Drives & Motors

Altivar Soft Starter ATS480 is intended to start and stop asynchronous motors supplied from 208V to 690V. It meets the requirements of the most demanding applications in normal and heavy duty. With an operational rated current of 210A in normal duty, it supplies motor from 55kW to 200kW according to mains voltage. Designed for digitization, connected, optimized to meet cybersecurity standard, it simplifies project execution and maximizes the availability of applications. Its torque control (TCS) masters acceleration and deceleration. It efficiently stops high inertia application thanks to the dynamic braking and DC injection. It could be connected in-line or inside the delta to reduce its operational current. The embedded test routine simplifies the commissioning inside the delta. Its dimensions are 320mm (width) x 277mm (depth) x 380mm (height) and it weighs 18,2kg. Altivar Soft Starter ATS480 is designed to address process, infrastructures and industrial machines. It conforms to IEC/EN60947-4-1. It is certified CE, cULus, UKCA, CCC, RCM, EAC, and Marine certified DNV, ABS, BV and CCS. Display terminals, remote mounting kit, communication modules are common with Altivar Drives. Line chokes, DNV kits are common with ATS48. ATS480 is compatible with ATS48, it has same footprint, fixing, torque control algorithm, I/O, menus… The integration of Altivar Soft Starter ATS480 in EcoStruxure drastically simplifies architecture selection, detailed design and execution in automation and electrical systems. It is a Green Premium product designed to take the environmental considerations beyond current directives and regulations, compliant with RoHS and REACH.

TeSys U standard control unit to be inserted in power bases LUB12, LUB32, LUB38 to form a TeSys U starter controller, for 3-phase motor applications up to 0.09kW@400V. It provides full protection to motors with a rated current Ir 0.15-0.6A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). To be used with a 110-240V AC / 110-220V DC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

The TeSys Island Direct Starter is a high-performance motor control solution designed for industrial applications. It is rated at 15A at AC-1 and 9A at AC-3, with a maximum power of 4kW@400V / [email protected] starter offers comprehensive protection functions including thermal overload (setting 0.18-9A, tripping class 5-30), phase loss, phase unbalance and reversal, long start (stall), locked rotor (jam), rapid cycle lockout, and ground current detection. It also provides monitoring capabilities such as max/average voltages and currents, number of switching cycles, number of faults, active and reactive power/energy when associated with a TPRVM001 voltage module.The TeSys Island Direct Starter is designed for easy installation on DIN rail and can be integrated into the TeSys island configuration. It is multi-standard certified (IEC, UL, CSA, CCC, EAC) and complies with Green Premium standards (RoHS/REACh).

The SINAMICS V20 is a robust and reliable industrial automation solution designed to handle demanding applications. With a rated power of 0.55kW, it offers a 150% overload capability for 60 seconds, ensuring optimal performance even under heavy loads. The integrated filter C3 I/O interface provides 4 DI, 2 DO, 2 AI, and 1 AQ, making it versatile for various industrial applications.This product is equipped with fieldbus USS/MODBUS RTU communication protocols, ensuring seamless integration into existing systems. It also features built-in BOP protection and has a compact size of A 90x150x146 (WxHxD), making it suitable for installation in confined spaces. With an IP20/UL rating, it ensures reliable operation in various environmental conditions.

The SIRIUS Motor Starter M200D Technology Module Reversing Starter is an advanced electronic switching AC-3 motor starter designed for applications requiring reversing capabilities. It offers a power rating of 0.75KW / 400 V and a current range of 0.15 A to 2.00 A, making it suitable for a wide range of industrial applications. The starter features electronic overload protection to ensure safe operation in the event of an overcurrent condition. It also incorporates a THERMOCLICK/PTC thermistor with brake contact for enhanced temperature monitoring and control. This motor starter is equipped with 4 DI / 2 DO Han Q4/2 - Han Q8/0 connectors, allowing for easy integration into various industrial automation systems. It can be manually operated on-site or via a key-operated switch using the communication module 3RK1305*. The SIRIUS Motor Starter M200D Technology Module Reversing Starter is compatible with PROFIBUS and PROFINET networks, making it an ideal choice for industrial automation applications.

The SIRIUS soft starter is designed to provide reliable and efficient motor control across various industrial applications. With a rating of 12.5A and a capacity of 5.5 kW at 400V, this device ensures smooth operation while maintaining optimal performance.Key Features:AC voltage range: 200-480VTemperature rating: 40°CScrew terminal connections for easy installationThermistor motor protection to safeguard against overheating

This head for selector switch is a separate component of the range of pendant control stations Harmony XAC. It has a dark grey plastic bezel. It is supplied with key operated knob (key n° 455). It features 2 positions maintained, at 90°. Its wide range of operating temperatures from -25°C to 70°C allows versatility in usage of product. It is easily installed and replaced on XAC pendant control stations in diameter 22.5mm cut-out. It is impact resistant, dust resistant, water resistant and vibration resistant thanks to its IP65. It weighs 20g. It is IEC 60947-5-1, UL 508 and CSA C22.2 n° 14 compliant.

