750-535/040-000

Name: 2-channel digital output; 24 VDC; Intrinsically safe; Extreme
Brand: Wago
SKU: 750-535/040-000
Availability: InStock

1 / 4

ETIM

Group Code : EG000024

Group Description : PLC's

Class Description : Fieldbus, decentr. periphery - digital I/O module

Class Code : EC001599

Version : 7

€202.35

net

€213.00

Shipping from:

€35.00

Payment methods:

New Factory Sealed - A brand-new, unused, unopened, undamaged item in its original manufacturer-sealed packaging.

Shipping Information

Secure Payment Process

Return & Refund Policies

Shipping Policies

Warranty Policies

Environmental Requirements

Ambient temperature (operation): -40 … +70 °C
Ambient temperature (storage): -40 … +85 °C
Protection type: IP20
Pollution degree: 2 per IEC 61131-2
Operating altitude: Without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); 5000 m (max.)
Mounting position: Horizontal (standing/lying); vertical
Relative humidity (without condensation): 95 %
Relative humidity (with condensation): Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E-DIN 40046-721-3 (except for wind-driven precipitation, water and ice formation)
Vibration resistance: Per IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3
Shock resistance: Per IEC 60068-2-27 (15g/11 ms/half-sine/1,000 shocks; 25g/6 ms/1,000 shocks), EN 61373
EMC immunity to interference: Per EN 61000-6-1, -2, EN 61131-2, marine applications, EN 60255-26, EN 60870-2-1, EN 61850-3, IEC 61000-6-5, IEEE 1613, VDEW: 1994
EMC emission of interference: Per EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3
Exposure to pollutants: Per IEC 60068-2-42 and IEC 60068-2-43
Permissible H2S contaminant concentration at a relative humidity 75 %: 10 ppm
Permissible SO2 contaminant concentration at a relative humidity 75 %: 25 ppm

Number of digital outputs: 2
Total number of channels (module): 2
Signal type: Digital
Signal type (voltage): 24 VDC
Actuator connection: 2 x (2-wire)
Output characteristic: High-side switching
Switching frequency (max.): 1 kHz
Load type: Resistive, inductive, lamp load
Internal resistance Ri: 285 Ω
Power consumption Pmax.: 2.1 W (at 40 mA output current)
Output data width (internal) max.: 2 bits
Intrinsic safety Ex i: Yes
Supply voltage (system): 5 VDC; via data contacts
Current consumption (5 V system supply): 7 mA
Supply voltage (field): 24 VDC; (Ex i XTR power supply: UO = max. 26.8 V); via power jumper contacts (power supply via blade contact; transmission via spring contact)
Current consumption, field supply (module with no external load): 8.5 mA
Power loss Pl: 1.1 W (at 40 mA output current)
Isolation: 300 VAC system/field
Dielectric strength: 510 VAC/775 VDC; per EN 60870-2-1
Rated surge voltage: 1 kV; Rated surge voltage between intrinsically safe and non-intrinsically safe circuits: 1.5 kV (EN 60079-11)
Indicators: LED (A, E) green: Status DO 1, DO 2
Number of incoming power jumper contacts: 2
Number of outgoing power jumper contacts: 2
Current carrying capacity (power jumper contacts): 1 A
Marking: ATEX/IECEx: II 3 (1) G Ex ec [ia Ga] IIC T4 Gc; II (1) D [Ex ia Da] IIIC; I (M1) [Ex ia Ma] I

Note: The digital output module must only be operated via 24 VDC Ex i XTR power supply (750-606/040-000)!General information (e.g., installation regulations) on explosion protection is available in the WAGO I/O System 750 XTR manuals!

Ex standard: EN/IEC 60079-0, -7, -11
Safety-relevant data (circuit): Uo = 26.8 V; Io = 99.91 mA; Po = 669.43 mW; linear characteristic curve
Reactances Ex ia IIC: Lo = 1.1 mH; Co = 0.092 µF
Reactances Ex ia IIB: Lo = 12 mH; Co = 0.72 µF
Reactances Ex ia IIA: Lo = 21 mH; Co = 2.37 µF
Reactances Ex ia I: Lo = 30 mH; Co = 3.85 µF
Reactances (note): Reactances without accounting for the concurrence of capacitance (Co) and inductance (Lo)