Accionamientos e inversores

The PSR3-600-70 softstarter boasts a maximum operational current of 3.9 A, with an operating voltage range spanning from 208 to 600 V AC. The control voltage is set between 100 and 240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop via a voltage ramp, with built-in bypass for easy installation and energy efficiency. A RUN signal is available from a relay output in NO (normally open state). The start/stop ramp and time can be easily adjusted using three potentiometers on the front. This softstarter is often used in combination with a manual motor starter (MMS) from ABB, and mechanical connection kits are available. Fieldbus communication is another popular option, enabled by an external adaptor and a Fieldbus plug. PSR is part of our compact range of softstarters, offering basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3 to 105 A and can handle up to 100 starts per hour. Common applications include pumps, fans, compressors, and conveyors.

The Lenze 8400 StateLine Inverter is designed to provide advanced motor control for a wide range of industrial applications. With a power rating of 0.25 kW and a supply voltage of 230V, this inverter is equipped with numerous features to enhance performance and flexibility.One of the key benefits of the 8400 StateLine is its S-type ramps, which ensure smooth acceleration and deceleration, reducing mechanical stress on the system. Additionally, the inverter includes a flying start function that allows for the seamless takeover of a spinning motor, enhancing operational efficiency.The integrated brake control system facilitates the activation of working brakes, ensuring safe and reliable operation. Communication and diagnostics are made easy with the built-in CANopen interface, and the inverter also features an additional interface for connecting to common industrial buses such as PROFIBUS, POWERLINK, EtherCAT, or PROFINET.The capability to connect an HTL encoder significantly broadens the potential applications of this device, making it suitable for use in extruders, linear drives, high-speed roll-up doors, standard lifting tables, and variable-ratio drives.

El variador de frecuencia MICROMASTER 440 de Siemens está diseñado para aplicaciones exigentes de control de motores, ofreciendo un rendimiento y una fiabilidad excepcionales. Este variador versátil admite una amplia gama de voltajes y frecuencias de entrada, lo que lo hace adecuado para diversos entornos industriales. Con su alta capacidad de sobrecarga del 150% de la corriente de salida durante 60 segundos, seguida del 100% de la corriente de salida durante 240 segundos, garantiza un funcionamiento robusto y constante incluso bajo cargas pesadas.El MICROMASTER 440 cuenta con algoritmos de control avanzados para un control preciso de la velocidad y el par, lo que mejora la eficiencia y el rendimiento de sus sistemas accionados por motor. Su diseño compacto, con un tamaño de bastidor de FSA, permite una fácil integración en las configuraciones existentes, mientras que la protección IP20 garantiza un funcionamiento seguro en entornos industriales.Equipado con múltiples entradas/salidas digitales y analógicas, este variador de frecuencia ofrece opciones de conectividad flexibles para adaptarse a diversos requisitos de aplicación. El ventilador de refrigeración integrado garantiza una gestión térmica óptima, prolongando la vida útil del accionamiento. Además, el variador cumple con los estándares relevantes de la industria, lo que garantiza un funcionamiento confiable y seguro.Aplicaciones: El Siemens MICROMASTER 440 es ideal para aplicaciones como cintas transportadoras, bombas, ventiladores y otros sistemas accionados por motor donde el control preciso y el alto rendimiento son esenciales.

The Lenze E82ZAFSC001 is a highly advanced industrial automation component designed to provide reliable and efficient control over a wide range of processes. Featuring a compact and durable design, this component is capable of delivering high levels of precision and accuracy in even the most demanding applications. Equipped with a range of advanced features, including programmable logic control and real-time monitoring capabilities, the E82ZAFSC001 is the ideal choice for industrial automation applications where performance and reliability are critical. With its advanced functionality and robust construction, this Lenze component is the perfect solution for any industrial automation project.

****spare part**** SINAMICS G110-CPM110 AC Drive, with integrated filter B 200-240 V 1 AC+10/-10% 47-63 Hz analog input CT: 0.37 kW; VT: 0.37 kW CT overload: 150% 60 s 150x 90x 116 (HxWxD) degree of protection IP20 ambient temperature -10+50 °C without BOP without RS-485 interface

The SK2403, manufactured by Control Techniques, is a robust and reliable variable frequency drive suitable for use in demanding environments. This product features advanced control algorithms, high-speed communication interfaces, and a compact form factor that allows for flexible configuration options. Whether you need precise positioning control, rapid response times, or high-speed data transfer, the SK2403 delivers the performance and reliability required to optimize your industrial automation processes.

El Control Techniques SP4401 es un robusto variador de frecuencia de 37 kW / 50 CV de la serie Unidrive SP. Funcionando a 460 VCA y 50/60 Hz con una salida de 68 A, ofrece un control preciso del motor en entornos de alta demanda. Diseñado sin teclado, es adecuado para su integración en sistemas automatizados. Ideal para aplicaciones de accionamiento de motores industriales donde el rendimiento y la fiabilidad son esenciales.

