Schneider Automation Spare Parts – Reliable Solutions for Industrial Automation

The NFC fuse cartridge is specifically designed for use with TeSys GS switch-disconnector fuses, providing essential protection against thermal overloads and magnetic overcurrents in standard applications. With a rated current of 40 A and a maximum operational voltage of 690 VAC, this cylindrical fuse measures 22 mm x 58 mm.It is classified as a gG fuse-link, ideal for safeguarding electrical circuits. Notably, this fuse does not include a striker to indicate a blown state, which is a design consideration for certain applications. The fuse is available in sets of 10 parts, with a total weight of 0.045 kg per unit.

The control relay features a configuration of 5 contacts, specifically 3 normally open (NO) and 2 normally closed (NC), with a maximum operational voltage of 690 V AC and a control circuit voltage of 380 V AC at a frequency of 50/60 Hz. This device is capable of managing electromagnetic loads categorized under AC-15 and DC-13, ensuring versatility in various applications. Operating under stringent conditions, this relay supports an ambient temperature range from -40 to +60 °C, with provision for derating between 60 to 70 °C. It achieves a high reliability with an operating rate of up to 180 cycles per minute. The compact dimensions of 45 mm in width allow for mounting on standard 35 mm DIN rails or fixed installation via screws. Certification of the product includes compliance with multiple international standards such as IEC, UL, CSA, and others, underscoring its global applicability. The high insulation resistance exceeding 10 MΩ and the rated impulse withstand voltage of 6 kV highlight its robustness against electrical surges. Moreover, with a mechanical durability rated for up to 30 million cycles, this relay promises extended service life. The unit is designed for easy installation, featuring screw clamp terminals accommodating various cable sizes, ensuring secure electrical connections.

This XCMD miniature format limit switch has a thermoplastic roller lever and a Zamak body. This limit switch has a robust Zamak miniature and modular body, is pre-cabled, allowing an easier installation. It is IP66 and IK06 impact resistant, making it ideal for heavy duty use in harsh conditions. It is fixed on the machine by its body, and has a typical 5 million cycles electrical durability in DC-13 utilization category. It complies with CCC, EN/IEC 60947.-5-1, CSA C22.2 No.14, EN/IEC 60204-1, UL 508 standards. Compatible with the well distributed range of common XCK heads, allowing quick replacement in case of damage. Variable composition design allows late modifications on the switch, for example change of connection type or head.

The Limit Switch Head, XC Standard, ZCE, M12 Steel Roller Plunger is designed for precision and reliability. This head features a robust steel roller plunger that ensures accurate positioning. It is equipped with M12 fixing nuts for easy installation. Compatible with various bodies from the XCKD, XCKP, and XCKT ranges, this limit switch head offers versatility in your automation systems.

This flexible core current transducer is designed for retrofit applications, supporting a line rated current range of 50A to 5000A. It can be wrapped around cables with a maximum outer diameter of 146mm. The transducer offers a measurement accuracy of ±1% across its entire range. A 2.4-meter flying lead is included for connection to a meter, facilitating straightforward integration into existing systems. This product meets various standards including UL 61010-2-032 and EN 61010-1, ensuring compliance with international safety regulations. It is recognized by cURus and is UL recognized. The operational temperature range is from -15°C to 60°C, while storage conditions can reach up to -40°C to 70°C. The transducer is also rated for a maximum pollution degree of 2, ensuring reliable performance in diverse environments.

