating within a temperature range of -20 °C to 60 °C, it is suitable for various environmental conditions. The socket adheres to the standards specified in SR 107-2-D1 and is rated for 250 V AC and 16 A.In terms of connection data, the socket accommodates solid conductors with a cross-section ranging from 0.2 mm² to 4 mm² and flexible conductors between 0.2 mm² and 2.5 mm². For AWG standards, it supports conductor sizes from 24 to 12. This design ensures robust performance across diverse applications while maintaining compliance with environmental regulations, including REACh SVHC and China RoHS, with an environmentally friendly use period of 50 years.

The CA-07P1N8A90DN is an M23 coupler connector designed for reliable signal transmission. It features a straight configuration and is shielded for enhanced protection against interference. This connector is suitable for use with standard and SPEEDCON interlocks, accommodating a cable diameter range of 3 mm to 14.5 mm. The connector has a total of 7 positions and utilizes pin contacts, ensuring secure connections with a crimp method.Manufactured in Germany, this connector complies with RoHS II regulations without Exemption 6c, maintaining a lead content of less than 0.1%. The insulating body is made from PA 6.6, while the housing consists of copper zinc alloy for the turned parts and die-cast zinc for the housing. The connector supports a rated current of 20 A and a rated voltage of 48 V AC, making it suitable for various applications. It is rated for a maximum surge voltage of 1.5 kV, with overvoltage category III and pollution degree 3.With an ambient temperature range of -40 °C to 125 °C and a protection degree of IP67 when plugged in, this connector is designed for demanding environments. Additional features include a litz wire cross-section capacity of 1 mm² to 2.5 mm² for signal contacts and a specified humidity range of 50% to 65% for storage and transport.

Stripping tool, for cables and conductors (especially for cables protected against short circuits and ground leakages) 1.5 - 6 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade

The CK1,6-ED-1,50BU AG Crimp Contact is a high-quality electrical connector designed for reliable and efficient connections in various applications. This crimp contact features a turned socket design with a contact diameter of 1.6 mm, ensuring secure and stable connections.Constructed from copper alloy, this crimp contact offers excellent conductivity and durability. The silver-plated contact surface enhances the electrical performance and corrosion resistance of the connector.The connection cross section ranges from 1.5 mm² to 1.5 mm², making it compatible with AWG 16 cables. This crimp contact is an ideal choice for applications requiring a combination of high reliability, durability, and efficient electrical performance.

The 32-channel input relay module UM-2KS50/32-MR/21/ADV151/SO179 offers a robust solution with a single normally open (N/O) contact design. It includes a screw connection and a fuse rated at 1 A, ensuring reliable performance in various applications.Designed for compatibility with Yokogawa ADV151 and ADV161 cards, this module features a redundant I/O connection and voltage supply through a 50-position terminal strip. It operates within a nominal input voltage range of 24 V DC, with an input voltage range of 21.6 V DC to 26.4 V DC and a typical input current of 18 mA per channel.With a mechanical service life rated at 3 x 107 cycles, the module provides functional insulation and meets overvoltage category II and pollution degree 2 standards. The maximum switching voltage is 24 V AC/DC, with a maximum current per channel of 100 mA and a total current limit of 1 A.Additional features include a typical response time of approximately 10 ms and a typical release time of 10 ms, facilitating quick operational responses. The module is housed in a green casing (RAL 6021) and is designed for DIN rail mounting in any orientation. Its ambient operating temperature ranges from -20 °C to 50 °C, while the storage temperature can reach as low as -20 °C and up to 70 °C.

The device marker, designated as LS-EMLP (27X8) YE, is a yellow unlabeled sheet designed for applications requiring direct labeling. This product supports labeling with TOPMARK NEO and TOPMARK LASER technologies, ensuring versatility in identification tasks.Each sheet contains 120 individual labels, with a lettering field dimension of 27 mm in width and 8 mm in height. The adhesive mounting type allows for secure application on various surfaces. The marker operates effectively within a temperature range of -20 °C to 85 °C and is recommended to be stored at 23 °C with 50% relative humidity to maintain optimal performance.Constructed from ABS material, the device marker features a foil strength of 800 µm and an adhesive strength of 50 µm, ensuring durability in various environments. The product has undergone rigorous testing for wipe resistance according to DIN EN 61010-1 standards, demonstrating its reliability under demanding conditions. It is free from silicone and halogen, adhering to industry standards for environmental safety.

The Power Connector is engineered for robust electrical connections, featuring a 4-position unshielded design with an angled M12 socket that adheres to T-coding standards. The connector utilizes a screw connection for secure attachment, ensuring reliability in various applications.Constructed with a knurl made from zinc die-cast and nickel-plated for enhanced durability, this connector includes a Pg11 cable gland that accommodates external cable diameters ranging from 8 mm to 10 mm. It is rated for direct current applications, supporting a nominal current of up to 12 A and a voltage of 63 V.Designed for ease of installation, it features a suitable tightening torque and a well-defined stripping length for individual wires. The connector's materials are selected for their flammability rating according to UL 94, ensuring compliance with safety standards.

The DIO 8/4 M8 is designed as a space-efficient local bus device, making it ideal for applications requiring proximity to operational processes. It integrates 4 digital inputs and 4 digital I/Os, each capable of handling a maximum current of 500 mA. This device offers advanced features such as channel-specific diagnostics, ensuring reliable performance and quick identification of issues.Furthermore, it includes short-circuit and overload protection, enhancing the safety and durability of the system. The connection is facilitated through an M8 interface, ensuring a robust and secure link. The device is engineered for seamless integration into existing setups, making it a versatile choice for various industrial applications.