Tools & Accessories

The TMOV34S Series thermally protected varistor is a specialized component intended for over-voltage circuit protection. Featuring a 34mm square format, this varistor incorporates a thermally activated element that disconnects the device in cases of overheating caused by excessive voltage or limited current. This design provides rapid thermal response owing to the thermal element's proximity to the varistor body.Additionally, select TMOV34S devices include a monitor lead that can be integrated with signaling circuitry, allowing for monitoring of the varistor's operational status. The integrated design not only enhances thermal response but also reduces inductance compared to traditional discrete solutions, leading to superior clamping performance during fast over-voltage transients. The TMOV34S Series is currently pending UL1449 3rd Edition approval for its innovative thermal element features. For further inquiries or alternative options, consultation with a product representative is recommended.

The NRN series fuses, rated at 250V and 300A, are classified under Class H and are designed for non-time delay applications. This product features a short circuit rating of 10kA, ensuring reliable performance under fault conditions. The fuses are compliant with the Canadian Electrical Code as Type 'P' fuses, suitable for low melting-point applications. With a mounting style of clip, the fuse utilizes copper for its connection and terminal materials, while the body is constructed from PolyTube insulating material. The dimensions include a length of 8.63 inches and a diameter of 2.13 inches, weighing 1.45 lb, which contributes to its usability in various electrical systems. The packaging dimensions include a sell pack width of 2.12 inches, a length of 8.81 inches, and a height of 2.12 inches, with a total sell pack weight of 1.52 lb.

The Pin Strip PST 1,0/ 2-3,5 is designed with a nominal cross-section of 0.5 mm² and a black housing. It supports a nominal current of 8 A, contingent upon the plug used, and operates at a rated voltage of 250 V, classified under voltage category III/2. The contact surface is tin-plated, ensuring good conductivity. This product features two potentials, a single row configuration, and two positions with a pitch of 3.5 mm. The mounting method is THR soldering, and it incorporates a linear pinning layout with a solder pin length of 3.8 mm. It utilizes the COMBICON PST 1,0 plug-in system and is packaged in cardboard. The maximum current rating is dependent on the plug type. Constructed from highly temperature-resistant plastic, this pin strip is suitable for the reflow soldering process, making it ideal for various industrial applications. The Designation Code associated with this product is PST 1,0/ 2-3,5, ensuring easy identification within its product range. Its robust design allows it to withstand demanding environmental conditions, supporting operational temperatures between -40 °C and 100 °C.

The Amp-Trap 2000® AJT fuses are designed to provide effective protection for main, feeder, and branch circuits across various load types. These fuses offer IEC Type 2 No Damage protection while occupying only half the mounting space required by 600VAC Class RK fuses. The time-delay characteristics of the AJT series are particularly beneficial for accommodating typical motor and transformer inrush currents, enhancing their current-limiting capability.Incorporating advanced material technology, the AJT fuse includes a SmartSpot visual indicator for open fuses, ensuring clear visibility of operational status. With a rated voltage of 600 V AC and 500 V DC, and an ampere rating of 350 A, these fuses are compliant with ROHS standards. Additionally, they feature a maximum interrupting rating of 200 kA and can be mounted via clip or bolted methods. The connection terminals are crafted from brass, and the insulating body material is GMG.

This limit switch body is a component of the XC Standard series, specifically designed for a wide range of industrial applications including packaging, materials handling, and machining. It incorporates 1 normally closed (NC) and 2 normally open (NO) snap action contacts, ensuring reliable performance in diverse environments.With a conventional enclosed thermal current of 6A, it operates effectively at 1.5A for 240V AC and 0.1A for 250V DC. The device is housed in a robust metal body measuring 40mm in width, 44mm in depth, and 77mm in height, and weighs 0.31kg. It is rated IP66 for dust and water resistance and IK07 for impact protection, making it suitable for harsh conditions.This fixed limit switch body is compatible with the XCKJ series and pairs with various associated heads, including ZCKE629, ZCKE67, and ZCKE619. It supports screw terminal connections and has a cable entry tapped for M20 x 1.5 cable glands. The product adheres to IEC standards such as EN 50047 and EN 50041, featuring positive opening snap action contacts that enhance machine safety.