The TeSys D contactor is engineered for integration into diverse control systems, facilitating motor starter applications across various use cases. This specific model features a configuration of four poles, all normally open, capable of handling resistive loads up to 40A. The contactor is designed with a coil rated at 42VAC for both 50Hz and 60Hz operations. Dimensions for this unit are 91mm in height, 45mm in width, and 99mm in depth, with a net weight of 0.425 kg. Its structural design allows for mounting on standard DIN rail or direct panel installation. The contactor includes one normally open and one normally closed auxiliary contact, with the NC contact being certified as mirror. It employs screw clamp terminals for efficient load and auxiliary connections, ensuring reliability and ease of installation. The product meets multiple international standards, including UL, CSA, and IEC certifications, and is classified under various environmental regulations, including RoHS and REACh, marking it as a sustainable choice. The mechanical robustness is validated with a vibration tolerance of 2 Gn while open and 4 Gn while closed, and it withstands shocks of up to 15 Gn. Operating conditions allow for altitudes up to 3000m and ambient temperatures ranging from -40°C to 60°C without derating. In terms of electrical specifications, the contactor supports a rated breaking capacity of 450A at 440V. Its rated insulation voltage is 600V for the power circuit, and it has a rated impulse withstand voltage of 6kV, ensuring high reliability in demanding environments. The electrical durability is rated at 1.4 million cycles at 40A AC-1 for voltages up to 440V, while the mechanical durability extends to 15 million cycles. Overall, the TeSys D contactor is a versatile solution for controlling resistive loads, tailored for robust applications across various industrial sectors and compliance with the Designation Code.

The SH3 055 servo motor is designed as part of the Lexium 52 & Motors range, specifically engineered for integration with PacDrive 3 systems. This 3-pole motor exhibits a maximum mechanical speed of 9000 RPM and incorporates a smooth shaft end, eliminating the need for a holding brake. Equipped with an absolute multi-turn SinCos Hiperface® encoder providing 128 periods of feedback resolution, this motor operates on a rated supply voltage between 115V and 480V. It delivers a continuous power output of 680W, alongside a continuous stall current of 1.7A. The shaft configuration consists of a 9mm diameter and 20mm length. Electrical connections are facilitated through rotatable right-angled connectors. The unit is rated for both IP54 and IP65 environmental protection. Physical specifications include a total length of 176.5mm, a centering collar depth of 2mm with a 40mm diameter, and a mounting hole diameter of 63mm. The motor’s weight is 1.8kg. Designed for compatibility with PacDrive 3, it utilizes the international standard 55mm flange mount and incorporates a natural convection cooling system. This servo motor complements the Lexium 62 multi-axis system, contributing to the flexibility of the PacDrive motion control solution.

The Thalassa PLA floor-standing enclosure offers a practical solution for various applications, constructed with a sealed top and an open bottom. Its dimensions are 1250 mm in height, 1000 mm in width, and 320 mm in depth, making it suitable for diverse equipment needs. Manufactured from polyester reinforced with fiberglass, this enclosure ensures durability and resistance against harsh environments, including both outdoor and industrial settings. The enclosure is available in grey (RAL 7035), providing a neutral appearance for integration into various environments. Accessibility is a key feature, with two plain front doors that open from both the right and left sides up to 120°. The doors are equipped with a four-point locking mechanism and a handle that includes a 5mm double-bar insert. Maintenance is facilitated by the removable doors and rear panels, which are designed for easy access to internal components. Protection against environmental hazards is prioritized, with an IP54 rating according to IEC 60529, enabling resistance to dust and water ingress. The enclosure also meets IK10 standards (IEC 62262) for impact resistance and can withstand fire exposure up to 960°C, as specified by IEC 62208. Additionally, it features class II electrical insulation to mitigate electric shock risks, allowing for the creation of fully insulated solutions. The enclosure is UL certified and can function effectively in ambient air temperatures ranging from -35°C to 90°C.

The Altistart 22 soft starter is capable of managing 3-phase asynchronous motors through supply line connections. It supports a power range from 3HP to 15HP and operates within a voltage range of 230V to 575V AC. This unit is suitable for various applications, including centrifugal and piston pumps, fans, screw compressors, and material handling systems.With a slim design, the soft starter allows for flexible installation in diverse machine frames. It integrates a bypass feature that minimizes noise and reduces heat generation, enhancing operational reliability. The unit is compatible with SoMove software, facilitating straightforward configuration transfers for quick spare installations. This functionality ensures smooth motor starts, mitigating mechanical strain and prolonging equipment lifespan.This product complies with numerous standards, including IEC 60947-4-2 for electromagnetic compatibility, and is designed to operate within ambient temperatures of -10°C to 40°C without derating, extending to 60°C with a current derating of 2.2% per °C. It also features shock resistance of 15 gn for 11 ms and vibration resistance adhering to IEC 60068 standards.

The Linergy TR marking card is designed for use with terminal blocks and features a white background. This marking accessory includes six strips, each measuring 8mm, and is unmarked, allowing for customizable labeling with up to 42 characters. Sold in sets of 10, this product is compliant with Green Premium standards, ensuring it is free from toxic heavy metals and adheres to RoHS and REACH regulations.Manufactured from polyamide 6/6, each marking card has a net weight of 2 grams. The product's characteristics support various applications, making it suitable for organized identification in electrical setups. The compliance with environmental standards reflects a commitment to sustainability, as it is mercury-free and contains no substances of very high concern.

This Altivar 212 variable speed drive can feed 3-phase asynchronous motors. Its protection index is IP21 and it has a built-in EMC filter. It works at a rated power up to 15kW / 20hp and a rated voltage from 380V to 480V AC. Its design is based on eco-energy with a reduction in energy consumption of up to 70% compared to a conventional control system. Thanks to its cable temperature rise reduction technology, the Altivar 212 drive offers immediate, disturbance-free operation avoiding additional options such as a line choke or DC choke to deal with current harmonics. It weighs 11.65kg and its dimensions are, 245mm wide, 330mm high, 190mm deep. It is specifically designed for the most common fluid management applications in tertiary sector buildings (HVAC) like heating, ventilation, air conditioning and pumping. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, C-Tick and NOM certified. The Altivar 212 offers optional motor chokes which can increase the maximum cable lengths between the drive and the motor and limit disturbance at the motor terminals. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. The Altivar 212 drive can easily be adapted to all building management systems thanks to its numerous functions and communication protocols integrated as standard, Modbus, METASYS N2, APOGEE FLN P1 and BACnet.

The door cross rails are specifically designed for Spacial SF and SM enclosures, featuring a nominal width of 400 mm. These components are directly mounted on the door reinforcement frame and are equipped with drillings of 5.2 mm spaced at a 25 mm pitch, ensuring secure installation. Constructed from zinc-plated steel, the rails offer durability and resistance to corrosion, while their dimensions include a height of 18 mm and depth of 18.6 mm. The fixing centers are spaced at 250 mm, allowing for adjustable height every 25 mm on the door reinforcement frame, thus accommodating various installation requirements. This product comprises two cross rails and includes essential fixing elements, making it suitable for multi-purpose applications. The designation code is NSYSDCR4.

The reversing contactor is designed for integration into control systems, enabling motor starters for various applications. With a rated operational current of 12 A at 440 V AC in AC-3 utilization category and a maximum horsepower rating of 7.5 hp at 460/480 V AC, this unit efficiently handles motor control tasks.It features a compact design, measuring 77 mm in height, 90 mm in width, and 86 mm in depth, while weighing 0.697 kg. The product operates within an ambient temperature range of -40 to 60 °C, and up to 70 °C with derating, ensuring reliable performance across varied environments. The contactor is capable of withstanding mechanical vibrations and shocks, rated for 10 Gn when open and 15 Gn when closed.Certified by multiple standards, including UL, CSA, and IEC, this contactor meets stringent safety and operational guidelines. The device is equipped with screw clamp terminals for easy connections and has a minimum switching current of 5 mA for signaling circuits. It is compliant with environmental regulations, including RoHS and REACh, enhancing its sustainability profile.

The TeSys Deca Relay is a robust control relay designed to handle a variety of electromagnetic loads. With 5 contacts (3 normally open + 2 normally closed), it can manage up to 10A at a voltage of 690V. This relay operates on a 48V AC control circuit, making it suitable for both AC and DC applications. The TeSys Deca Relay is compact, measuring just 45mm in width, and can be easily mounted on a 35mm DIN rail or fixed using screws. It is designed to operate at high rates up to 180 cycles per minute and within a temperature range of -40°C to +60°C. This relay is certified under multiple standards including IEC, UL, CSA, CCC, EAC, and Marine. It is also a Green Premium product, adhering to RoHS/REACh directives.

Product Overview: The Modicon Standard Power Distribution Kit is a part of the Modicon STB range, offering a modular distributed I/O system. This kit supports hot swapping and has an illegal fallback feature, making it compatible with most major fieldbus networks. Technical Specifications: This power distribution kit allows for a 30A permissible current for 2 minutes grounding terminal. The voltage detection threshold is Dimensions and Weight: The kit has dimensions of 18.4mm (width) x 65.1mm (depth) x 125mm (height) and weighs 0.13kg. Application and Certifications: This product is suitable for packaging, bottling, assembly, distribution, textile, printing, and semiconductor machines applications. It is certified by FM Class 1 Division 2, CE, UL, and CSA. Inclusions: The kit includes STBXTS2130, spring type connectors, STBPDT2100 module, STBXBA2200 base, and STBXTS1130 screw type connectors. It supports the use with mounting base STBXBA2200. Optimal Solution: The Modicon LMC058 is an optimum solution for axis control and positioning, including automation functions. It forms a part of the flexible machine control approach, a key component of MachineStruxure.

This adaptor is part of the Modicon Momentum range, an offer of controller and IP20 monoblock I/Os for distributed control architecture. The ethernet TCP/IP communication adaptor supports multidrop and star network topology. It offers shielded twisted pair cable transmission support medium and 10/100Mbps data transmission rate. The adaptor is accessible through the peer to peer and master/slave method. It is furnished with 1 RJ45 connector for 100BASE-TX. It is an IP20 rated product. It weighs 0.07kg. The main application of this module is infrastructures and energy, material handling, simple machine control. This product is certified by CE, CSA and UL. Momentum is a flexible, modular family of components that easily snaps together and can be configured for a wide range of distributed I/O and control applications. System with 4 fundamental components that easily snap together in various combinations to form versatile control systems or sub-systems.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 32A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC and 30HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 5HP at 240VAC single phase. Contactor is supplied with a 110 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.90 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.83 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys F contactor, 3 poles (3NO), 185A/690V AC-3, for motor applications up to 90kW@400V. Contactor with no coil to allow a later selection and installation (coil to be ordered separately), it provides bolt terminals for bars or cables with lugs. For high operating rates until 2400 cycles/hour and environments until 55°C, it procures high reliability and durability. It makes installation and maintenance easy thanks to a drawer for insertion of the selected coil and a large choice of add-on blocks and accessories (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This isolated analogue output module has 4 outputs with 15bit + sign resolution. It is an output module which work with internal power supply via rack. This ruggedized product can be used in more severe environments, and operate in an extended temperature range, from -25°C to +70°C. It is furnished with 20-way connector for electrical connection. It is an IP20 rated product. It weighs 0.15kg. It is suitable for severe environments, medium to large process applications. This product is certified by IEC-Ex, ATEX, EAC, Merchant Navy, CSA, RCM, CE and UL. It meets EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).

The IEC contactor, TeSys Deca from Schneider Electric is designed for seamless integration into control systems, making it ideal for creating motor starters for a wide range of applications. This 25A inductive 3 pole IEC contactor can be mounted on DIN rail or directly to a panel, offering flexibility in installation.Key Features:25A inductive 3 pole IEC contactorRated for 15HP at 480VAC three phaseUp to 100kA SCCR with appropriate circuit breaker or fuse110VAC 50/60Hz coilOne normally open and one normally closed auxiliary contactPerfect for:Industrial motor controlAutomation systemsElectrical panels