Electrónica y PCB

8910DP definite purpose magnetic contactors are designed for heating, air conditioning and refrigeration applications. This line of definite purpose contactors has current ratings up to 120 amperes resistive and 50 HP at 600 VAC. This two pole definite purpose contactor has a full load rating of 30 ampere and a resistive rating of 40 amperes. The nonreplaceable coil is available with a variety of coil voltages. This device has a 208/240 VAC 60 Hz, 220 VAC 50 Hz coil. The contactor has straight through wiring. Contactor is 2.00 inches by 3.32 inches and 2.45 tall. These contactors are UL Listed and CSA Certified.

The LC2K0610B7 is a compact 3-pole TeSys K reversing contactor from Schneider Electric designed for motor applications. With a rating of 6A AC-3, it offers a 24V 50/60Hz AC coil, 2NO auxiliary contacts, a mechanical interlock, and pre-wired reversing circuit. This compact unit is DIN-rail compatible, with connections by screw clamp terminals, making it suitable for both DIN-rail and panel mounting.The LC2K0610B7 is a versatile solution that complies with multi-standards (IEC, UL, CSA, CCC, EAC, Marine) and is certified Green Premium (RoHs/Reach). It can be completed with auxiliary contact blocks (LA1K, LA2K) and thermal relays (LR2K), making it a comprehensive solution for motor control applications.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 50A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 15HP at 200 to 208VAC, 15HP at 240VAC, 40HP at 480VAC and 40HP at 600VAC three phase. Contactor is also rated for 3HP at 115VAC and 7.5HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 110A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 110 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.87 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys Deca series contactors are engineered for optimal compatibility with various control systems. These non-reversing contactors are versatile, capable of handling a broad spectrum of applications.Available in multiple ratings, these 9A inductive 3 pole IEC contactors can be mounted on DIN rail or directly to panels. They are equipped with both Horsepower and Kw motor rating for international acceptance.The contactor is rated for 2HP at 200-208VAC, 2HP at 240VAC, 5HP at 480VAC, and 7.5HP at 600VAC three phase. It also handles 0.33HP at 115VAC and 1HP at 240VAC single phase.The contactor comes with a 120 VAC 50/60 Hz coil, featuring one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified.Spring terminals are used for load and auxiliary connections. An extensive range of accessories ensures compatibility with most applications. The contactor measures 3.15 inches in height, 1.77 inches in width, and 3.39 inches in depth, weighing approximately 0.71 lbs.Certified to UL, CSA, IEC, CCC, EAC, and Marine standards, the contactor also meets RoHS/REACh requirements, making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 115A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 30HP at 200 to 208VAC, 40HP at 240VAC, 75HP at 480VAC and 100HP at 600VAC three phase. When used with a 480VAC up to 250A circuit breaker, this contactor can have a SCCR up to 100kA. When used with a 600VAC up to 250A circuit breaker, this contactor can have a SCCR up to 50kA. When used with 600VAC Class J or CC fuses up to 250A, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 120 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 6.22 inches tall, 4.72 inches wide and 5.35 inches deep. It weighs 5.51 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys D contact relay is a high-quality, robust solution designed for seamless integration into control systems. This 4 pole IEC contactor can be used to create motor starters for a wide range of applications. It offers a resistive load rating of up to 20A and is available in 13 different contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This open style contact relay can be mounted on DIN rail or directly on a panel. It comes with four normally open power contacts, each rated at 20A for resistive loads. The contactor is supplied with a 24VDC coil equipped with a transient suppressor module. Additionally, it includes one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified. The contact relay features screw clamp terminals for load and auxiliary connections. A comprehensive range of accessories ensures that it can meet the requirements of most applications. With dimensions of 3.35 inches in height, 1.77 inches in width, and 3.90 inches in depth, and a weight of 0.80 lbs, this contact relay is both compact and lightweight. This TeSys D contact relay is certified to UL, CSA, IEC, CCC, EAC, and Marine standards. It also meets the RoHS/REACh requirements, making it an environmentally friendly choice. The contactor's robust design and high-quality components ensure reliable performance in demanding environments.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 40A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 10HP at 200 to 208VAC, 10HP at 240VAC, 30HP at 480VAC and 30HP at 600VAC three phase. Contactor is also rated for 3HP at 115VAC and 5HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 90A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 440 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.87 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 25A resistive load rating. Contactor is supplied with a 12 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The AC-3 Power Contactors are engineered for high-power industrial applications, offering a robust design with a 16A capacity at 7.5KW/400V.These contactors feature integrated diode technology and a captive auxiliary switch, ensuring reliable operation in various environments. The spring type terminal design provides easy installation and maintenance, while the S00 size ensures compatibility with a wide range of applications.With a focus on performance and reliability, the AC-3 Power Contactors are an ideal choice for industrial automation systems that require high-power switching capabilities.

