Wago

280-564

1 / 3
thumbnail
thumbnail
thumbnail
Part Number
280-564
Tariff Code
85369010000
UPC
4044918637206
ETIM
Group Code : EG000012
Group Description : Terminal blocks
Class Description : Sensor/actuator terminal block
Class Code : EC000900
Version : 7
$5.58
net
1
Payment methods:
Best offer from:
USTrusted Automa.Net Supplier
Availability:
5 pcs.
In-Stock
Updated at: 08-11-2024
Warranty:
12 months
Estimated Delivery:
On Request
Condition:
New Surplus
New Surplus - A new, unused, undamaged item without a manufacturer guarantee. The item may come without original packaging or in replacement packaging. If provided, the box may have been opened.
Secure Payment Process
Return & Refund Policies
Shipping Policies
Warranty Policies

Ratings Per Iec/En

Nominal voltage (III/3)
400 V
Rated impulse voltage (III/3)
6 kV
Rated current
20 A
Legend (ratings)
(III / 3) ≙ Overvoltage category III / Pollution degree 3

Environmental Requirements

Processing temperature
-35 … +85 °C
Continuous operating temperature
-60 … +105 °C

Physical Data

Width
5 mm / 0.197 inches
Height
80 mm / 3.15 inches
Depth from upper-edge of DIN-rail
55.5 mm / 2.185 inches

Material Data

Note (material data)
<a href="https://www.wago.com/us/material-specifications" href="_blank">Information on material specifications can be found here</a>
Color
Gray
Material group
I
Insulation material
Polyamide (PA66)
Flammability class per UL94
V0
Fire load
0.275 MJ
Weight
7.730 g

Mechanical Data

Design
Angled
Mounting type
DIN-35 rail
Marking level
Center marking

Specifications

Product Group Code
0001

Commercial Data

Packaging type
Box
Country of origin
DE
GTIN
4044918637206
Customs tariff number
85369010000

Power Loss

Power loss, per pole (potential)
0.532 W
Rated current IN for specified power loss
20 A
Resistance value for specified, current-dependent power loss
0.00133 Ω

Connection 1

Connection technology
CAGE CLAMP®
Actuation type
Operating tool
Connectable conductor materials
Copper || Aluminum
Connectable conductor materials (note)
Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste <a href="https://www.wago.com/249-130">249-130</a> is used for termination.“Alu-Plus” Contact Paste Advantages:Automatically destroys the oxide film during clamping.Prevents fresh oxidation at the clamping point.Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).Provides long-term protection against corrosion.Using terminal blocks with CAGE CLAMP® Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus” Contact Paste.It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::2.5 mm² = 16 A4 mm² = 22 A
Solid conductor
0.08 … 2.5 mm² / 28 … 12 AWG
Fine-stranded conductor
0.08 … 2.5 mm² / 28 … 12 AWG
Note (conductor cross-section)
12 AWG: THHN, THWN
Strip length
8 … 9 mm / 0.31 … 0.35 inches
Wiring direction
Front-entry wiring

Related products