- Number of measurement inputs
- 6 (3 voltage measurement inputs, 3 current measurement inputs)
- Signal type
- Power measurement
- Signal form
- Any (taking the maximum frequency into account)
- Resolution [bit]
- 16 bits
- Data width
- 2 x 48-bit data; 2 x 24-bit control/status (optional)
- Voltage path input resistance (typ.)
- 1071 kΩ
- Current path input resistance (typ.)
- 5 mΩ
- Reference for measurement error
- AC current/voltage
- Measurement error (reference temperature)
- 25 °C
- Measurement error, deviation (max.) from the upper-range value
- 0.5 %
- Measurement current (max.)
- 5 A
- Measurement voltage (max.)
- 500 VAC, 3 phases
- Measurement cycle time
- Adjustable measuring cycle time for Min_Max_Values
- Frequency range with activated DC filter
- 10 … 2000 Hz
- Frequency range with deactivated DC filter
- 0 … 2000 Hz
- Frequency range (mains frequency)
- 45 … 65 Hz
- Limit frequency
- 7.2 kHz
- Rated voltage
- ULN = 277 VAC/DC; ULL = 480 VAC
- Calculated values
- Active power, active energy, grid frequency, cos ϕ
- Measurement components
- Evaluating
- Measurement method
- True RMS measurement
- Configuration options
- WAGO-I/O-CHECK || CODESYS Library || e!COCKPIT
- Supply voltage (system)
- 5 VDC; via data contacts
- Current consumption (5 V system supply)
- 100 mA
- Isolation
- 4 kV system/field
- Rated surge voltage
- 4 kV
- Indicators
- LED (A) green: Communication; LED (B-G) red: Error L1, Display: Override in current measurement path, Display: Undervoltage in voltage measurement path, Error L2, Error L3, Display: Override in voltage measurement path; LED (H) yellow: Interchange in phase sequence L1-L2-L3