PLCs

This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 32A. This Altistart 01 can be used for a motor rated power up to 7.5kW or 10hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

This product is part of preventa XPCMC configurable safety controller range. It is a configurable safety controller. It is supplied with 24 V DC. It has 16 safety inputs. It conforms to Category 4 maximum conforming to EN 954-1/EN/ISO 13849-1, PLE safety level conforming to EN/ISO 13849-1 and SIL 3 level conforming to IEC 61508. It embeds 1 RJ45 port for a serial link communication with Modbus protocol. The transmission rate are 1200bps, 2400 bps, 4800bps, 9600bps or 19200bps. This product measures 153mm depth, 151.5mm height, and 74mm width. It weighs 0.82kg. This safety controller is designed for monitoring multiple safety functions such as emergency stop, guard monitoring, perimeter guarding, position monitoring, speed monitoring and enabling movement. This product is certified by CSA, UL and TÜV. It conforms to EN 954-1/EN/ISO 13849-1, EN/IEC 61496-1, IEC 61508, EN/IEC 60204-1, EN 1760-1/ISO 13856-1, EN 574/ISO 13851 and EN/IEC 60947-5-1 standards. The Safety controller XPSMC is configurable and addressable using software XPSMCWIN running on a PC and using a USB/RJ45 cable type TCSMCNAM3M002P to connect to the safety controller. It installs with a mounting plate for mounting on rail. Preventa XPSMC configurable safety controller is designed to provide a solution for safety applications requiring conformity to Performance Level PL e/Category 4 EN ISO 13849-1 and SIL3 EN/IEC 61508. The configurable safety controller consists of 6 variants with 16 or 32 digital inputs and 8 digital outputs and communication possibilities of Modbus RTL Serial, Profibus DP and CANopen.

TeSys F contactor, 3 poles (3NO), 330A/1000V AC-3, for motor applications up to 160kW@400V. Contactor with no coil to allow a later selection and installation (coil to be ordered separately), it provides bolt terminals for bars or cables with lugs. For high operating rates until 2400 cycles/hour and environments until 55°C, it procures high reliability and durability. It makes installation and maintenance easy thanks to a drawer for insertion of the selected coil and a large choice of add-on blocks and accessories (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

This product is part of the Modicon M580 range, an offer of Programmable Automation Controllers (PAC) and safety Programmable Logic Controllers (PLC) with built-in Ethernet. This communication module has 3 ports. It is integrated with 3 Ethernet RJ45 connectors. Communication services are bandwidth management, FDR server, Modbus TCP I/O scanner and messaging, EtherNet/IP I/O scanner and messaging, embedded 4-port switch, RSTP support, SNMP network administrator, embedded multiport switch etc. It is a communication module with a current consumption of 555mA, works with internal power supply. It is an IP20 rated product. It weighs 0.2kg. It is suitable for medium to large process applications. This product is certified by CE and UL. It meets EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. This connection sub-base is compatible with BMEXBPxxx - Ethernet + X-bus rack. The benefits of Modicon M580 are reduce time to market, improve reliability and sustainability, improve productivity with high performance and increase operating profitability due to improved access to data.

This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. It has additional solid-state output for communication with PLCs about safety status of your process.

This Modicon ABLP regulated switch mode power supply (SMPS) supplies direct current voltage. It has a rated input of 100V to 240V AC, a rated output current of 10A at 24V DC and a rated power of 240W. It is ideal for supplying DC voltage necessary for automation equipment designed for applications in industrial, commercial and residential applications such as conveying, packaging, control, food & beverage, mining, oil & gas and water. It provides a protection against overloads and short-circuits with automatic restart after the source of overload/short-circuit has been corrected It has LED diagnostics indicator available in the front for troubleshooting instantly. Its width is 190mm, its height is 50mm, its depth is 93mm. It weighs 0.850kg. It is certified with CB-Scheme, cULus Listed, cURus recognized, RCM and EAC. It is a power supply for commercial use, panel mount; It is compatible with ABLPA02 mounting plate. It installs on panel on side or on base with mounting plate fixing by screw. ABLP power supplies bring energy to your automated systems. ABLP power supplies are designed for simple and repetitive machines, dedicated power supplies are particularly quality/price competitive due to their simplicity and compactness. The main applications to use Modicon ABLP power supply are lifts, display panels, escalators, carwash, foodstuff ovens, etc.

This Multi9 C60SP is a low voltage miniature circuit breaker (MCB). It is a 2P circuit breaker with 2 protected poles, 40A rated current and C tripping curve. The rated short circuit breaking capacity goes up to 10kA at 415VAC conforming to EN/IEC 60947-2 standard and 10kA at 415VAC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 240VAC. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 6kV. The product can be clipped on a DIN rail. Its width is 4 pitches of 9mm. Pollution degree is 3. The product colour is light grey (RAL7035). The dimensions are (W) 36mm x (H) 81mm x (D) 72mm. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -30°C to 70°C. The storage temperature is -40°C to 80°C.