The PCB plug-in connector is designed for reliable connections in various applications. With a pitch of 5.08 mm and a configuration of 7 poles, it allows for secure THT solder connections. This component features a solder pin length of 3.2 mm, tinned for enhanced conductivity, and comes in an orange color.Rated for a voltage of up to 300 V and a current of 18.5 A under UL 1059 standards, this connector is suitable for various power and signal applications. It is compliant with international standards such as IEC 60664-1 and IEC 61984, making it versatile for many industrial uses. The connector can operate within a temperature range of -50 °C to 100 °C, ensuring functionality in diverse environments.Constructed from PA GF insulating material, it features a high Comparative Tracking Index (CTI) of ≥ 550, ensuring safety and reliability. The connector also adheres to ROHS standards and features approvals from cURus and EAC.In terms of dimensions, it has a width of 35.56 mm, height of 15.2 mm, and a depth of 8.5 mm, totaling a net weight of 2.88 g. The design includes a 180° outgoing elbow, allowing for effective space utilization on PCB layouts.This connector is part of the OMNIMATE Signal series, and its construction allows for 25 plugging cycles, with a maximum plugging force of 10 N per pole and a pulling force of 7.5 N per pole.

This M12 female socket connector is designed for sensor and actuator applications. The product features a straight design and a connection thread compliant with M12 standards. It has a total of 4 poles, with a core cross-section of 0.34 mm², and is constructed from a PUR sheath material that is resistant to hydrolysis and microbes. The cable measures 5 meters in length and is suitable for use in cable carriers.The connector complies with IEC 61076-2-101 and has a protection degree of IP65, IP66, IP67, and IP68 when properly connected. It is rated for a maximum voltage of 250 V and a maximum current of 4 A. The operating temperature range for the housing is between -25°C and +80°C. Furthermore, this connector is designed to endure at least 100 plugging cycles and is resistant to bending cycles up to 2 million.For environmental compliance, the product is RoHS conforming and does not contain halogens. The connector's contact surface is gold-plated, ensuring reliable electrical connectivity. The designation code for this product is SAIL-M12BG-4-5.0U.

This keylock kit serves as a mechanical interlocking solution for various devices, including the Compact NSX, EasyPact CVS, and PowerPact Multistandard series. The set comprises two keylocks and one cylindrical key, identified by the profile KS5 B24 D4Z, which enhances the versatility of these devices.Notably, the compatibility range includes ComPact (ComPacT INS), ComPact (Compact INV), EasyPact (EasyPact CVS), ComPact (ComPact NSX), and ComPact (ComPact NSX DC), making it suitable for a wide array of applications. Each set contains two keylocks, facilitating efficient installation and operation.The assembly and testing operations can be completed in approximately 3.5 minutes, ensuring a straightforward setup. The product meets various regulatory standards, including compliance with EU RoHS directives, and is mercury-free, addressing environmental safety concerns.

The TRS-R series fuses provide current-limiting time-delay functionality, specifically aimed at safeguarding motors, transformers, service entrance equipment, feeders, and branch circuits. With a rated voltage of 600V AC and DC, these fuses are capable of handling inrush currents that may occur during the startup of various equipment. Featuring a time-delay characteristic, the TRS-R effectively manages harmless starting currents, ensuring reliable operation in demanding conditions. The fuse has an ampere rating of 0.6A and a breaking capacity of up to 200 kA, accommodating the high demands of modern electrical systems. Constructed with a copper terminal type and housed in a PolyTube body, this fuse's design allows for easy installation via clip mounting. Measuring 5 inches in length and 0.81 inches in diameter, this product has a weight of 0.2 lb, making it suitable for a variety of applications requiring compact overcurrent protection solutions.