TeSys D Reversing Contactor by Schneider Electric is a high-performance solution for motor control applications. It offers a maximum load capacity of 9A/690V AC-3 (4kW@400V), ensuring efficient and reliable performance. The contactor features low consumption 24V DC coils with a transient suppressor module, providing enhanced protection against voltage spikes. It also includes 2NO+2NC built-in auxiliary contacts (NC mirror contacts), allowing for versatile control options. The contactor is designed to operate at rates up to 3600 cycles/hour and in environments up to 60°C. It offers a compact design with a width of 90mm, making it suitable for various installation scenarios. The contactor is available in multiple mounting options, including DIN-rail mounting or screw fixing. It comes with pre-wired reversing power connections and mechanical and electrical interlocks, ensuring safe and efficient operation. This product has been certified under various international standards such as IEC, UL, CSA, CCC, EAC, and Marine. Additionally, it complies with Green Premium standards (RoHS/REACh), making it an environmentally friendly choice.

The TeSys Deca contact relay is an integral component of control systems, designed for seamless integration. This non-reversing IEC contactor can be employed in a wide range of applications as a motor starter.This 4 pole contactor boasts a resistive load rating of up to 40A and features two normally open (NO) and two normally closed (NC) power contacts. It is equipped with a 230VAC 50/60Hz coil for reliable operation.The TeSys Deca contact relay also comes with one NO and one NC auxiliary contact as standard, ensuring comprehensive control capabilities. The load and auxiliary connections are facilitated by screw clamp terminals, enhancing ease of use.With a height of 4.13 inches, width of 1.77 inches, and depth of 3.90 inches, this contactor is compact yet robust. It weighs approximately 0.94 lbs, making it suitable for various mounting options including DIN rail or panel mount.The TeSys Deca contact relay is certified under UL, CSA, IEC, CCC, EAC, and Marine standards, ensuring high-quality performance. It also adheres to RoHS/REACh regulations, positioning it as a Green Premium product.

The TeSys Deca contactor is a versatile solution that can be used to create motor starters for diverse applications. It is available in 13 contactor ratings, catering to inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 9A inductive 3 pole IEC contactor can be mounted on DIN rail or directly on a panel. It is rated for various horsepower and kilowatt (Kw) motor ratings, ensuring international acceptance. The contactor is designed to handle high currents and voltages, with a maximum SCCR of 100kA when used with the appropriate fuses or circuit breakers. It comes with a 110VAC 50/60Hz coil and has one normally open (NO) and one normally closed (NC) auxiliary contact built-in as standard. The contactor is compact, measuring 3.15 inches in height, 1.77 inches in width, and 3.39 inches in depth, and weighs only 0.71 lbs. It is certified to various international standards, including UL, CSA, IEC, CCC, EAC, and Marine, and meets the RoHS/REACh requirements.

The TeSys D contactor series is engineered to provide optimal performance within control systems. These contactors can be employed across diverse application scenarios, offering versatility in their usage. Available in multiple ratings, these contactors cater to a broad spectrum of applications, from handling inductive motor loads up to 150 full-load amps to resistive loads up to 200 amps. This particular reversing 4 pole IEC contactor is designed for easy mounting on DIN rail or direct panel installation. Featuring four normally open power contacts, this contactor boasts a 25A resistive load rating. It comes equipped with a 120 VAC 50/60 Hz coil and includes one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified. The contactor's load and auxiliary connections are facilitated by screw clamp terminals. A comprehensive range of accessories ensures that it can meet the demands of most applications. Measuring 3.35 inches in height, 3.54 inches in width, and 3.54 inches in depth, this contactor weighs 1.61 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, making it a Green Premium product that adheres to RoHS/REACh regulations.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 40A resistive load rating. Contactor is supplied with a low consumption 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.58 inches tall, 1.77 inches wide and 4.21 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