The Omron 3G3AXMX2ECT is a high-performance industrial automation component, specifically engineered to deliver accurate and dependable motor control across a broad spectrum of industrial applications. Its advanced control algorithms and intelligent features make it an excellent choice for intricate manufacturing processes that demand precision, speed, and adaptability.This compact device is easy to integrate into existing automation systems, offering multiple communication options such as Ethernet, serial, and USB interfaces. This facilitates seamless integration with other devices and systems.The 3G3AXMX2ECT comes equipped with advanced safety features like overload protection and overvoltage protection, ensuring safe and reliable operation at all times. It also boasts sophisticated diagnostic capabilities, enabling swift and straightforward troubleshooting and maintenance.In summary, the Omron 3G3AXMX2ECT is a high-performance, dependable, and versatile industrial automation component that is ideally suited for a diverse range of applications in the manufacturing and industrial sectors.

The SINAMICS S120 Double Motor Module is a robust solution designed to handle demanding industrial applications. With a DC 600V input and a 3-phase 400V, 9A/9A output, this module offers optimized internal air cooling for efficient heat dissipation.The BOOKSIZE frame size ensures compact installation, while the pulse sample function provides precise control over motor operation. The module also supports extended safety integrated functions, including DRIVE-CLIQ cable technology, ensuring reliable and safe operation in various industrial environments.

The Altivar 320 variable speed drive from Schneider Electric is designed for feeding 3-phase synchronous and asynchronous motors. Its compact book form factor allows for easy installation in automation cabinets. It operates at a rated power of up to 3kW / 4hp and a voltage range from 380V to 500V AC. The drive features IEC 60721-3-3 class 3C3 coated printed circuit boards, enabling it to operate in harsh environmental conditions such as ambient temperatures up to 60°C without the need for additional cooling.The Altivar 320 incorporates functions suitable for a wide range of applications, including high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also supports parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors.The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions can be configured using SoMove software. The Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meet simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting.The Altivar 320 conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions) and is CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options such as braking resistors, line chokes, motor chokes, additional EMC filters are available with Altivar Machine ATV320 drives. The drive can be mounted in a vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes.The Altivar 320 is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It can be configured, controlled, and diagnosed directly in SoMachine and SoMove software by means of the same software brick (DTM). The drive is eco-friendly and complies with directives such as RoHS, WEEE, etc. relating to environmental protection.

La tarjeta de control analógica de 3 ejes SIMODRIVE 610 AC-FDD APCB de Siemens es una tarjeta de control de alto rendimiento diseñada para el control de precisión en sistemas analógicos de bucle cerrado de 3 ejes. Este tablero de control, que forma parte de la serie SIMODRIVE 610 AC, es conocido por su fiabilidad y eficiencia en aplicaciones de automatización industrial.Características principales:Control analógico de 3 ejesSistema de circuito cerradoParte de la serie SIMODRIVE 610 ACDescatalogado por el fabricanteIdeal para:Automatización industrialSistemas de control de precisiónReacondicionamiento de sistemas existentes

SIRIUS, interface module dp interface, for modular safety system 3RK3 PROFIBUS dp interface 12 mbps, rs 485 45 mm overall width screw terminal can be parameterized via safety es without connection cable

This HTL encoder interface module is an option for variable speed drives of Altivar range. It is compatible with Altivar Machine ATV340 and Altivar Process ATV900 drives. It improves drive performance irrespective of the motor load state, zero speed torque, accurate speed regulation, torque accuracy, shorter response times on a torque surge, improved dynamic performance in transient state. It is protected against short circuits and overloads. It weighs 150g. It is used for Flux Vector Control operation with sensor (FVC mode) for asynchronous motors, or for Vector Control operation with speed feedback (FSY mode) for synchronous motors. It is inserted in a dedicated slot of the drive.

The Lenze EVF8216-E is a compact, high-performance frequency inverter designed for industrial automation. This component is capable of controlling asynchronous motors with a power range of up to 15 kW. It offers a variety of advanced control modes, including vector control, torque control, and speed control, ensuring precise and efficient operation. The EVF8216-E is equipped with a range of protective functions, such as overvoltage and undervoltage protection, overcurrent protection, and motor overheat protection. This ensures safe and reliable operation in even the harshest industrial environments. The Lenze EVF8216-E is the ideal choice for demanding industrial applications that require a high level of precision and reliability.

