Tools & Accessories

The NFC fuse cartridge serves as a critical component for TeSys GS switch-disconnector fuse devices, specifically designed to protect against thermal overloads and magnetic overcurrents in standard applications. With a rated current of 8 A and a maximum operational voltage of 500 VAC, this gG fuse-link ensures reliable performance. This cylindrical fuse measures 10mm x 38mm and does not include a striker to indicate when the fuse has blown. It is supplied in a set of 10 parts, making it suitable for various installation needs. The product is classified under the TeSys fuse-disconnector range and carries the designation code DF2.

The SACC-PO12MS-5CT-CM SH is a universal connector designed for reliable connectivity in various applications. It features a 5-position, shielded configuration with a straight M12 Push-Pull design and A-coding, ensuring secure connections. The external cable diameter ranges from 4.5 mm to 7.5 mm, accommodating different cable sizes.Manufactured in Germany, this connector is built with a knurl made from PA 6.6, providing durability and resistance to wear. The connector is rated for an insulation resistance of ≥ 100 MΩ and offers a nominal voltage of 48 V AC with a nominal current of 4 A. Its design allows for insertion and withdrawal cycles of at least 100 times, ensuring longevity in use.With a degree of protection classified as IP65, this connector is suitable for harsh environments. It operates effectively within an ambient temperature range of -40 °C to 85 °C, making it versatile for various temperature conditions. Additionally, it meets fire protection standards according to DIN EN 45545-2, ensuring safety in rail vehicle applications.

The Thalassa PLA version offers a versatile solution for a variety of applications. Designed with a sealed top and an open bottom, it facilitates easy access and installation. The enclosure measures 1500mm in height, 750mm in width, and 320mm in depth, and is constructed from polyester reinforced with fiberglass, ensuring durability and suitability for harsh environments. With a grey finish (RAL 7035), it includes two side parts, a removable plain front door, a rear panel, and a plinth. The door opens up to 120° and features a four-point locking mechanism with a handle equipped with a 5mm double-bar insert, enhancing security and accessibility for maintenance. The door and rear panel can be detached for effortless equipment servicing. The enclosure provides a high level of protection against various hazards, including fire, impact, dust, and moisture, with a fire resistance rating of 960°C compliant with the IEC 62208 standard. It also carries an IK10 rating under IEC 62262 for high impact resistance and an IP54 rating per IEC 60529, offering substantial safeguards against dust and water ingress. Class II electrical insulation is integrated to prevent electric shocks and facilitate entirely insulated setups. Further, it has been UL certified and can be stored in ambient temperatures ranging from -35°C to 90°C without any degradation in performance.

STEP 7 Professional V17 is designed for users upgrading from versions V11 through V16 and includes support for both Combo Floating Licenses and single licenses. The software encompasses comprehensive engineering capabilities within the TIA Portal, facilitating streamlined processes for automation systems. This upgrade package includes software, documentation, and a license key available for download. It supports nine languages, including German, English, and Chinese, while additional languages like French and Spanish can be downloaded. The installation is compatible with Windows 10 and Windows Server 2016/2019, ensuring a broad application range. Notably, this version integrates various essential functions, including motion, analysis, position, diagnosis, evaluation, and simulation capabilities, enhancing the overall automation experience. Although it does not support safety functions, it is equipped with integrated communication and configuration functions, making it versatile for diverse operational needs. For optimal use, the software abides by IEC 1131-3 standards, offering multiple programming language editors such as Ladder Diagram (LD), Structured Text (ST), and Instruction List (IL). This flexibility caters to various programming preferences and enhances user interaction.

The Siemens IWLAN Mobile Panel Battery is a rechargeable power source designed for mobile applications. This panel is equipped with advanced wireless connectivity options, making it an ideal choice for users who require reliable and efficient power on the go.This battery panel boasts a robust design that ensures durability and longevity. It is compatible with various devices, providing versatility and convenience in different scenarios. The rechargeable feature adds to its practicality, as it allows for multiple uses without the need for frequent replacements.For further information regarding quantity and content, please refer to the technical data provided. This includes details about the battery's capacity, charging time, and compatibility with different devices.

