8432250000

1 / 3

Description

RTD transformer, Tension-clamp connection

Part Number: 8432250000

Get up to 90 days payment terms from 500+ suppliers
Reselling discounts up to 40%!

Send request for price

1

Payment methods:

Request a Quote and we will send you information on availability and price.

General Data

Accuracy: 100K ≤ MB < 600K: 0,.1 %; MB ≥ 600K: 0.2 %; of the MB
Configuration: DIP switch, Potentiometer, and PT100-Simulator
Current consumption: < 38 mA @ IOUT = 20 mA
Current-carrying capacity of cross-connect.: ≤ 2 A
Galvanic isolation: Without isolation
Input/Output: PT100/ 0...10 V
Linearity: Yes
Rail: TS 35
Temperature coefficient: Measuring range ≥ 200 K: ≤ 200 ppm/K (typ. 80 ppm/K)100 K < = measuring range < 200 K: < 225 ppm/K (typ. 90 ppm/K)
Voltage supply: 24 V DC ± 20 %

Approvals

Approvals: CE, CSA, CULUS
ROHS: Conform
UL File Number Search: E141197

Dimensions And Weights

Length: 92.4 mm
Length (inches): 3.638 inch
Width: 12.5 mm
Width (inches): 0.492 inch
Depth: 112.4 mm
Depth (inches): 4.425 inch
Net weight: 127 g

Connection Data

Type of connection: Tension-clamp connection
Stripping length, rated connection: 7 mm
Clamping range, rated connection: 1.5 mm²
Clamping range, min.: 0.5 mm²
Clamping range, max.: 2.5 mm²

Tender Specification Sheets

Long specification: PT100 temperature measuring transformer, configured with DIP switches, 4-wire connection technologyRTD measurement isolating transformer in 12.5 mm width with external power supply,for transmitting PT100 4-wire signals.Input temperature range -200...+800 °C.Analogue DC signals 0...10 V are available on the output side.Zero/span compensation with potentiometer. Add-on housing for TS35 rail mountingDimensions: L/W/H 92.4/ 12.5/ 112.4 mmTension-clamp connection / Nominal cross-section 1.5 mm2Protection degree: IP 20 Input PT100, 4-wireOutput 0...10 VLoad resistance > 1 kOhm Transmission error < 0,5 % v. E. typ. 200 ppm / °CAuxiliary power 24 VDC +/- 20 %Ambient temperature range 0°C...+55 °CIsolation no electrical isolationApprovals cULus, CSAType WTZ4 PT100/4 C 0-10V
Short specification: PT100 temperature measuring transformer, configured with DIP switches, 4-wire connection technologyRTD measurement isolating transformer in 12.5 mm width with external power supply,for transmitting PT100 4-wire signals.Input temperature range -200...+800 °C.Analogue DC signals 0...10 V are available on the output side.Zero/span compensation with potentiometer.

Input

Number of inputs: 1
Sensor: PT100 / 2-/3-/4-wire
Sensor supply: 1.45 mA
Temperature input range: Adjustable from -200...+800°C

Classifications

ETIM 6.0: EC002919
ETIM 7.0: EC002919
EClass 9.0: 27-21-01-29
EClass 9.1: 27-21-01-29
EClass 10.0: 27-21-01-29
UNSPSC: 30-21-18-01

Output

Number of outputs: 1
Output voltage, note: 0...10 V
Load impedance voltage: ≥ 1 kΩ

Product Information

Product information: This product will soon be replaced by a new product.Please do not use with new systems. Please contact our technical support.

Environmental Product Compliance

REACH SVHC: Lead 7439-92-1

Insulation Coordination

EMC standards: EN 55011, EN 61000-6
Galvanic isolation: Without isolation

Temperatures

Operating temperature, max.: 55 °C
Operating temperature, min.: 0 °C
Storage temperature, max.: 85 °C
Storage temperature, min.: -20 °C
Operating temperature: 0 °C...55 °C
Storage temperature: -20 °C...85 °C

Ratings Iecex/Atex/Cul

Certificate no. (cULus): E141197

Related products