Electrónica y PCB

The TeSys D series of contactors are engineered to facilitate seamless integration within automated control systems. These versatile devices enable the creation of motor starters suitable for a wide range of applications, supporting both inductive and resistive loads. The product line encompasses 13 different ratings, accommodating inductive motors up to 150 full-load amps and resistive loads reaching up to 200 amps. This specific model is a 4-pole IEC contactor that can be easily mounted on a DIN rail or directly onto a control panel. It features four normally open power contacts rated for a 25A resistive load. The device incorporates a 110 VAC 50/60 Hz coil for actuation and includes a built-in single normally open auxiliary contact, certified to mirror standards. Load and auxiliary circuits are connected via screw clamp terminals. A comprehensive selection of accessories is available to address diverse application needs. The unit measures 3.35 inches in height, 1.77 inches in width, and 3.62 inches in depth, with a weight of 0.80 lbs. This contactor holds certifications from UL, CSA, IEC, CCC, EAC, and Marine standards and is compliant with RoHS/REACh directives, qualifying it as a Green Premium product.

The TeSys D contactor is an ideal choice for motor starters across various applications. It offers a wide range of contactor ratings, including inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This specific 18A inductive 3 pole IEC contactor is designed for mounting on DIN rail or directly on a panel.The TeSys D contactor comes with both Horsepower and Kw motor rating for international acceptance. It can handle up to 5HP at 200-208VAC, 5HP at 240VAC, 10HP at 480VAC, and 15HP at 600VAC three phase. For single-phase applications, it can handle up to 1HP at 115VAC and 3HP at 240VAC.When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 40A Class J or CC fuse, it can have a SCCR up to 100kA.This contactor is supplied with a 380 VAC 50/60 Hz coil. It has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections.The TeSys D contactor measures 3.03 inches in height, 1.77 inches in width, and 3.39 inches in depth, weighing 0.73 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, making it a Green Premium product that meets the requirements of RoHS/REACh.

TeSys Giga High Power Contactors are designed for demanding applications, offering a maximum operating rate of up to 600 cycles per hour. These contactors feature a 48-130V AC/DC wide band low consumption electronic coil, providing high reliability and durability with a mechanical lifespan of 5 Mcycles.The TeSys Giga High Power Contactors come with a local Contact Wear Diagnosis (CWD) as standard, enabling continuous monitoring with healthy and alarm indicators. They can be easily fixed in all quadrants, allowing for maintenance without removing cables/busbars. The contactor is IP2x protected and conforms to IEC 60529 and VDE 0106 standards.The TeSys Giga High Power Contactors are compact, with dimensions of 290mm x 140mm x 209mm (H x W x D), making them ideal for panel space savings. They are multi-standard certified and Green Premium compliant, ensuring compliance with environmental regulations.Each TeSys Giga High Power Contactors comes with a unique QR code for quick access to complete product data.

TeSys D control relay, 5 contacts (3NO + 2NC), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 12V DC control circuit with no inrush consumption and equipped with a surge suppression device, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -40/+60°C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium product (RoHS/REACh).

El contactor TeSys Deca IEC de Schneider Electric está diseñado para una integración perfecta en los sistemas de control, ofreciendo un rendimiento fiable para los arrancadores de motor en diversas aplicaciones. Este contactor no inversor tiene una potencia nominal de 12 A y puede manejar hasta 7,5 HP a 480 VCA en sistemas trifásicos. Cuenta con una bobina de 110 V CC con un módulo supresor de transitorios, lo que garantiza un funcionamiento eficiente.Los contactores TeSys D son versátiles y soportan aplicaciones de motor de hasta 150 amperios a plena carga y cargas resistivas de hasta 200 amperios. Este modelo es adecuado tanto para el montaje en carril DIN como en el panel directo, lo que proporciona flexibilidad en la instalación. Incluye un contacto auxiliar normalmente abierto y otro normalmente cerrado, y el contacto NC está certificado como espejo para mayor seguridad.Con un diseño robusto, el contactor cumple con los estándares UL, CSA, IEC, CCC, EAC y marino, y cumple con las regulaciones RoHS / REACh, lo que lo convierte en un producto Green Premium. Los terminales de abrazadera de tornillo garantizan una carga segura y conexiones auxiliares, y hay una amplia gama de accesorios disponibles para satisfacer diversas necesidades de aplicación.Dimensiones: 3,03 pulgadas de alto, 1,77 pulgadas de ancho y 3,74 pulgadas de profundidad. Peso: 1.07 libras.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 200A resistive load rating. Contactor is supplied with a 24 VDC coil with integral suppression device. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 6.22 inches tall, 6.10 inches wide and 4.53 inches deep. It weighs 6.31 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D control relay, 5 contacts (3NO + 2NC), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 220V DC control circuit with no inrush consumption and equipped with a surge suppression device, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -40/+60°C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium product (RoHS/REACh).

TeSys GS fuse switch-disconnector, 4 poles (3P+N), 32A/800V, to be used with NFC cylindrical fuse links size 10x38mm up to 32A, for motor applications up to 15kW@400V AC-23. To be equipped with a direct operating handle GS1AH103 (to be ordered separately), or with an external operating handle GS2AH that can be front side, left-hand side, or right-hand side mounting (several models available). It provides screw terminals with 4P terminal shrouds, high short circuit current rating 100kA@400V. Add-on auxiliary contact modules front mounting GS1AM (early-break and position signaling) can complete the assembly (to be ordered separately). Type aM and gG 10x38mm cylindrical fuse links without strickers DF2CA, DF2CN are available (to be ordered separately). Multi standards certified (IEC, Marine), Green Premium compliant (RoHS/REACh).

The TeSys F contactor is a versatile solution for motor applications, offering a capacity of 115A/690V AC-3. This contactor is designed to handle high operating rates until 2400 cycles/hour and environments up to 55°C, ensuring reliability and durability. It features bolt terminals for easy connection with bars or cables with lugs. The TeSys F contactor comes without a coil, allowing for later selection and installation (coil to be ordered separately). This design also makes installation and maintenance easier, with a drawer for the selected coil and a large choice of add-on blocks and accessories (to be ordered separately). This contactor is multi-standard certified (IEC, UL, CSA, CCC, EAC, Marine) and complies with Green Premium standards (RoHS/REACh).

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 25A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200 to 208VAC, 7.5HP at 240VAC, 15HP at 480VAC and 20HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 3HP at 240VAC single phase. Contactor is supplied with a 220 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Spring terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.90 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.82 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 25A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200-208VAC, 7.5HP at 240VAC, 15HP at 480VAC and 20HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 3HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 60A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 380 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.82 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The AC-3 power contactor is designed to handle high power applications with a capacity of 17A and 7.5kW at 400V. It features 2NO+2NC connections, operating on DC 24V, making it suitable for a wide range of industrial and automation needs.This contactor is a 3-pole device, ensuring reliable power distribution. The size S0 spring type terminal provides easy and secure connection, while the captive auxiliary switch adds an extra layer of safety and functionality.

The TeSys Deca non-reversing contactor is a versatile solution for various control systems, offering a broad range of applications. It's available in multiple ratings, including up to 150 full-load amps for inductive motor applications and up to 200 amps for resistive loads. This specific 65A contactor is designed for IEC standards and can be mounted on DIN rail or directly onto a panel. It's rated for various horsepower levels, from 20HP at 200VAC to 50HP at 600VAC for three-phase applications, and up to 10HP at 240VAC for single-phase applications. The contactor is equipped with a 230VAC 50/60Hz coil and features one normally open and one normally closed auxiliary contact. It's also designed to meet various international standards, including UL, CSA, IEC, CCC, EAC, and Marine standards. This contactor is a Green Premium product, meeting RoHS/REACh requirements. With its compact dimensions (4.80 inches tall, 2.17 inches wide, and 4.72 inches deep) and lightweight design (weighing 1.90 lbs), it's an ideal choice for various applications.

ET 200PRO EDSE/DSSE HF ELECTRONIC DIRECT STARTER ELECTRONIC (SOFT) SWITCHING FULL MOTOR PROTECTION COMPRISING: ELECTRONIC OVERLOAD PROTECTION + THERMISTOR 3 AC 400V/5.5KW; 1.5A...(9A)12A W/O BRAKE CONTACT 4DI HAN Q4/2 - HAN Q8/0

TeSys D control relay, 5 contacts (3NO + 2NC), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 24V 50/60Hz AC control circuit, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -40/+60°C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium product (RoHS/REACh).

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 25A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200-208VAC, 7.5HP at 240VAC, 15HP at 480VAC and 20HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 3HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 60A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 220 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.82 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The AF30 contactor series is a robust solution for voltage control applications. These contactors are capable of managing power circuits up to 690 V AC and 220 V DC, making them ideal for controlling 3-phase motors and non-inductive or slightly inductive loads. AF30 contactors feature an electronic coil interface that accepts a wide range of control voltages, from 24 V to 500 V AC at 50/60 Hz or 20 V to 500 V DC. This versatility allows for one coil to be used for different control voltages worldwide without any need for coil changes. The AF30 contactors are equipped with built-in surge protection, eliminating the requirement for additional surge suppressors. They are of the block type design and include 3 main poles along with front and side-mounted add-on auxiliary contact blocks, which are mechanically-linked and comply with Annex L of IEC 60947-5-1 and Annex F of IEC 60947-4-1 for N.C. mirror contacts. The AF30 series also offers a wide range of accessories, providing flexibility in application and installation. This contactor is not only reliable but also user-friendly, making it a preferred choice for voltage control applications.

TeSys D control relay, 5 contacts (3NO + 2NC), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 110V DC control circuit with no inrush consumption and equipped with a surge suppression device, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -40/+60°C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium product (RoHS/REACh).

TeSys Giga high power contactor, 4 poles (4 NO) for category AC-1 applications up to 550A @440V. It provides a 48-130V AC/DC wide band low consumption electronic coil and embedded highly reliability 1NO+1NC auxiliary contact block (17V 1mA). Designed for demanding applications with maximum operating rates up to 600 cycles per hour and environments until 60°C. It procures high reliability and durability with 5 Mcycles mechanical durability. Local Contact Wear Diagnosis (CWD) as standard function, continuous monitoring with healthy and alarm indicators. It is possibility to replace switching module (main contacts), enhancement contactor life. Contactor can be fixed in all quadrants, maintenance without removing cables/busbars, and OLR could be directly mounted below contactor. To be used with power connection by bolted connection and control connections by spring terminals, accessible from front for easy and quick replacement. It provides IP2x protection in Front face with shrouds conforming to IEC 60529 and VDE 0106. It can cover -25°C to 60°C operation ambient air temperature and directly mounted on plate, No derating up to 3000m altitude. The dimension is 290mm x 185mm x 209mm (H x W x D), compact size enables panel space savings. Multi standards certified(CE,CB,CCC,cULus,EAC,KC,RCM,Marine) and Green Premium compliant (RoHs/Reach). Unique QR code provides quick access to complete product data.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 65A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 20HP at 200 to 208VAC, 20HP at 240VAC, 40HP at 480VAC and 50HP at 600VAC three phase. Contactor is also rated for 5HP at 115VAC and 10HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 125A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 48 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.90 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.