The membrane keypad, designated as KP HCS T-MIC K12 C3 P9, is designed for handheld applications. It utilizes silver conduction technology, ensuring reliable operation across a temperature range of -20°C to 70°C. The keypad consists of 12 keys arranged in a 2 x 6 format, and features dome embossing with dimensions of 10 x 10 mm per key.Constructed from durable polyester, the keypad offers an adhesive mounting type for easy installation. The connecting cable measures 88.5 mm in length and has a pitch of 2.54 mm, equipped with a crimp female connector for straightforward integration. With a weight of 13.5 g, this component is suitable for various applications that require a reliable and user-friendly interface.

This product is a female crimp termination insert constructed from polycarbonate (PC) and finished in RAL 7032 (pebble grey). With a rated current of 10 A and an operational size of 16 A, it accommodates conductor cross-sections ranging from 0.14 to 2.5 mm². The insert supports up to 25 contacts and is designed for use in applications requiring durability and reliability.It operates effectively under a rated voltage of 250 V, with a rated impulse voltage of 4 kV and a pollution degree of 3. Compliance with UL and CSA standards permits a rated voltage of 600 V, ensuring compatibility with various industrial electrical systems. With insulation resistance exceeding 10, the insert is suitable for a wide temperature range of -40 to +125 °C and can endure at least 500 mating cycles.This insert is categorized under the Han D series and is subject to specifications outlined in EN 60664-1, IEC 61984, and EN 175301-801, with approvals from DNV GL and UL/CSA. Please note that crimp contacts must be ordered separately.

The FLT-SEC-P-T1-1C-350/25-FM is a plug-in lightning current arrester suitable for 1-phase power supply systems that utilize a combined PE and N conductor configuration (L1, PEN). It adheres to Type 1/Class I standards and is designed to be mounted on a DIN rail. With a maximum continuous operating voltage of 350 V AC and a nominal voltage of 240 V AC, this device is capable of handling significant surge events, featuring a nominal discharge current of 25 kA and a maximum discharge current of 50 kA. The arrester includes a remote fault indicator contact and operates within an ambient temperature range of -40 °C to 80 °C. Notably, the voltage protection level is maintained at ≤ 1.5 kV, ensuring effective operation in various environmental conditions. The arrester is designed for optimal safety with a degree of protection rated at IP20 when all terminal points are utilized. Compliance with EN 61643-11 ensures that the arrester meets rigorous standards for surge protection devices. The product's designation code is FLT-SEC-P-T1-1C-350/25-FM, indicating its specific classification and operational parameters.

The 4-position M12 SPEEDCON connector, designated as SACC-MS-4CON-PG 7-M SCO, is designed for various universal applications. This connector utilizes a straight cable outlet and accommodates external cable diameters ranging from 4 mm to 6 mm. Its screw connection mechanism is enhanced with a knurl made of zinc die-cast material that is nickel-plated for durability.Manufactured in Germany, this connector features a compact length of 62 mm and a housing diameter of 20 mm. The assembly adheres to certain routing guidelines to maintain the degree of protection; excessive bending forces should be avoided to ensure optimal performance. The connector is rated for a nominal voltage of 250 V AC and a nominal current of 4 A, with an overvoltage category of II and a pollution degree of 3.For reliable electrical connections, it supports a connection cross-section of 0.25 mm² to 0.75 mm², corresponding to AWG 24 to 18, and ensures a low contact resistance of ≤ 8 mΩ. The insulation resistance exceeds 100 MΩ, and it is engineered for a minimum of 100 insertion/withdrawal cycles. The connector is also rated for an ambient temperature range from -40 °C to 85 °C, making it suitable for diverse operating conditions. Compliance with IEC 61076-2-101 standards further certifies its quality.

The PTSM 0,5/ 5-P-2,5 is a printed circuit board connector designed for reliable electrical connections in various applications. It accommodates a nominal cross-section of 0.5 mm² and can handle a nominal current of 6 A, with a rated voltage of 160 V (III/2). The connector comprises five potential connections arranged in a single row, with a total of five positions.Constructed with a black housing, the connector employs a push-in spring connection method, allowing for easy installation and secure contact. The contact surfaces are tin-plated, ensuring good conductivity and resistance to corrosion. The connection direction is oriented at 0°, and the connector does not feature a locking mechanism. Additionally, it is designed without mounting provisions, making it suitable for various PCB layouts.Part of the product range PTSM 0,5/..-P, the connector boasts a compact pitch of 2.5 mm. It is packaged in cardboard, with a minimum order quantity of 100 pieces. This component complies with relevant industry standards, including WEEE/RoHS directives, and is suitable for use in environments with a temperature range of -40 °C to 100 °C, depending on derating conditions.