The Schneider Electric Multi9 C60SP is a state-of-the-art miniature circuit breaker (MCB), specifically designed to offer superior protection against electrical hazards. It is a 3P circuit breaker with a rated current of 6A and a D tripping curve, ensuring optimal performance under various conditions. This MCB boasts a high short-circuit breaking capacity of up to 10kA at 415VAC, complying with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It is UL1077 and IEC/EN 60947-2 certified, ensuring its reliability and safety. The Multi9 C60SP is an ideal choice for original equipment manufacturers (OEM) and control panel builders due to its robust design and high electrical endurance of up to 10000 cycles. It also features a mechanical endurance of up to 20000 cycles, making it a reliable and durable solution. This MCB is designed to fit on a DIN rail with a width of 6 pitches of 9mm. Its pollution degree is 3, and the product color is light grey (RAL7035). The dimensions are (W) 54mm x (H) 81mm x (D) 72mm. The Multi9 C60SP offers a high degree of protection with an IP20 rating on its terminals, as per IEC/EN 60529. It operates at temperatures ranging from -30°C to 70°C and can be stored at temperatures ranging from -40°C to 80°C.

Modicon M262 logic/motion controllers are designed for performance-demanding machines, IIoT-ready and combine logic, motion and safety control applications. TM262L10MESE8T is specialized in the logic control of 4 fast digital inputs and 4 fast digital ouputs. It controls motion with independant axis in EtherNet/IP. This logic controller embeds two Ethernet-based networks (EtherNet/IP, Modbus/TCP), one serial port (Modbus, ASCII, Machine Expert protocols). Modicon M262 are logic/motion controllers with embedded cloud connectivity, figuring cybersecurity capabilities, supporting monitoring, analytics and predictive maintenance. It is powered with a non-isolated 24V DC power supply, has a built-in overload protection, embeds a dual-core processor, reaches a 5ns/instruction performance. This logic controller has one communication bus (Ethernet, CANopen), one IO bus, one IO port. It measures 125mm width, 90mm depth, and 100 mm height. It weighs 0.665kg. This controller is designed for machinery requiring integrated IIoT connectivity or encrypted communication. Certified with CE, cULus HazLoc, RCM, EAC, Achilles L2, EU RO Mutual, Conform to UL 61010-1/-2-201, CSAC22.2 No. 61010-1/-2-201, ANSI/ISA 12-12-01, EN 61131-2. This controller is compatible with TMS CANopen smart communication module, Modicon TM3 IO expansion modules, and configured by EcoStruxure Machine Expert. Modicon M262 logic controller installs on 35mm DIN rail with Clip-on locks. Modicon M262 logic/motion controllers are the IIoT-ready controllers for performance machines. Modicon M262 logic/motion controllers embed Industrial Internet of Things (IIoT) protocols and encryption to provide direct cloud connectivity & digital services.

The Schneider Electric Altivar Process ATV600 is a robust variable speed drive that can handle a wide range of applications. It features 3 built-in RJ45 communication ports, 1 Ethernet port, and 2 serial ports for seamless connectivity. This drive operates at a rated supply voltage from 380V to 480V AC, providing up to 30% energy savings when on standby due to its innovative 'Stop and Go' operation.The Altivar Process ATV600 is suitable for motors with power ratings up to 132kW / 200hp for applications requiring slight overload (up to 120%). It also supports significant overload (up to 150%) for applications requiring higher power. With dimensions of 320mm wide, 852mm high, and 390mm deep, this drive weighs 82kg.This variable speed drive is particularly focused on fluids management processing and energy saving. It offers extensive flexibility in water and wastewater, mining, minerals and metals, oil and gas, and food and beverage applications. Accessories such as fan kits and graphic display terminals are available depending on the drive rating.The Altivar Process ATV600 is designed to be mounted in a vertical position (+/- 10°) on a wall. This innovative drive meets the major needs of process and utilities in terms of equipment efficiency and total cost of ownership by supporting energy management, asset management, and overall process performance.

The TeSys F AC Coil, designed for 110-115V and operating at frequencies of 40-400Hz, is a low consumption component that provides high tolerance to voltage drops. This coil is compatible with TeSys F 3-pole and 4-pole contactors LC1 F185, FG185, and F225.The TeSys F AC Coil operates within a voltage range of 0.85-1.1 Uc and can withstand environments up to 55°C. It offers high operating rates for the contactor, capable of handling up to 2400 cycles per hour.This coil is RoHS/REACh compliant, ensuring it meets Green Premium standards.

