Weidmuller
2476900000
1 / 7
Description
D-SERIES DRI, Relay module, Number of contacts: 2 CO contact with test button AgNi, Rated control voltage: 48 V DC, Continuous current: 5 A, Screw connection- Part Number
- 2476900000
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
General Data
- Rail
- TS 35
- Test button
- yes (lockable)
- Mechanical switch position indicator
- Yes
- Colour
- black
Approvals
- Approvals
- CE, EAC
Dimensions And Weights
- Width
- 15.8 mm
- Width (inches)
- 0.622 inch
- Height
- 80.2 mm
- Height (inches)
- 3.157 inch
- Depth
- 68 mm
- Depth (inches)
- 2.677 inch
- Net weight
- 64 g
Connection Data
- Wire connection method
- Screw connection
- Stripping length, rated connection
- 8 mm
- Tightening torque, min.
- 0.5 Nm
- Tightening torque, max.
- 0.8 Nm
- Clamping range, rated connection
- 1.5 mm²
- Clamping range, min.
- 0.25 mm²
- Clamping range, max.
- 4 mm²
- Wire cross-section, solid, min.
- 0.25 mm²
- Wire cross-section, solid, max.
- 4 mm²
- Wire connection cross-section, finely stranded, min.
- 0.25 mm²
- Wire connection cross section, finely stranded, max.
- 4 mm²
- Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
- 0.25 mm²
- Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
- 4 mm²
- Conductor cross-section, flexible, AEH (DIN 46228-1), min.
- 0.25 mm²
- Conductor cross-section, flexible, AEH (DIN 46228-1), max.
- 4 mm²
- Blade size
- size PH1
- Gauge to IEC 60947-1
- A3
Contact Data
- Contact type
- 2 CO contact with test button (AgNi)
- Mechanical service life
- 10 x 106 switching cycles
Input
- Rated control voltage
- 48 V DC
- Rated current DC
- 11,2 mA
- Power rating
- 530 mW
- Pull-in/drop-out voltage, typ.
- 36 V / 7.2 V DC
- Coil resistance
- 4300 Ω ± 10 %
- Status indicator
- Green LED
- Protective circuit
- Free-wheeling diode
Classifications
- ETIM 6.0
- EC001437
- ETIM 7.0
- EC001437
- EClass 9.0
- 27-37-16-01
- EClass 9.1
- 27-37-16-01
- EClass 10.0
- 27-37-16-01
Output
- Rated switching voltage
- 250 V AC
- Max. switching voltage, AC
- 250 V
- Max. switching voltage, DC
- 250 V
- Continuous current
- 5 A
- AC switching capacity (resistive), max.
- 1250 VA
- DC switching capacity (resistive), max.
- 150 W @ 24 V
- Switch-on delay
- ≤ 15 ms
- Switch-off delay
- ≤ 10 ms
- Min. switching power
- 10 mA @ 12 V, 100 mA @ 5 V
- Max. switching frequency at rated load
- 0.1 Hz
Environmental Product Compliance
- REACH SVHC
- Lead 7439-92-1
Insulation Coordination
- Rated voltage
- 250 V
- Surge voltage category
- III
- Pollution severity
- 2
- Insulating material group
- IIIb
- Protection degree
- IP20
- Dielectric strength, Input/Output
- 4 kVeff / 1 min
- Creepage and clearance distance input – output
- ≥ 3 mm
- Dielectric strength of neighbouring contacts
- 1.5 kVeff /1 min.
- Dielectric strength of open contact
- 1 kVeff / 1 min
- Impulse withstand voltage
- 4.8 kV (1.2/50 µs)
Temperatures
- Humidity
- 35...85 % rel. humidity, no condensation
- Operating temperature, max.
- 55 °C
- Operating temperature, min.
- -40 °C
- Storage temperature, max.
- 85 °C
- Storage temperature, min.
- -40 °C
- Operating temperature
- -40 °C...55 °C
- Storage temperature
- -40 °C...85 °C
Further Details Of Approvals / Standards
- Standards
- IEC 61810-1, EN 60664-1:2007, EN 61000-6-2:2005, EN 61000-6-4:2007 + A1:2011
- Certificate no. (cURus) relay
- E312083
- Certificate no. (cURus) base
- E355547
Related products
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther