Valve Blocks & Manifolds

SMC s double check block for the separated type VQ1000/2000 can be used on the outlet side piping to keep a cylinder in the intermediate position for a long time. Combining the double check block with a built-in pilot type double check valve and a 3 position exhaust center solenoid valve, will enable the cylinder to stop in the middle or maintain its position for an extended period of time.

The single contact block from the Harmony XB4 series features PCB terminals, allowing for straightforward integration with Harmony XB4 and XB5 control and signaling units. This design facilitates swift replacement and configuration of push buttons and selector switches. The installation process is simplified, enabling quick connection to control circuits via PCB connections.With an IP20 protection index, the device safeguards operators from unintended contact with live circuits. It exhibits a mechanical durability of 5,000,000 cycles under a load of 6A, which minimizes maintenance needs and potential damage during operation. The contact block employs a clear color scheme to differentiate between NO and NC types, enhancing usability.Its operational temperature range spans from -40°C to 70°C, ensuring versatility across various applications. The contact block meets several standards, including IEC 60947-5-4 and UL 508, and is certified by organizations such as CSA and DNV, confirming its compliance with industry regulations.

The SMC VQC1000/2000 Manifold Block Assembly VVQC1000-1A-D-C6 is designed for efficient and flexible adaptation in various industrial automation applications. This manifold block assembly features a space-saving design with all solenoids and fittings positioned on one side, allowing for free mounting and easy installation. The use of a multi-pin connector manifold enables the addition of stations and changes in specifications without extensive rewiring, significantly reducing labor costs.With an IP67 compliant enclosure, this manifold block assembly is protected against dust and moisture, making it suitable for harsh environments. The assembly includes a 4-position, dual 3-port valve and supports a variety of common wiring methods. The innovative design eliminates the need for screws, utilizing a one-clamp structure for quick and easy recombination.The VQC series offers outstanding response times and long life, ensuring reliable performance in demanding applications. It is compatible with various Fieldbus protocols, including DeviceNet®, PROFIBUS DP, CC-Link, EtherNet/IP™, EtherCAT, and PROFINET, and supports serial transmission systems like EX600. The self-diagnosis function allows for maintenance period monitoring and identification of parts requiring maintenance, enhancing overall system reliability.Applications for the SMC VQC1000/2000 Manifold Block Assembly include factory automation, material handling, and other industrial processes where efficient and reliable pneumatic control is essential.

Series SY offers major advances in valve performance for cost-effective solutions to your requirements. The series offers high flow with low power consumption in a compact design. The SY is available in body ported or base mounted styles and can be used individually or manifold mounted.

The solid state input relay sub-base, identified by the model ABE7S16E2M0, is a crucial component within the Modicon ABE7 range designed for connecting pre-wired systems.It supports a control voltage of 230/240 V AC at 50/60 Hz for the sensor end and 24 V DC for the PLC end, facilitating efficient integration into various industrial applications. With 16 channels and 2 terminals per channel, it is equipped with removable screw terminals that accommodate a range of wire sizes, ensuring versatility in connections.This unit features fixed solid-state relays and a digital input control function, allowing for rapid connectivity of I/O modules, whether digital, analog, or counter types. The tightening torque required for wiring is 0.6 N.m, utilizing a flat diameter 3.5 mm screwdriver for ease of installation.Designed with an IP20 protection rating, the relay output sub-base is constructed to withstand operational challenges, weighing 0.407 kg. It is compliant with multiple certifications including DNV, GL, CSA, and EAC, ensuring reliability in various environments. The product is certified for use with Modicon M221 Book, TSX Micro, and Modicon Premium controllers, as well as Modicon TM3 and X80 I/O expansion modules.Mounting is facilitated by clips for 35 mm symmetrical DIN rail or by screws through a solid plate with a fixing kit. The ABE7 designation enhances wiring efficiency within automation systems.

The auxiliary contact block is designed for front mounting and is compatible with TeSys K contactors, including models LC1K, CA2K, CA3K, and CA4K. It offers a configuration of 1NO+1NC contacts and supports a rated operational voltage of 690 V AC across a frequency range of 25 to 400 Hz. The block has a high making capacity of 110 A, making it suitable for various applications.Operating under ambient conditions ranging from -25 to 50 °C, this device features spring terminals that accommodate flexible or rigid cables sized between 0.75 and 1.5 mm². With a compact design, the block measures 30 mm in height, 38 mm in width, and 35 mm in depth, and weighs 0.045 kg. It also has an IP20 degree of protection, conforming to IEC 60529 standards.The product is certified under multiple standards including IEC, UL, CSA, and CCC, ensuring its reliability in various environments. Additionally, it complies with environmental regulations such as RoHS and REACh, confirming that it is free from hazardous substances. The auxiliary contact block meets the requirements for normal environmental conditions and is designed for use at operational altitudes up to 2000 meters.

The PotDis-TB-n.c.-G. PU 1 serves as a potential distributor module for the SIMATIC ET 200SP system. It features 18 Push-In terminals that are not connected, ensuring no linkage to P1, P2, or AUX. With dimensions of 34 mm depth, 15 mm width, and 74 mm height, this terminal block is designed for optimal integration within the system.It is important to note that the device does not support rack assembly, front installation, or any integrated current supply. Additionally, it lacks compatibility with safety functions and is not suitable for wall or direct mounting. The product is identified under the designation PotDis TB n.c. G, PU 1.