The PSR3-600-70 softstarter boasts a maximum operational current of 3.9 A, with an operating voltage range spanning from 208 to 600 V AC. The control voltage is set between 100 and 240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop via a voltage ramp, with built-in bypass for easy installation and energy efficiency. A RUN signal is available from a relay output in NO (normally open state). The start/stop ramp and time can be easily adjusted using three potentiometers on the front. This softstarter is often used in combination with a manual motor starter (MMS) from ABB, and mechanical connection kits are available. Fieldbus communication is another popular option, enabled by an external adaptor and a Fieldbus plug. PSR is part of our compact range of softstarters, offering basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3 to 105 A and can handle up to 100 starts per hour. Common applications include pumps, fans, compressors, and conveyors.

The Schneider Electric Altivar 340 Variable Speed Drive is an advanced, heavy-duty solution that can handle demanding applications in various industries. This drive is capable of feeding both synchronous and asynchronous motors in open and closed loop control, making it a versatile choice for diverse industrial needs.The Altivar 340 is designed to withstand harsh conditions such as vibration, shock, non-conductive dust, and high temperatures up to 60°C. It integrates Modbus serial line communication protocols as standard, ensuring seamless integration with existing systems.With a rated power of 2.2kW and a voltage range from 380V to 480V AC, this drive is suitable for applications requiring robust performance and reliability. It weighs 1.8kg and has dimensions of 85mm wide, 270mm high, and 232.5mm deep.The Altivar 340 conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions), IEC 60721-3, IEC 61508, IEC 13849-1. It is also CE, UL, CSA, and TÜV certified.This drive can be mounted in a vertical position (+/- 10°) on a panel due to its four fixing holes. It is fully integrated into Schneider Electric’s EcoStruxure Machine through DTM, allowing for easy configuration, control, and diagnosis using the SoMachine and SoMove software.The Altivar 340 is designed with environmental protection in mind, complying with directives such as RoHS. It is also eco-friendly, contributing to sustainable industrial practices.

The SINAMICS G120 Power Module PM250 is a robust solution designed to handle high overload conditions. It delivers an impressive power output of 15KW for 200% 3s, 150% 57s, and 100% 240s, with an ambient temperature range from -10°C to +50°C. This module is also capable of light overload conditions, delivering 18.5KW for 150% 3s, 110% 57s, and 100% 240s with an ambient temperature range from -10°C to +40°C.The module is compactly designed with dimensions of 512 x 275 x 204 (HxWxD) and comes without a filter, regeneration possibility, control unit, and BOP. It offers IP20 protection, making it suitable for various industrial applications.

This product is part of the Lexium 52 & Motors range, an offer of standalone servo drives for PacDrive 3. The single drive features SERCOS III physical interface. It offers 4 digital inputs and 2 digital outputs. It is a single drive with a rated supply voltage of 208V to 480V, a continuous output current of 13A and a continuous power of 7kW. It is furnished with connector terminals for electrical connection. It is an IP20 rated product. It weighs 5kg. It is suitable for general machine control, packaging machine automation and material handling applications. This product is certified by CE. It meets EN/IEC 61800-3 standards. This product is compatible with servo motor SH3 (100mm, 4 motor stacks), servo motor SH3 (140mm, 2 motor stacks) and servo motor SH3 (140mm, 3 motor stacks). Lexium 52 provides an ideal counterbalance to the Lexium 62 multi-axis servo system, making the PacDrive system one of the most flexible motion control solutions. Lexium Stand alone servo drives from 0.4kW and 7kW for PacDrive based automation solutions.

The SINAMICS G120 Power Module PM240-2 is equipped with a built-in CL. A filter and braking chopper for 3AC380-480V +10/-20% output, providing high overload capabilities up to 15KW. This module features a compact design of 472 x 200 x 237 (HxWxL) dimensions and offers FSD protection with an IP20 rating without the need for a control unit or panel. It is approved for CU firmware-version v4.7 HF8 and can operate in ambient temperatures ranging from -20 to +50°C (High Overload) and -20 to +40°C (Low Overload).

The SINAMICS V90 PROFINET 1/3 AC 200V is a high-performance servo drive designed for precise motion control in various industrial applications. This drive offers seamless integration with PROFINET, ensuring efficient communication and control. It operates with an input voltage range of 200-240 V 1/3-phase AC, providing flexibility and compatibility with different power systems. The drive supports a motor power of 0.2 kW, making it suitable for small to medium-sized applications.With a compact size of 45x170x170 mm, the SINAMICS V90 is easy to install in space-constrained environments. It features an IP20 degree of protection, ensuring reliable operation in standard industrial conditions. The drive is compliant with RoHS directive and has a REACH Art. 33 duty to inform, making it an environmentally responsible choice.Designed for long-term use, the SINAMICS V90 has a product lifecycle status of PM400, with an announcement of product phase-out effective from 01.10.2025. This servo drive is part of the SINAMICS V90 family, known for its robust performance and reliability. It is suitable for applications such as packaging machines, textile machines, and other automated systems requiring precise motion control.

PSR softstarter - The compact rangeThe PSR softstarter range is a simple yet reliable starting solution that utilizes only the most basic of soft starting features: soft start and stop. It performs well in applications requiring many starts per hour and is perfect for installations where you need to save space.Main benefits* Small and compact starting solution* Can perform many starts per hour* Reduce energy loss at full speed with built-in bypass.Main features* Rated operational current: 3 to 105 A* Operational voltage: 208–600 V AC* Control supply voltage: 24 V AC/DC or 100–240 V AC.

The SIRIUS soft starter, model S3, is designed for efficient motor control in various industrial applications. With a rating of 55 kW at 400 V, it offers reliable performance and versatility.This device features spring-loaded terminals for easy installation and maintenance. It supports AC voltage ranging from 200 to 480 V and DC voltage from 110 to 230 V, making it compatible with a wide range of power sources.

The SINAMICS V20, model 1AC230V, is a robust industrial automation solution designed for applications requiring a reliable and efficient power source. With a rated power of 0.25 kW and the ability to handle up to 150% overload for 60 seconds, this product offers exceptional performance under demanding conditions. Its unfiltered I/O interface provides seamless connectivity with 4 DI, 2 DO, 2 AI, and 1 AQ, ensuring smooth communication between devices. The SINAMICS V20 is equipped with a fieldbus that supports both USS and MODBUS RTU protocols, enabling flexible integration into various industrial control systems. It features built-in BOP protection for enhanced safety, and its compact size of 68x142x108 mm (WxHxD) makes it suitable for space-constrained environments. The product is also designed to comply with IP20 and UL open standards, ensuring reliable operation in a wide range of industrial settings.

SINAMICS g120c rated power 1,1KW with 150% overload for 3 sec 3AC380-480v +10/-20% 47-63HZ unfiltered i/o-interface 6di, 2do,1ai,1ao safe torque off integrated fieldbus PROFIBUS-dp protection IP20/ ul open type size fsaa 173x73x155(hxwxd) external 24v

ABB's PSTX105-600-70 Softstarter is a versatile and reliable solution for motor starting applications. With a rated maximum operational current of 105 A and an operating voltage span from 208...600 V AC, it offers a wide range of compatibility for various motor sizes. The softstarter features a three-phase control soft start and stop through a voltage or a torque ramp, ensuring smooth and efficient operation. It also includes built-in bypass for easy installation and energy saving. The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning, making it an all-inclusive solution for your motor control needs. With a detachable full graphic display featuring IP66 and 4x outdoor rating, the PSTX offers a user-friendly interface for easy operation and monitoring. It also supports multiple communication options including hardwire inputs, programmable digital inputs, Modbus RTU, and optional ANYBUS modules with various protocols such as Profinet, Profibus, Modbus TCP, Ethernet IP, and others. The PSTX is a comprehensive alternative for any motor starting application, suitable for medium to large-sized three-phase motors with nominal currents from 30...1250 A inline connection or 52...2160 A inside delta connection. Typical applications include pumps, fans, compressors, and conveyors.

The Lexium 52 Servo Motor is designed for high-speed applications with a maximum mechanical speed of 6000 RPM. It features a 4-pole design and is equipped with an absolute multi-turn SinCos Hiperface® encoder, providing 128 periods speed feedback resolution. The motor has a rated supply voltage of 115V to 480V, a continuous stall current of 6.6A, and a continuous power of 2400W.The shaft dimensions are 19mm (diameter) x 40mm (length), and it is furnished with rotatable right angled connectors for electrical connection. The motor is IP54 and IP65 rated, making it suitable for a wide range of industrial applications. The length of the product is 240.5mm, and the centering collar dimensions are 3.5mm (depth) x 95mm (diameter) with a 115mm mounting hole.The Lexium 52 Servo Motor is compatible with PacDrive 3 for motion centric machines and supports 100mm international standard flange mount with a natural convection cooling system. It is an ideal counterbalance to the Lexium 62 multi-axis servo system, making the PacDrive system one of the most flexible motion control solutions.Lexium Stand alone servo drives from 0.4kW and 7kW are available for PacDrive based automation solutions, providing a wide range of power options to suit various industrial applications.

The SINAMICS g120c, featuring a rated power of 3.0 KW, offers a robust overload capability of 150% for 3 seconds. This drive system is designed to operate at 3AC380-480V with a voltage tolerance of +10/-20%, catering to a frequency range of 47-63 Hz. It comes equipped with an integrated filter class A I/O interface, providing six digital inputs (DI), two digital outputs (DO), one analog input (AI), and one analog output (AO). The system incorporates the Safe Torque Off feature for enhanced safety and is PROFINET-pn compatible for seamless communication. It boasts a protection rating of IP20/ UL, ensuring reliable performance in various industrial environments. The open type design of size FSA 196x73x225.4 (HxWxd) allows for easy installation and maintenance. Powered by an external 24V supply, this drive system is a versatile solution for a wide range of industrial applications.