The ATMR series fast-acting fuses are optimized for branch-circuit protection, making them suitable for applications where short circuit currents can exceed 10,000 amperes. With a rated voltage of 600V for both AC and DC, these fuses are particularly effective in controlling circuits and transformers. The fuse's design includes rejection dimensions that prevent the use of lower-rated fuses, ensuring reliability and safety.Weighing only 0.02 lb and measuring 1.5 in in length with a diameter of 0.41 in, the fuse is compact yet powerful. The mounting method is clip-based, and it features a fast-acting characteristic, providing current-limiting protection for general circuit applications. Built with tin-plated copper terminals, the fuse meets ROHS compliance standards.For applications requiring dependable circuit protection, the ATMR fast-acting fuses are an optimal choice, delivering a maximum breaking capacity of 200 kA.

The crimp termination inserts are specifically engineered for female connections and are made from durable polycarbonate (PC) material with a RAL 7032 (pebble grey) finish. They are designed to support a rated current of 10 A and are compatible with conductor cross-sections ranging from 0.14 to 2.5 mm². The size designation is 16 B, and these inserts feature a total of 72 contacts, including a PE contact for enhanced grounding.These inserts are suitable for various industrial applications, complying with standards such as EN 60664-1 and IEC 61984. They have a rated voltage of 250 V and are rated for impulse voltages up to 4 kV, making them reliable for demanding environments. The operational temperature range is -40 to +125 °C, ensuring performance across a wide spectrum of conditions.With a minimum mating cycle endurance of 500 cycles, these inserts feature a pollution degree of 3 and meet the necessary approvals, including DNV GL and UL/CSA certifications. For optimal performance, crimp contacts must be ordered separately. The product is manufactured in Romania and weighs 66 g.

The device marker, designated as LS-EMLP (11X9) YE, is designed for versatility in labeling applications. It features a sheet format with a vibrant yellow color (RAL 1018) and allows for direct laser marking. Each marker has a lettering field measuring 11 mm in width and 9 mm in height, accommodating a total of 255 individual labels.The adhesive mounting type ensures secure placement, while the material is composed of ABS, which is free from silicone and halogen, complying with various standards including DIN EN 61010-1 for wipe resistance. It operates effectively across a temperature range of -20 °C to 85 °C and is recommended to be stored under conditions of 23 °C and 50% relative humidity. For optimal preservation, it should be kept in a dry and dark environment within the original packaging.Each marker weighs 36.6 g, and its dimensions are 11.00 mm in width, 9.00 mm in height, and 0.85 mm in depth. The foil strength is rated at 800 µm, with adhesive strength of 50 µm, utilizing an acrylic adhesive for durability.

The SD-FLASH-2GB-EV-EMOB serves as a vital storage medium for program and configuration data, enabling seamless integration with the PLC's file system. With a capacity of 2 GB, it accommodates essential application programs and files, along with a license key specifically for E-Mobility function block libraries. Manufactured in Germany, this product is part of the CHARX control professional family. It operates within a supply voltage range of 2.7 V DC to 3.6 V DC, with a typical current consumption of approximately 50 mA and a maximum power dissipation of 0.165 W under nominal conditions. The ambient temperature for operation ranges from -40 °C to 85 °C, ensuring reliability across diverse environments. For optimal performance, it is crucial to consider the specifications and compatibility with your controller. Additionally, a version without a license is available for users who do not require function block libraries.

The MINI MCR-2-I-I-ILP-PT operates as a 1-channel input loop-powered isolator designed for the electrical isolation of analog signals, facilitating a direct signal transmission from input to output at 0(4) mA to 20 mA. The unit employs a push-in connection method, ensuring quick and reliable installation. Manufactured in Germany, this isolator features 2-way electrical isolation between input and output, enhancing signal integrity. It exhibits a maximum transmission error of ≤ 0.1% of the final value and a temperature coefficient of ≤ 0.002%/K, thereby maintaining accuracy across varying temperatures. The device is rated for a supply voltage range of 9.6 V DC to 30 V DC, negating the need for an external power source. With a compact design measuring 6.2 mm in width, 109.81 mm in height, and 119.2 mm in depth, it is suitable for DIN rail mounting in diverse environments. It operates effectively within an ambient temperature range of -40 °C to 70 °C and has a permissible humidity range of 5% to 95% (non-condensing). The device complies with EMC directives and exhibits a degree of protection rated at IP20.