The CT-ERE is a single-function electronic time relay from the CT-E timer range. It provides an ON-delay (delay on make) function with a time range from 0.1 s to 10 s. This time relay operates with a rated control supply voltage of 24 V AC / DC / 220 - 240 V AC and has a 1 c/o (SPDT) output rated at 250 V / 4 A.

The BMH Lexium 32 Servo Motor is a powerful addition to Schneider Electric's lineup of motion servo drives. This medium-inertia motor boasts a maximum mechanical speed of 6000 RPM, ensuring smooth and efficient operation in high-load applications.Equipped with a SinCos Hiperface® encoder (32768 points/turn x 4096 turns), this servo motor provides automatic transmission of data from the motor to the servo drive. The motor's 10-pole design and rated supply voltage of 480V ensure reliable performance in a variety of industrial settings.With a continuous stall current of 3.15A and a continuous power of 1.76W, this servo motor is designed to handle demanding tasks with ease. The untapped shaft and holding brake add an extra layer of control and precision to your machinery.This IP54-rated product features a compact design with dimensions of 170.3mm (Length) x 100mm (Width), making it easy to integrate into existing systems. The motor's rotatable right-angled connectors allow for flexible electrical connections, while the 4-point axial mounting flange ensures secure installation.The BMH Lexium 32 Servo Motor is compatible with Lexium 32 servo drives and supports international standard 100mm flange mount with a natural convection cooling system. The motor's neodymium iron boron (NdFeB) magnets and RAL 9005 opaque black paint protective coating ensure durability and resistance to harsh environmental conditions.Please note that cables and connectors are not included with this product. Order them separately for complete system setup.

The Schneider Electric TeSys GV motor circuit breaker, designed for 3-phase motor applications, offers a robust thermal-magnetic protection mechanism with a thermal setting range of 1.6-2.5A and magnetic tripping at 13xIn. This high breaking capacity device, rated at Icu 100kA@400V, is equipped with spring terminals for easy connection. The start-stop control is guaranteed for 100,000 cycles AC-3, ensuring reliable operation. The TeSys Deca Manual Starter and Protector is certified to multiple international standards, including IEC, UL, CSA, CCC, EAC, Marine, and ATEX. It also complies with Green Premium standards (RoHS/REACh).

The SENTRON Switch Disconnector 3LD Main Switch is a robust and reliable electrical component designed for high-performance applications. With a 4-pole configuration and an Iu rating of 16 A, this switch ensures efficient power distribution while maintaining safety standards. The operating power is rated at 23 A at 400 V, with a maximum capacity of 7.5 kW, making it suitable for various industrial environments.Featuring a front-mounted rotary operating mechanism, this switch offers easy accessibility and operation. Its black color provides a sleek appearance while blending seamlessly into any industrial setting. The 4-hole mounting of the handle ensures secure installation and convenient handling during maintenance operations.

SUPPLEMENTARY PROTECTOR,3P,4A,CURVE A Supplementary Protector, UL1077 Rated, IEC Mini Circuit Breaker, 3 Pole, 4 Amps, 480 VAC, Trip Characteristic Curve A, 54mm Width, 70mm Depth, UL File E116386 in Vol. 1 Sec. 2

SIEMENS LOW VOLTAGE 3VA IEC MOLDED CASE CIRCUIT BREAKER WITH THERMAL - MAGNETIC TRIP UNIT. 3VA11 FRAME WITH STANDARD (CLASS S) BREAKING CAPACITY. 160A 3-POLE Icu: (7KAIC AT 690V) (36KAIC AT 415V). TM240 TRIP UNIT WITH ADJUSTABLE Ir ADJUSTABLE Ii. SPECIAL FEATURES: CONNECTION WITH BOX TERMINAL / STEEL WRAP AROUND LUG. DIMENSIONS (W x H x D) IN: 3 x 5.1 x 3.5.

SCALANCE XB004-1 UNMANAGED INDUSTRIAL ETHERNET SWITCH FOR 10/100MBIT/S; WITH 4 X 10/100MBIT/S TWISTED PAIR- PORTS WITH RJ45-SOCKETS; 1 X100MBIT/S MULTIMODE GLASS LWL-PORT WITH SC-SOCKET; FOR CONFIGURING SMALL STAR- AND LINE TOPOGRAPHIES; LED-DIAGNOSIS, IP20, 24 V DC POWER SUPPLY, INCL. MANUAL

TeSys F set of power connections, for assembling pairs of 3-pole contactors LC1F225. To be used in horizontal assembling of identical contactors, for 3P changeover applications. Set of 3 pieces for bottom connections. Green Premium compliant (RoHS/REACh).

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 38A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 10HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC and 25HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 5HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 80A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 24 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.84 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.