The AI SORTI BOX ANT is designed to meet the specifications of DIN 46228-4 and is CSA-certified for quality assurance. This range box contains a total of 50 pieces of AI 4-10 GY ferrules, alongside 20 pieces each of AI 6-12 YE and AI 10-12 RD, and 10 pieces of AI 16-12 BU. The product is manufactured in Germany and features a galvanically tin-plated coating. It is made from CU-DHP material and is free from silicone and halogen components.With a permanent temperature rating of 105 °C and a short-term temperature tolerance of 120 °C, this product is suitable for various applications. The item weighs 114 g, including packaging, and 103 g when unpackaged. It is packaged as a single unit and has a customs tariff number of 85369010.

The legend plate serves as a marking accessory designed to fit standard 22mm control or signaling units. Its dimensions are 40 x 50 mm, and it features an OFF-ON marking in white against a color plated grey background. The product is made from plastic and is compatible with the Harmony XB5 and XB4 ranges, allowing for tailored applications in various operational settings.Compliant with multiple regulations, this product is free from substances of very high concern and is categorized under the Accessory / Separate Part Category for marking accessories. Notably, it is mercury-free and does not contain toxic heavy metals, ensuring safety during use.Originating from France, the product is packaged in units of one or multiples in bags, catering to different usage needs.

This assortment box includes ferrules that meet the specifications of DIN 46228-4: 1990-09, featuring a total of 50 pieces each for AI 0,5-8 WH and AI 2,5-8 BU, alongside 100 pieces of AI 0,75-8 GY, AI 1-8 RD, and AI 1,5-8 BK. Manufactured in Germany, the product is designed to ensure reliability and performance.The ferrules are made from CU-DHP material with a galvanically tin-plated coating, ensuring durability and conductivity. With a permanent temperature rating of 105 °C and a short-term temperature rating of 120 °C, they are suitable for various applications. Additionally, the components are free from silicone and halogen, adhering to safety standards.Each piece weighs 104.5 g without packing and 114.12 g including packing. The assortment box is designed for ease of use and storage, with a minimum order quantity of one piece and a packing unit of ten pieces.

The S7-PLCSIM Advanced SUS (Download) Software Update Service ensures that users receive the latest software versions for a duration of one year from the date of invoice. This service is automatically extended for another year unless termination is communicated three months before the end of the current contract. An active email address is required for the delivery of updates.This software is compatible with Windows 7, facilitating integrated application configuration and communication functionalities. It supports various operating systems, but is not suitable for Linux. Additionally, the software features integrated functions for analysis, diagnosis, and simulation, enhancing operational effectiveness. Notably, it complies with IEC 1131-3 standards, ensuring adherence to established programming guidelines.

The HC-STA-A16PT-BWS-HS-M25-ELCAL connector set is designed for robust applications, ensuring a high degree of protection with an IP67 rating. This set accommodates 16 positions and is constructed from die-cast aluminum, providing excellent resistance to saltwater environments.Utilizing a push-in connection method, this connector is compatible with conductor cross-sections ranging from AWG 26 to 14, enabling versatile wiring options. The connector also features a complete housing design, allowing for a single cable outlet.With a rated voltage of 250 V and a rated current of 16 A, it supports a wide range of applications. The ambient temperature for operation spans from -40 °C to 100 °C, making it suitable for various environmental conditions. The materials used in its construction include copper alloy contacts with a silver surface and a locking latch made of PA, ensuring durability and reliability.

These accessories are cable memory kit for TeSys Giga 265-500 contactor. It is used to 4 Poles electrical circuit. To be used to hold cables in place when replacing contactor, making reinstallation faster and easier. It can cover -25°C to 60°C operation ambient air temperature, No derating up to 3000m altitude. Green Premium compliant (RoHs/Reach).