The test terminal strip, designated as PTRE 6-2/23, operates at a nominal voltage of 400 V. It features a push-in connection method and is designed for single-level mounting on a DIN rail. The rated cross section is 6 mm², accommodating conductor cross sections ranging from 0.5 mm² to 10 mm². Its dimensions are 220.1 mm in width, 99.7 mm in height, and 56.5 mm in depth, with additional depth options of 61.8 mm and 69.3 mm for different DIN rail setups.This terminal strip is constructed from gray PA material, with a flammability rating of V0 according to UL 94, making it suitable for various applications, including those in rail vehicles where fire protection standards (DIN EN 45545-2) apply. The product supports a maximum load current of 30 A when using a 6 mm² conductor cross section, and it ensures reliable performance across a wide temperature range from -60 °C to +125 °C.Additional specifications include a maximum power dissipation of 1.31 W under nominal conditions, and it provides 23 positions with a pitch of 8.2 mm for connection, resulting in a total of 46 connections. The terminal strip’s construction allows for efficient operation under the standard IEC 60947-7-1.

This junction box, designated as D PX A 360X177X145, is designed with two wiring levels and is constructed from glass-fiber-reinforced polyester enhanced with graphite. The enclosure measures 360 mm in width, 177 mm in height, and 145 mm in depth. It features a screw-on cover for secure locking. With a degree of protection rated at IP66, this product is suitable for use in harsh environments. It operates effectively within a temperature range of -55 °C to 127 °C. Compliance with environmental standards includes a commitment to no hazardous substances exceeding threshold values, ensuring its suitability for environmentally conscious applications. The junction box is prepared for direct installation on a DIN rail, accommodating a maximum assembly length of 285 mm and a maximum DIN rail length clearance of 333 mm. It is also halogen-free, adding to its environmental safety credentials.

This product is part of the Lexium 32 range, an offer of connection accessories for Lexium 32 and motors. This control cable is an accessory of servo motors to connect the servo drive. The length of this cable is 50m. It is furnished with M23 and RJ45 connectors for electrical connection. The cable composition is 3 x (2 x 0.14mm²) + (2 x 0.34mm²). It weighs 3.1kg. This range is compatible with Lexium 32. Lexium 32 is a servo drive range provides drive and motor combination that has exactly the right power, performance and functionality. The Lexium 32 range of servo drives includes four servo drive models with power ratings from 0.15kW to 11kW and the servo motor ranges BMH and BSH series.

The SACC-M12MS-8QO SH ETH data connector is designed for Ethernet applications, supporting a transmission speed of 1 Gbps. With an 8-position configuration, this connector is halogen-free and shielded, ensuring reliable data transfer in various environments. Constructed with a zinc die-cast knurl that is nickel-plated, it provides durability and corrosion resistance. The external cable diameter ranges from 5 mm to 9.7 mm, accommodating different cable sizes. The connector's straight cable outlet configuration allows for easy installation. It meets rigorous standards, including fire protection requirements for rail vehicles as per DIN EN 45545-2, and offers a degree of protection rated at IP65. The ambient operating temperature for both male and female connectors spans from -40 °C to 85 °C, making it suitable for harsh conditions. The unit weighs approximately 39.321 g including packing, with a tightening torque specification of 5 Nm for the pressure nut. This product also features an insulation resistance of ≥ 100 MΩ and a nominal voltage of 48 V AC, allowing for reliable connections even in demanding situations.

The DFK-PC 5/ 8-GF-SH-7,62 is a feed-through header designed for efficient electrical connectivity. With a nominal cross section of 6 mm² and a maximum nominal current of 41 A, it is suitable for various applications requiring high current handling. The component is rated for a voltage of 630 V under standard conditions, ensuring reliable performance in demanding environments.Constructed with a tin contact surface, this header features a male connector configuration and offers 8 potentials arranged in a single row. It includes 8 positions, each capable of accommodating 3 solder pins per potential, with a pin layout that allows for linear pinning. The pitch of 7.62 mm facilitates easy integration into existing systems.For mounting purposes, the device employs wave soldering techniques and is designed for screw locking, adding to its stability during operation. It is packaged in cardboard for efficient storage and transport. The header is compliant with WEEE/RoHS regulations and is constructed to minimize whisker formation as per IEC 60068-2-82/JEDEC JESD 201 standards.This product is also characterized by its durability, with an operating temperature range from -40 °C to 100 °C, making it suitable for a variety of environments. The housing is green (6021) and made from PA, with a comparative tracking index (CTI) of 600, ensuring safe and reliable operation.

