Weidmuller

1481970000

1 / 8
thumbnail
thumbnail
thumbnail
thumbnail
thumbnail
thumbnail
thumbnail
thumbnail

Description

ACT20P, Signal converter/insulator, Signal converter/isolator, universal, 24…230 V AC/DC power supply
Part Number
1481970000
€239.18
net
Shipping from:
€25.00
1
Payment methods:
Best offer from:
ITTrusted Automa.Net Supplier
Availability:
1 pc.
In-Stock
Updated at: 22-11-2024
Warranty:
12 months
Estimated Delivery:
27 November - 02 December to United Kingdom
Condition:
New Factory Sealed
New Factory Sealed - A brand-new, unused, unopened, undamaged item in its original manufacturer-sealed packaging.
Shipping Information
Secure Payment Process
Return & Refund Policies
Shipping Policies
Warranty Policies

General Data

Accuracy
< 0.05 % of measuring range
Configuration
DIP switch, or via display and push-buttons
Galvanic isolation
3-way isolator, between input ⁄ output ⁄ supply
Power consumption
≤2.3 W
Rail
TS 35
Step response time
≤50 µs
Temperature coefficient
≤0,01% des Messbereichs⁄°C
Voltage supply
24…230 V DC ±20 %, 24…230 V AC ±10 % @ 48…62 Hz

Probability Of Failure

MTBF
76 Years

Approvals

ROHS
Conform

Display

Type
Dot-matrix display with ticker text, green
Display value
current measured value, Configuration data

Dimensions And Weights

Width
12.5 mm
Width (inches)
0.492 inch
Height
119.2 mm
Height (inches)
4.693 inch
Depth
113.7 mm
Depth (inches)
4.476 inch
Weight
130 g
Net weight
130 g

Connection Data

Type of connection
Screw connection
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.6 Nm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2.5 mm²
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section AWG, max.
AWG 12

Input

Number of inputs
1
Input signal
Voltage source, Current source
Input voltage
configurable, ±40 mV…±300 V, Measuring range. min 40 mV
Input resistance, voltage
approx. 1 MΩ
Input current
configurable, ± 0.1mA...± 100 mA
Input resistance, current
< 5 mA: approx. 100 Ω; >5 mA: approx. 5 Ω

Classifications

ETIM 6.0
EC002653
ETIM 7.0
EC002653
EClass 9.0
27-21-01-20
EClass 9.1
27-21-01-20
EClass 10.0
27-21-01-20

Output

Output voltage, note
Adjustable, 0...±10 V
Output current
Adjustable, 0...±20 mA
Cut-off frequency (-3 dB)
> 10 kHz/ < 10 Hz
Load impedance voltage
≥ 1 kΩ
Load impedance current
≤ 600 Ω
Offset voltage
< 10 mV
Offset current
20 µA
Status indicator
Green LED

Product Information

Product information
The universally configurable DC isolating amplifier ACT20P-PRO DCDC II isolates and converts analogue signals. An analogue input signal (current or voltage) is linearly converted into an analogue output signal (current or voltage) and galvanically isolated. The power supply is galvanically isolated from the input and output (3-way isolation). Properties universal wide-range voltage supply universally configurable via DIP switch or via the LED display using control buttons Active or passive signal output Operating status display on a front panel LED Galvanic 3-way isolation between input, output and supply.

Environmental Product Compliance

REACH SVHC
Lead 7439-92-1

Data For Ex Applications (Atex)

Marking
II 3 G Ex nA IIC T4 Gc

Insulation Coordination

EMC standards
EN 60079-0, EN 60079-15, EN 61010-1, EN 61140, EN 61326-1, UL 61010-1, SN29500 for MTBF
Galvanic isolation
3-way isolator, between input ⁄ output ⁄ supply
Impulse withstand voltage
5 kV (1.2/50 µs)
Insulation voltage
4 kVeff, input ⁄ output ⁄ power supply
Pollution severity
2
Rated voltage
600 V
Surge voltage category
II

Temperatures

Operating temperature, max.
70 °C
Operating temperature, min.
-25 °C
Storage temperature, max.
85 °C
Storage temperature, min.
-40 °C
Operating temperature
-25 °C...70 °C
Storage temperature
-40 °C...85 °C

Ratings Iecex/Atex/Cul

Certificate No. (ATEX)
DEMKO15ATEX1397X