LC2K0610P7 is a compact 3-pole TeSys K reversing contactor from Schneider Electric for motor applications. Rated 6A AC-3 2.2kW@400V, it includes a 230V 50/60Hz AC coil, 2NO auxiliary contacts, a mechanical interlock and pre-wired reversing circuit. LC2K0610P7 is a 3-pole TeSys K reversing contactor from Schneider Electric for simple motor applications rated up to 2.2kW@400V. Very compact, DIN-rail compatible, with connections by screw clamp terminals, it is assembled with a mechanical interlock and a pre-wired reversing circuit. It includes a 230V 50/60Hz AC coil and 2NO built-in auxiliary contacts. Available worldwide, it complies with multi-standards (IEC, UL, CSA, CCC, EAC, Marine) and is certified Green Premium (RoHs/Reach). Very compact, 90mm wide, for DIN-rail and panel mounting. Assembled with mechanical interlock and pre-wired reversing circuit. Provides a 230V AC coil compatible 50/60Hz and 2NO built-in auxiliary contact. Can be completed with auxiliary contact blocks (LA1K, LA2K) and thermal relays (LR2K).

The CCVA 2,5/22-G-5,08 P26THR PCB header is a reliable solution designed to meet the demands of various applications. It features a nominal cross section of 2.5 mm² and a black color, ensuring durability and resistance to environmental factors. This product is rated for a nominal current of 12 A and a voltage of up to 320 V (III/2), making it suitable for high-power applications. Key Features: Tin contact surface for enhanced conductivity Male connector type for easy integration with other components 22 potentials, 1 row, and 22 positions, providing ample connectivity options 5.08 mm pitch for precise alignment THR soldering mounting for secure installation Linear pinning for efficient wiring 2.6 mm solder pins per potential for reliable connection COMBICON MSTB 2,5 plug-in system for versatile use

TeSys D Green contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 65A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 20HP at 200 to 208VAC, 20HP at 240VAC, 40HP at 480VAC and 50HP at 600VAC three phase. Contactor is also rated for 5HP at 115VAC and 10HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 125A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Equipped with an electronic coil, wide band voltage 100-250V, AC/DC compatible, low consumption. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 2.21 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys D control relay, featuring 5 contacts (3 Normally Open (NO) and 2 Normally Closed (NC)), is designed to handle electromagnetic loads with a capacity of 10A/690V. This device provides a 120V 50/60Hz AC control circuit for easy connection via screw clamp terminals.The TeSys D relay is built for high reliability and durability, capable of operating at rates up to 180 cycles per minute and withstanding ambient temperatures ranging from -40°C to +60°C. Its compact size (45mm width) allows it to be easily mounted on a 35mm DIN rail or fixed using screws.The TeSys D control relay is multi-standard certified, including IEC, UL, CSA, CCC, EAC, and Marine standards. It also meets Green Premium product requirements, adhering to RoHS/REACh directives.

The TeSys Deca contactor is a high-performance solution designed to meet the needs of diverse industrial applications. It offers a wide range of contactor ratings, making it suitable for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps.This specific model is a 12A inductive 3 pole IEC contactor, capable of being mounted on DIN rail or directly onto a panel. It boasts both Horsepower and Kw motor rating for international acceptance, with ratings including 3HP at 200-208VAC, 3HP at 240VAC, 7.5HP at 480VAC, and 10HP at 600VAC three phase.The contactor is equipped with a 24 VDC coil with transient suppressor module and features one normally open and one normally closed auxiliary contact as standard. It also comes with screw clamp terminals for load and auxiliary connections, ensuring easy integration into your system.With its compact size of 3.03 inches tall, 1.77 inches wide, and 3.74 inches deep, weighing just 1.07 lbs, this contactor is designed for versatility and ease of use. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, making it a reliable choice for various applications.Moreover, its compliance with RoHS/REACh standards makes it an environmentally friendly option, contributing to sustainable practices in your industrial setup.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 32A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC and 30HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 5HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 80A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 48 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.98 inches deep. It weighs 1.18 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.