Weidmuller
0595460000
1 / 3
Description
Printed circuit board terminals, 5.08 mm, Number of poles: 24, 90°, Solder pin length (l): 3.5 mm, tinned, orange, TOP connection, Clamping range, max. : 2.5 mm², Box- Part Number
- 0595460000
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Rated Data Acc. To Ul 1059
- Rated voltage (Use group B / UL 1059)
- 300 V
- Rated voltage (Use group D / UL 1059)
- 300 V
- Rated current (Use group B / UL 1059)
- 10 A
- Rated current (Use group D / UL 1059)
- 10 A
- Wire cross-section, AWG, min.
- AWG 26
- Wire cross-section, AWG, max.
- AWG 14
Approvals
- Approvals
- CSA, EAC
- ROHS
- Conform
Dimensions And Weights
- Width
- 123.72 mm
- Width (inches)
- 4.871 inch
- Height
- 22 mm
- Height (inches)
- 0.866 inch
- Height of lowest version
- 18.5 mm
- Depth
- 19.5 mm
- Depth (inches)
- 0.768 inch
- Net weight
- 82.8 g
Rated Data Acc. To Iec
- Tested acc. to standard
- IEC 60664-1, IEC 61984
- Rated current, min. number of poles (Tu=20°C)
- 24 A
- Rated current, max. number of poles (Tu=20°C)
- 19 A
- Rated current, min. number of poles (Tu=40°C)
- 21 A
- Rated current, max. number of poles (Tu=40°C)
- 16 A
- Rated voltage for surge voltage class / pollution degree II/2
- 630 V
- Rated voltage for surge voltage class / pollution degree III/2
- 320 V
- Rated voltage for surge voltage class / pollution degree III/3
- 250 V
- Rated impulse voltage for surge voltage class/ pollution degree II/2
- 2.5 kV
- Rated impulse voltage for surge voltage class/ pollution degree III/2
- 2.5 kV
- Rated impulse voltage for surge voltage class/ contamination degree III/3
- 2.5 kV
- Short-time withstand current resistance
- 3 x 1s with 120 A
Material Data
- Insulating material
- PA
- Colour
- orange
- Colour chart (similar)
- RAL 2000
- Insulating material group
- I
- Comparative Tracking Index (CTI)
- ≥ 600
- Insulation strength
- ≥ 108 Ω
- UL 94 flammability rating
- V-2
- Contact material
- CuZn
- Contact surface
- tinned
- Layer structure of solder connection
- 1.5-3 µm Ni / 4-6 µm Sn
- Storage temperature, min.
- -25 °C
- Storage temperature, max.
- 55 °C
- Max. relative humidity during storage
- 80 %
- Operating temperature, min.
- -50 °C
- Operating temperature, max.
- 100 °C
- Temperature range, installation, min.
- -25 °C
- Temperature range, installation, max.
- 100 °C
Classifications
- ETIM 6.0
- EC002643
- ETIM 7.0
- EC002643
- EClass 9.0
- 27-44-04-01
- EClass 9.1
- 27-44-04-01
- EClass 10.0
- 27-44-04-01
- UNSPSC
- 30-21-18-01
System Parameters
- Product family
- OMNIMATE Signal - series TOP1.5GS
- Wire connection method
- TOP connection
- Mounting onto the PCB
- THT solder connection
- Conductor outlet direction
- 90°
- Pitch in mm (P)
- 5.08 mm
- Pitch in inches (P)
- 0.2 inch
- Number of poles
- 24
- Fitted by customer
- No
- Number of rows
- 1
- Solder pin length (l)
- 3.5 mm
- Solder pin dimensions
- 0.8 x 1.0 mm
- Solder eyelet hole diameter (D)
- 1.3 mm
- Solder eyelet hole diameter tolerance (D)
- + 0,1 mm
- Number of solder pins per pole
- 2
- Screwdriver blade
- 0.6 x 3.5
- Screwdriver blade standard
- DIN 5264
- Tightening torque, min.
- 0.4 Nm
- Tightening torque, max.
- 0.5 Nm
- Clamping screw
- M 2.5
- Stripping length
- 10 mm
- L1 in mm
- 116.84 mm
- L1 in inches
- 4.6 inch
- Touch-safe protection acc. to DIN VDE 0470
- IP 20
- Touch-safe protection acc. to DIN VDE 57 106
- Safe from finger touch
- Volume resistance
- 1.20 mΩ
- Insulation strength
- ≥ 108 Ω
Packing
- Packaging
- Box
- VPE length
- 60 mm
- VPE width
- 80 mm
- VPE height
- 130 mm
Notes
- Notes
- Additional colours on request Rated current related to rated cross-section & min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 Crimp form A for wire end ferrules with PZ 6/5 crimping tool are recommended for the largest cable sizes. P on drawing = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
- IPC conformity
- Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.
Conductors Suitable For Connection
- Clamping range, min.
- 0.13 mm²
- Clamping range, max.
- 2.5 mm²
- Wire connection cross section AWG, min.
- AWG 26
- Wire connection cross section AWG, max.
- AWG 14
- Solid, min. H05(07) V-U
- 0.5 mm²
- Solid, max. H05(07) V-U
- 2.5 mm²
- Flexible, min. H05(07) V-K
- 0.5 mm²
- Flexible, max. H05(07) V-K
- 2.5 mm²
- W. plastic collar ferrule, DIN 46228 pt 4, min.
- 0.5 mm²
- W. plastic collar ferrule, DIN 46228 pt 4, max.
- 2.5 mm²
- W. wire end ferrule, DIN 46228 pt 1, min.
- 0.5 mm²
- W. wire end ferrule, DIN 46228 pt 1, max.
- 2.5 mm²
- Plug gauge in accordance with EN 60999 a x b; ø
- 2.4 mm x 1.5 mm
- Max. clamping range
- 2.5 mm²
Rated Data Acc. To Csa
- Institute (CSA)
- CSA
- Certificate No. (CSA)
- 154685-1501716
- Rated voltage (Use group B / CSA)
- 300 V
- Rated voltage (Use group D / CSA)
- 300 V
- Rated current (Use group B / CSA)
- 10 A
- Rated current (Use group D / CSA)
- 10 A
- Wire cross-section, AWG, min.
- AWG 26
- Wire cross-section, AWG, max.
- AWG 14
- Reference to approval values
- Specifications are maximum values, details - see approval certificate.
Related products
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther