Wago
286-394/004-000
1 / 3
- Part Number
- 286-394/004-000
- Tariff Code
- 85364900990
- UPC
- 4045454496388
- ETIM
- Group Code : EG000019
- Group Description : Relays
- Class Description : Switching relay
- Class Code : EC001437
- Version : 7
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Safety And Protection
- Rated voltage
- 300 V
- Overvoltage category
- II
- Pollution degree
- 2
- Dielectric strength (control/load circuit) (AC, 1 min)
- 3 kVrms
- Dielectric strength (open contact) (AC, 1 min)
- 1 kVrms
- Insulation type (control/load circuit)
- Reinforced insulation (safe isolation)
- Insulation type (open contact)
- Functional insulation
- Insulation type (adjacent devices)
- Reinforced insulation (safe isolation)
- Protection type
- IP20
Load Circuit
- Number of changeover/switchover contacts
- 1
- Contact material (relay)
- AgNi + Au
- Limiting continuous current
- 1 A
- Switching voltage (max.)
- AC 250 V
- Pull-in time (typ.)
- 8 ms
- Drop-out time (typ.)
- 4 ms
- Bounce time (typ.)
- 2 ms
Environmental Requirements
- Ambient temperature (operation at UN)
- -25 … +70 °C
- Ambient temperature (storage)
- -25 … +70 °C
- Processing temperature
- -25 … +50 °C
- Relative humidity
- 5 … 85 % (no condensation permissible)
- Operating altitude (max.)
- 2000 m
Control Circuit
- Nominal input voltage UN
- DC 24 V
- Input voltage range
- -30 … +25 %
- Nominal input current at UN
- 8 mA
Physical Data
- Width
- 15 mm / 0.591 inches
- Height from upper-edge of DIN-rail
- 82.5 mm / 3.248 inches
- Depth
- 52 mm / 2.047 inches
Material Data
- Color
- Light gray
- Fire load
- 0.345 MJ
- Weight
- 26.090 g
Standards And Specifications
- Standards/specifications
- EN 61010-2-201 || EN 50121-3-2
Mechanical Data
- Mounting type
- Pluggable module for receptacle terminal blocks
Specifications
- Product Group Code
- 0006
Commercial Data
- Packaging type
- Box
- Country of origin
- DE
- GTIN
- 4045454496388
- Customs tariff number
- 85364900990
Notes
- Note
- To prevent damaging the gold layer, 30 V switching voltages and 50 mA currents must not be exceeded. Higher switching power eventually evaporates the gold layer. The resulting deposits in the housing may reduce service life. This relay is designed for use in signal processing networks, which are not supplied by the low-voltage power supply networks.