The SACC-MINFS-3CON-PG13 is a universal connector designed for a 3-position configuration, equipped with a straight socket utilizing a 7/8"-16UNF A-coded screw connection. Constructed from zinc die-cast material that is nickel-plated, this connector ensures durability and reliability in various applications.It supports an external cable diameter ranging from 10 mm to 12 mm and features a Pg13.5 cable gland. The connector's dimensions include a width and height of 27 mm, and a length of 84 mm, while the housing diameter is also 27 mm. It operates effectively within an ambient temperature range of -25 °C to 85 °C.For connection, it allows for both ferrule and non-ferrule wiring, accommodating a connection cross-section from 0.34 mm² to 1.5 mm² (AWG 22 to 16). The connector provides a rated surge voltage of 4 kV and a nominal current of 12 A, ensuring robust performance with a contact resistance of ≤ 5 mΩ and an insulation resistance of ≥ 100 MΩ. It is rated for at least 100 insertion/withdrawal cycles and has a degree of protection rated at IP67, making it suitable for various industrial environments.

This set comprises 20 symmetrical DIN rails, specifically engineered for compatibility with various PanelSeT enclosures, including the CRN, S3D, S3X, and PLM models. Each rail features a nominal length of 500mm and a real length of 450mm, with a nominal width of 35mm and a nominal height of 15mm. Constructed from zinc-coated steel with a thickness of 1.5mm, these rails are designed for multi-purpose applications. The fixing mode is implemented through a structured enclosure, with a pitch of 25mm for secure installation. Additionally, this product is recognized as a Green Premium offering, ensuring minimal use of hazardous materials, thereby contributing to sustainable practices.

The UM-ALU 4 AU45 L60 is a profile cover constructed from anodized aluminum, showcasing a width of 45.6 mm and a length of 60 mm. The external profile width measures 45.6 mm while the internal width is 42 mm, and the depth is 28.1 mm. This housing is designed for screw mounting and is suitable for various applications with an operational temperature range of -40 °C to 100 °C, contingent upon power dissipation.With an IP40 rating, this product offers protection against solid objects larger than 1 mm, but does not provide moisture protection. It accommodates a PCB thickness between 1.44 mm and 2 mm, featuring four PCB holders and a mounting type that aligns parallel to the DIN rail. The total PCB surface area ranges from 1640 mm² to 2302 mm², depending on the side elements used.Manufactured in Hungary, the product weighs 33.5 g and is packaged in a cardboard carton, ensuring safe transport and storage. The absence of ventilation openings contributes to its robust design, making it suitable for various industrial applications.

The D-SUB contact insert is tailored for PCB assembly with a shell size of 1 and consists of nine signal contacts. With an angled design, it facilitates easy installation using a 2.5 mm hole and is intended for use with the panel mounting frame VS-09-BU-DSUB-LH-B. This component is produced in Germany and is shielded to ensure reliable performance. Its rated voltage is 400 V in accordance with IEC 61076-2-101, while it supports rated currents of up to 5 A at 20 °C. The connection method employs wave soldering contacts, and the insert is constructed with a metal housing that is metal-plated, ensuring durability and robustness. The contact material is a copper alloy with a gold surface finish, providing excellent conductivity.Additional specifications include a width of 20.2 mm, height of 12.93 mm, and length of 31.19 mm. The product is rated for an ambient temperature range of -55 °C to 125 °C, and it meets overvoltage category III standards with a rated surge voltage of 1 kV. The D-SUB contact insert is also designed for a minimum of 200 insertion/withdrawal cycles, with a maximum insertion force of 3.40 N per signal contact. Its degree of protection is IP20, making it suitable for various applications.

The 3VA21 molded case circuit breaker features a three-pole configuration and an electronic trip unit (ETU320) designed for line protection. With a rated current of 63A and a notable short-circuit breaking capacity of 85kA at 415V, it is suitable for various industrial applications. The device is constructed with a high breaking capacity (Class H) and complies with IEC standards, ensuring reliable performance.Measuring 4.1 inches in width, 7.1 inches in height, and 4.2 inches in depth, this circuit breaker is designed for easy installation with its front-side connection for the main current circuit. It supports screw connections and is compatible with a nut keeper kit for secure mounting. The unit is rated for a maximum operational voltage of 690V and can function effectively within a temperature range of -25 °C to 70 °C.Additional features include an overload protection setting adjustable between 25A and 63A, and the capability to accommodate optional motor drives. The product is manufactured under the Siemens Eco Profile standards, emphasizing its environmentally responsible design.