The ABB PSTX250-600-70 is a versatile softstarter designed for medium to large-sized three-phase motors. It offers a rated maximum operational current of 250 A with an operating voltage span from 208...600 V AC. The control voltage ranges between 100...250 V AC at 50/60 Hz.The PSTX features a three-phase control soft start and stop through a voltage or torque ramp, with built-in bypass for easy installation and energy saving. It also includes relay outputs for RUN, TOR, and Event signals in NO (normally open state).The PSTX comes with functions such as current limit, kickstart, analog output, EOL, motor heating, and pump cleaning. It also offers features like jog, braking, stand-still brake, diagnostics, sequence start, and emergency/fire pump mode.Interaction with the PSTX is facilitated through a detachable full graphic display with IP66 and 4x outdoor rating. Communication options include hardwire inputs Start/Stop/Reset of fault, programmable digital inputs, built-in Fieldbus communication Modbus RTU, and optional ANYBUS modules with various protocols like Profinet, Profibus, Modbus TCP, Ethernet IP, and others.The ABB PSTX250-600-70 is the ideal solution for any motor starting application. It's suitable for medium to large-sized three-phase motors with nominal currents from 30...1250 A inline connection or 52...2160 A inside delta connection. Typical applications include pumps, fans, compressors, and conveyors.

Control Techniques SP2402 is a versatile AC variable speed drive from the Unidrive SP series (often associated with Emerson/Nidec). Designed for 3-phase 380-480 VAC input, it offers dual power ratings: 7.5kW (10hp) Heavy Duty and 11kW (15hp) Normal Duty. Corresponding continuous output currents are 16.5A (HD) and 21A (ND). This Size 2 drive supports multiple control modes including Open/Closed Loop Vector, Servo, V/Hz, and Rotor Flux Control (RFC). Features include an IP20 rating, onboard EMC filter, dynamic braking control, universal encoder interface, and 3 option module slots for enhanced connectivity (e.g., fieldbus). It incorporates Safe Torque Off (STO, SIL 3) for functional safety. A keypad (SM-Keypad) is typically required for operation and sold separately. Note: This product is discontinued/in phase-out by the manufacturer.

This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 22A. This Altistart 01 can be used for a motor rated power up to 5.5kW or 7.5hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

This Altivar Process ATV900 variable speed drive can feed 3-phase synchronous and asynchronous power motors. It is suitable for motors with power rating up to 30kW/40hp for applications requiring slight overload (up to 120%). It is suitable for motors with power rating up to 22kW/30hp for applications requiring significant overload (up to 150%). It works at a rated supply voltage from 380V to 480V AC. This variable speed / frequency drive (VSD / VFD) is specifically designed for industrial processes. In the following market segments, oil and gas, mining, minerals and metals, food and beverage water and wastewater. It offers high motor performance on any motor and total control of any kind of coupling in master/slave applications. Network services help ensure operation continuity even in case of connection breakdown. Web server and data logging help reduce downtime through fast troubleshooting and preventive maintenance. Its advanced connectivity, including EtherNet/IP and Modbus TCP, allows deep integration into automation architectures. It is designed to be mounted in vertical position (+/- 10 °) on a wall.

This Altivar 340 variable speed drive can feed 3-phase synchronous and asynchronous motors in open and closed loop control. Altivar Machine ATV340 drives are sized heavy duty as standard. It works at a rated power up to 45kW / 60hp and a rated voltage from 380V to 480V AC. ATV340 has been designed to meet the needs of applications for harsh environments, such as vibration, shock and non-conductive dust and where high temperature resistance up to 60 °C is needed. This product integrates Modbus serial line communication protocols as standard. This drive features multi-protocol Ethernet embedded, it consists of Ethernet IP and Modbus TCP communication interfaces. it weighs 56.4kg and its dimensions are, 271mm wide, 908mm high, 309mm deep. ATV340 incorporates functions and features suitable for the most common applications, including packaging, material handling, material working, hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions), IEC 60721-3, IEC 61508, IEC 13849-1. It is also CE, UL, CSA, and TÜV certified. Accessories and options (encoder interface modules, I/O expansion modules, communication modules, braking resistors, line chokes, additional EMC filters) are available with Altivar Machine ATV340 drives, depending on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV340 drives directly in SoMachine and SoMove software by means of the same software brick (DTM). It is eco-friendly and complies with directives such as RoHS relating to environmental protection.

Altivar Machine ATV12 is an offer of variable speed drives for commercial equipment and simple machines. It works at a rated power up to 0.37kW / 0.55hp and a rated voltage from 200V to 240V AC. It is designed with heatsink for normal environments and fan-cooled enclosure. It has advanced PID and catch on the fly functions, basic cabling, and easy motor control setting. Based on the needs, it can be delivered without heatsink, with embedded EMC filter, or as standard version. The Altivar 12 drive integrates as standard the Modbus communication protocol. This Altivar Machine ATV12 is designed for simple applications, in industry, commercial machines and HVAC machines such as conveyors, pumps, extractors, access barriers and treadmills. It conforms to IEC, UL and other international standards. SoMove software compatibility enables saving and transfering of configurations to spare drive, reducing maintenance downtime. It features an optimized application of power and torque for ventilation and pumping applications, this allows up to 30% energy savings.